Rivista
/
Ingegneria
/
Measurements of Soil Carbon by Neutron-Gamma Analysis in Static and Scanning Modes
JoVE Journal
Ingegneria
È necessario avere un abbonamento a JoVE per visualizzare questo.  Accedi o inizia la tua prova gratuita.
JoVE Journal Ingegneria
Measurements of Soil Carbon by Neutron-Gamma Analysis in Static and Scanning Modes

Measurements of Soil Carbon by Neutron-Gamma Analysis in Static and Scanning Modes

DOI:
10.3791/56270-v

•

07:51 min

•

August 24, 2017

•

, , ,
1National Soil Dynamics Laboratory,Agricultural Research Service, United States Department of Agriculture

Capitoli

  • 00:05Titolo
  • 00:53Inelastic Neutron Scattering (INS) System Preparation
  • 02:34INS System Calibration
  • 05:17Field Soil Measurements
  • 06:08Results: Field Measurements of Carbon Content
  • 07:00Conclusion

Summary

Traduzione automatica

Traduzione automatica

Here, we present the protocol for in situ measurement of soil carbon using the neutron-gamma technique for single point measurements (static mode) or field averages (scanning mode). We also describe system construction and elaborate data treatment procedures.

Tags

Soil CarbonNeutron-gamma AnalysisStatic ModeScanning ModeInelastic Neutron ScatteringGamma Ray AnalysisSoil Carbon MeasurementRestricted AreaNeutron GeneratorPower LevelData AcquisitionDetector CalibrationCaesium-137 SourceCalibration PitsSand-carbon Mixtures

Article

Embed

AGGIUNGI ALLA PLAYLIST

Usage Statistics

Video correlati

Fabrication, Densification, and Replica Molding of 3D Carbon Nanotube Microstructures

Speciation and Bioavailability Measurements of Environmental Plutonium Using Diffusion in Thin Films

Quantification of Hydrogen Concentrations in Surface and Interface Layers and Bulk Materials through Depth Profiling with Nuclear Reaction Analysis

In Depth Analyses of LEDs by a Combination of X-ray Computed Tomography (CT) and Light Microscopy (LM) Correlated with Scanning Electron Microscopy (SEM)

Comprehensive Characterization of Extended Defects in Semiconductor Materials by a Scanning Electron Microscope

Scanning SQUID Study of Vortex Manipulation by Local Contact

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent

Precision Milling of Carbon Nanotube Forests Using Low Pressure Scanning Electron Microscopy

High Temperature Fabrication of Nanostructured Yttria-Stabilized-Zirconia (YSZ) Scaffolds by In Situ Carbon Templating Xerogels

Fabrication of 3D Carbon Microelectromechanical Systems (C-MEMS)

Read Article