Preparation of Contiguous Bisaziridines for Regioselective Ring-Opening Reactions

Yeongjin Lee; Huimyoung Byeon; Hyun-Joon Ha; Jung Woon Yang

doi:10.3791/64019

JoVE Journal > Chemistry

Chimica

Preparation of Contiguous Bisaziridines for Regioselective Ring-Opening Reactions

Published: July 28, 2022

doi:

10.3791/64019

Yeongjin Lee¹, Huimyoung Byeon¹, Hyun-Joon Ha², Jung Woon Yang¹

¹Department of Energy Science,Sungkyunkwan University, ²Department of Chemistry,Hankuk University of Foreign Studies

Summary

Contiguous bisaziridines containing non-activated and activated aziridines were synthesized by asymmetric organocatalytic aziridinations and then subjected to chemoselective ring-opening reactions under acidic or basic conditions. The non-activated aziridine ring opens with less reactive nucleophiles under acidic conditions, whereas the activated aziridine ring opens with more reactive nucleophiles under basic conditions.

Abstract

Aziridines, a class of reactive organic molecules containing a three-membered ring, are important synthons for the synthesis of a large variety of functionalized nitrogen-containing target compounds through the regiocontrolled ring-opening of C-substituted aziridines. Despite the tremendous progress in aziridine synthesis over the past decade, accessing contiguous bisaziridines efficiently remains difficult. Therefore, we were interested in synthesizing contiguous bisaziridines bearing an electronically diverse set of N-substituents beyond the single aziridine backbone for regioselective ring-opening reactions with diverse nucleophiles. In this study, chiral contiguous bisaziridines were prepared by organocatalytic asymmetric aziridination of chiral (E)-3-((S)-1-((R)-1-phenylethyl)aziridin-2-yl)acrylaldehyde with N-Ts-O-tosyl or N-Boc-O-tosyl hydroxylamine as the nitrogen source in the presence of (2S)-[diphenyl(trimethylsilyloxy)methyl]pyrrolidine as a chiral organocatalyst. Also demonstrated here are representative examples of regioselective ring-opening reactions of contiguous bisaziridines with a variety of nucleophiles such as sulfur, nitrogen, carbon, and oxygen, and the application of contiguous bisaziridines to the synthesis of multi-substituted chiral pyrrolidines by Pd-catalyzed hydrogenation.

Introduction

Rational design of small organic molecules with diverse reactive sites that precisely control product selectivity is a key goal in modern organic synthesis and green chemistry¹^,²^,³^,⁴^,⁵^,⁶^,⁷^,⁸. To achieve this goal, we were interested in the modular synthesis of aziridines. Aziridines are of interest to most organic chemists, owing to their structurally important framework⁹ with an electronically diverse set of N-substituents that can lead to regioselective ring-opening reactions with multiple nucleophiles¹⁰^,¹¹^,¹²^,¹³^,¹⁴^,¹⁵^,¹⁶^,¹⁷^,¹⁸^,¹⁹, and varied pharmacological activities such as antitumor, antimicrobial, and antibacterial properties. Despite the advances in aziridine chemistry, non-activated aziridine and activated aziridine have independent syntheses and ring-opening reactions in the literature²⁰.

Therefore, we aimed to synthesize contiguous bisaziridines comprising both the non-activated and activated aziridines. These contiguous bisaziridines can be used to systematically rationalize a chemoselective ring-opening pattern based on the following electronic properties of the two different aziridines and their reactivity to nucleophiles²⁰^,²¹^,²²^,²³^,²⁴: a) activated aziridines, in which the electron-withdrawing substituents conjugatively stabilize the negative charge on the nitrogen, readily react with multiple nucleophiles to allow ring-opened products; b) non-activated aziridines, in which the nitrogen is bound to the electron-donating substituents, are considerably inert toward nucleophiles; hence, a pre-activation step with a suitable activator (mainly Brønsted or Lewis acids) is required to afford the ring-opened products in high yields²⁰^,²¹^,²⁵^,²⁶.

