Rivista
/
Ingegneria
/
Fabrication of 1-D Photonic Crystal Cavity on a Nanofiber Using Femtosecond Laser-induced Ablation
JoVE Journal
Ingegneria
È necessario avere un abbonamento a JoVE per visualizzare questo.  Accedi o inizia la tua prova gratuita.
JoVE Journal Ingegneria
Fabrication of 1-D Photonic Crystal Cavity on a Nanofiber Using Femtosecond Laser-induced Ablation

Fabrication of 1-D Photonic Crystal Cavity on a Nanofiber Using Femtosecond Laser-induced Ablation

DOI:
10.3791/55136-v

•

13:02 min

•

February 25, 2017

•

, ,
1Center for Photonic Innovations,University of Electro-Communications

Capitoli

  • 00:05Titolo
  • 01:11Nanofiber Preparation
  • 03:29The Femtosecond Laser Setup
  • 04:31Femtosecond Laser Fabrication Setup Alignment
  • 06:17Fabrication of an Apodized Photonic Crystal Cavity
  • 08:33Fabrication of Defect-induced Photonic Crystal Cavity
  • 10:56Results: Transmission Spectra of 1-D Photonic Crystal Cavities Produced by Femtosecond Laser-induced Ablation
  • 12:24Conclusion

Summary

Traduzione automatica

Traduzione automatica

We present a protocol for fabricating 1-D photonic crystal cavities on subwavelength diameter silica fibers (optical nanofibers) using femtosecond laser-induced ablation.

Tags

1D Photonic Crystal CavityNanofiberFemtosecond Laser AblationOptical FabricationNanophotonicsQuantum Information ScienceCylindrical LensMechanical StabilityNanofiber ProductionSingle-mode Optical FiberFiber Coating StripperMethanolAcetoneCleanroom WipesUV Curable EpoxyNanofiber Holder

Article

Embed

AGGIUNGI ALLA PLAYLIST

Usage Statistics

Video correlati

Fabrication And Characterization Of Photonic Crystal Slow Light Waveguides And Cavities

Measurement of Coherence Decay in GaMnAs Using Femtosecond Four-wave Mixing

Using Microwave and Macroscopic Samples of Dielectric Solids to Study the Photonic Properties of Disordered Photonic Bandgap Materials

Laser-induced Forward Transfer for Flip-chip Packaging of Single Dies

Laser-induced Forward Transfer of Ag Nanopaste

Resonance Fluorescence of an InGaAs Quantum Dot in a Planar Cavity Using Orthogonal Excitation and Detection

Preparation of Large-area Vertical 2D Crystal Hetero-structures Through the Sulfurization of Transition Metal Films for Device Fabrication

A Fabrication and Measurement Method for a Flexible Ferroelectric Element Based on Van Der Waals Heteroepitaxy

Fabrication of Magnetic Nanostructures on Silicon Nitride Membranes for Magnetic Vortex Studies Using Transmission Microscopy Techniques

Quantitative Analysis of Vacuum Induction Melting by Laser-induced Breakdown Spectroscopy

Read Article