Rivista
/
Ingegneria
/
Preparation and 3D Tracking of Catalytic Swimming Devices
JoVE Journal
Ingegneria
This content is Free Access.
JoVE Journal Ingegneria
Preparation and 3D Tracking of Catalytic Swimming Devices

Preparation and 3D Tracking of Catalytic Swimming Devices

DOI:
10.3791/54247-v

•

06:50 min

•

July 01, 2016

•

, ,
1Department of Chemical and Biological Engineering,University of Sheffield

Capitoli

  • 00:05Titolo
  • 00:36Making Catalytic Janus Particles
  • 02:133D Analysis of Janus Colloid “Swimming”
  • 04:43Results: Analysis of Colloid Particle Trajectory in 3D
  • 06:03Conclusion

Summary

Traduzione automatica

Traduzione automatica

A method to prepare catalytically active Janus colloids that can "swim" in fluids and determine their 3D trajectories is presented.

Tags

3D TrackingCatalytic Swimming DevicesFluorescence MicroscopyJanus ParticlesPlatinum CoatingColloidal DispersionSpin CoatingHydrogen PeroxideSuspension

Article

Embed

AGGIUNGI ALLA PLAYLIST

Usage Statistics

Video correlati

High-resolution, High-speed, Three-dimensional Video Imaging with Digital Fringe Projection Techniques

Analysis of Contact Interfaces for Single GaN Nanowire Devices

Thermal Measurement Techniques in Analytical Microfluidic Devices

Fabrication and Operation of Acoustofluidic Devices Supporting Bulk Acoustic Standing Waves for Sheathless Focusing of Particles

Fabrication of Fully Solution Processed Inorganic Nanocrystal Photovoltaic Devices

Solvent Bonding for Fabrication of PMMA and COP Microfluidic Devices

Scanning Light Scattering Profiler (SLPS) Based Methodology to Quantitatively Evaluate Forward and Backward Light Scattering from Intraocular Lenses

Preparation of Liquid Crystal Networks for Macroscopic Oscillatory Motion Induced by Light

Fabrication of Refractive-index-matched Devices for Biomedical Microfluidics

Fabrication of Nanoheight Channels Incorporating Surface Acoustic Wave Actuation via Lithium Niobate for Acoustic Nanofluidics

Read Article