The present study describes the rational design of contiguous bisaziridines as chiral building blocks via transition-metal-free organocatalysis and the synthesis of diverse nitrogen-rich molecules utilizing predictive modeling tools for ring-opening reactions of bisaziridines. This study aims to stimulate the advancement of practical methods for the construction of nitrogen-enriched bioactive compounds and natural products and the polymerization of aziridines.

Protocol

The details of all the synthesized products (1-5), including the structure, full NMR spectra, optical purity, and HRMS-MALDI data, are provided in Supplementary File 1.

1. Synthesis of 3-(aziridin-2-yl)acryl aldehyde (1a)

Flame dry a 50 mL round-bottomed flask equipped with a stirrer bar and a septum under vacuum conditions. Cool it to room temperature while filling it with argon gas.
Add anhydrous toluene (19 mL) and (R)-1-((R)-1-phenylethyl)aziridine-2-carbaldehyde (1.00 g, 5.71 mmol) (see Table of Materials) to the flask. Then, stir the solution for 1 min.
Add (triphenylphosphoranylidene)acetaldehyde (2.08 g, 6.85 mmol) (see Table of Materials) to the stirred solution.
Heat the reaction mixture at 60 °C for 18 h. Then, cool the reaction mixture to room temperature and remove volatile solvent from the reaction mixture under reduced pressure.
Monitor the reaction progress by TLC using ethyl acetate:hexanes (1:6 v/v, R_f = 0.25) as an eluent.
Purify the crude product by silica gel flash chromatography with ethyl acetate:hexanes (1:6 v/v) as the eluent to isolate pure product 1a (see Supplementary File 1) as a yellow liquid.
Confirm the product by NMR and polarimeter measurements (see steps 8 and 9 for measurement methods).

2. Synthesis of contiguous bisaziridine (2a)

Flame dry a 50 mL round-bottomed flask with a stirrer bar and a septum under vacuum conditions. Cool it to room temperature while filling it with argon gas.
Add anhydrous ethyl acetate (3 mL) and 1a (step 1.6, 201 mg, 1.0 mmol) to the flask, and then stir the solution for 1 min.
Add catalyst (S)-2-(diphenyl((trimethylsilyl)oxy)methyl)pyrrolidine (B_S, see Table of Materials) (0.02 mL, 7 mol%) to the mixture and stir at room temperature for 30 min.
Add 316 mg, 1.10 mmol of tert-butyl tosyloxycarbamate (BocNHOTs, see Table of Materials) and 123 mg, 1.50 mmol of sodium acetate to the reaction mixture and stir for 24 h.
Monitor the reaction progress by TLC using diethyl ether:hexanes (1:4 v/v, R_f = 0.27) as an eluent.
Extract the reaction mixture with ethyl acetate (3 x 50 mL) in a separatory funnel.
Dry the combined organic layer over anhydrous Na₂SO₄, filter, and concentrate in vacuo.
Purify the resulting crude product by flash chromatography on silica gel with diethyl ether:hexanes (1:4 v/v) as eluent to isolate pure product 2a (see Supplementary File 1) as a yellow liquid.
Confirm the product by NMR and polarimeter measurements (see steps 8 and 9).

3. Synthesis of compound 3

Flame dry a 50 mL round-bottomed flask with a stirrer bar and a septum under vacuum conditions. Cool it to room temperature while filling it with argon gas.
Add anhydrous methanol (11 mL) and aldehyde 2a (step 2.8, 1.00 g, 3.16 mmol) [or 2b (1.17 g, 3.16 mmol, see Supplementary File 1)] to the flask, and then stir the solution for a minute.
Add NaBH₄ (95 mg, 2.53 mmol) to the stirred solution.
Stir the reaction mixture at 0 °C for 1 h.
Monitor the reaction progress by TLC using ethyl acetate:hexanes (1:4 v/v, R_f = 0.27) as an eluent.
After 1 h, quench the reaction mixture with distilled water and extract with ethyl acetate (3 x 50 mL) in a separatory funnel.
Dry the combined organic layer over anhydrous Na₂SO₄, filter, and concentrate in vacuo.
Purify the crude residue by silica gel flash chromatography with ethyl acetate:hexanes (1:4 v/v) as the eluent to isolate pure products 3a [or 3b] (see Supplementary File 1) as a yellow liquid.
Confirm the product by NMR and polarimeter measurements (see steps 8 and 9).

