Rivista
/
Ingegneria
/
Atmospheric Pressure Fabrication of Large-Sized Single-Layer Rectangular SnSe Flakes
JoVE Journal
Ingegneria
È necessario avere un abbonamento a JoVE per visualizzare questo.  Accedi o inizia la tua prova gratuita.
JoVE Journal Ingegneria
Atmospheric Pressure Fabrication of Large-Sized Single-Layer Rectangular SnSe Flakes

Atmospheric Pressure Fabrication of Large-Sized Single-Layer Rectangular SnSe Flakes

DOI:
10.3791/57023-v

•

11:21 min

•

March 21, 2018

•

, , ,
1SZU-NUS Collaborative Innovation Center for Optoelectronic Science & Technology, Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province, College of Optoelectronic Engineering,Shenzhen University, 2Department of Physics,National University of Singapore, 3NUS Graduate School for Integrative Sciences and Engineering,Centre for Life Sciences, 4Centre for Advanced 2D Materials and Graphene Research Centre,National University of Singapore

Capitoli

  • 00:04Titolo
  • 01:31Auto-tune Function of Temperature Controller Parameters
  • 02:23Pretreatment of Quartz Tubes, Ceramic Boats, and SiO2/Si Substrates
  • 03:47Synthesis of Bulk Rectangular Shaped SnSe Flakes
  • 06:06Fabrication of Single-layer Rectangular Shaped SnSe Flakes
  • 08:12Results: Fabrication of Single-layer SnSe Flakes on SiO2/Si Substrates
  • 10:04Conclusion

Summary

Traduzione automatica

Traduzione automatica

A protocol is presented demonstrating a two-step fabrication technique to grow large-sized single-layer rectangular shaped SnSe flakes on low-cost SiO2/Si dielectrics wafers in an atmospheric pressure quartz tube furnace system.

Tags

1. Atmospheric Pressure Fabrication2. Single-layer Rectangular SnSe Flakes3. Vapor Transport Deposition4. Nitrogen Etching5. Two-dimensional Materials6. Tin Selenide7. Horizontal Tube Furnace8. Quartz Tube9. Ceramic Boat10. Dielectric Substrate11. Self-limiting Nitrogen Etching12. Large-size Single-layer Flakes13. Low-cost Silicon Dioxide Silicon Dielectrics14. Tungsten Diselenide15. High-production Under Nitrogen Atmosphere

Article

Embed

AGGIUNGI ALLA PLAYLIST

Usage Statistics

Video correlati

Fabrication of Spatially Confined Complex Oxides

Synthesis and Microdiffraction at Extreme Pressures and Temperatures

Fabrication and Testing of Microfluidic Optomechanical Oscillators

How to Ignite an Atmospheric Pressure Microwave Plasma Torch without Any Additional Igniters

Blast Quantification Using Hopkinson Pressure Bars

Fabrication and Characterization of Superconducting Resonators

An Atmospheric Pressure Plasma Setup to Investigate the Reactive Species Formation

New Application of an Atmospheric Pressure Plasma Jet as a Neuro-protective Agent Against Glucose Deprivation-induced Injury of SH-SY5Y Cells

Fabrication of Compressed Hosiery and Measurement of its Pressure Characteristic Exerted on the Lower Limbs

Microfluidic Fabrication Techniques for High-Pressure Testing of Microscale Supercritical CO2 Foam Transport in Fractured Unconventional Reservoirs

Read Article