4. Synthesis of compound 4

Flame dry a 50 mL round-bottomed flask with a stirrer bar and a septum under vacuum conditions. Cool it to room temperature while filling it with argon gas.
Add anhydrous dichloromethane (11 mL) and alcohol 3a (step 3.8, 1.00 g, 3.14 mmol) [or 3b (1.17 g, 3.14 mmol)] to the flask, and then stir the solution for a minute.
Add tert-butyldimethylsilyl chloride (TBSCl, 520 mg, 3.45 mmol) and imidazole (427 mg, 6.28 mmol) (see Table of Materials) to the stirred solution.
Stir the reaction mixture at 0 °C for 18 h.
Monitor the reaction progress by TLC using ethyl acetate:hexanes (1:4 v/v, R_f = 0.26) as an eluent.
After 18 h, quench the reaction mixture with deionized water and extract with methylene chloride (3 x 50 mL) in a separatory funnel.
Dry the combined organic layer over the anhydrous sodium sulfate, filter, and then concentrate under reduced pressure.
Purify the crude residue by silica gel flash chromatography with ethyl acetate:hexanes (1:4 v/v) as the eluent to isolate pure products 4a [or 4b] (see Supplementary File 1) as a yellow liquid.
Confirm the product by NMR and polarimeter measurements.

5. Selective ring-opening of non-activated aziridines: Synthesis of 5d

Flame dry a 50 mL round-bottomed flask with a stirrer bar and a septum under vacuum conditions. Cool it to room temperature while filling it with argon gas.
Add 3b (step 4.2, 100 mg, 0.27 mmol) and acetic acid (0.12 mL, 2.14 mmol) to the flask, and then stir the mixture at room temperature for 5 h.
Monitor the reaction progress by TLC using ethyl acetate:hexanes (2:3 v/v, R_f = 0.28) as an eluent.
After 5 h, remove the acetic acid in vacuo.
Purify the crude residue by silica gel flash chromatography with ethyl acetate:hexanes (2:3 v/v) as the eluent to isolate pure product 5d (see Supplementary File 1) as a yellow liquid.
Confirm the product by NMR and polarimeter measurements.

6. Selective ring-opening of activated aziridines: Synthesis of 5f

Flame dry a 50 mL round-bottomed flask with a stirrer bar and a septum under vacuum conditions. Cool it to room temperature while filling it with argon gas.
Add anhydrous methanol (8 mL) and 4b (step 4.8, 100 mg, 0.21 mmol) to the flask, and then stir the solution for 1 min.
Add NaN₃ (39 mg, 0.6 mmol) and NH₄Cl (21 mg, 0.41 mmol) in H₂O (1 mL) to the above solution.
Stir the reaction mixture at 0 °C for 4 h.
Monitor the reaction progress by TLC using ethyl acetate:hexanes (1:4 v/v, R_f = 0.30) as an eluent.
After 4 h, quench the reaction mixture with H₂O and extract with ethyl acetate (3 x 50 mL) in a separatory funnel.
Dry the combined organic layer over anhydrous Na₂SO₄, filter, and concentrate in vacuo.
Purify the crude residue by silica gel flash chromatography with ethyl acetate:hexanes (1:4 v/v) as the eluent to isolate pure product 5f (see Supplementary File 1) as a yellow liquid.
Confirm the product by NMR and polarimeter measurements.

7. Pd-catalyzed hydrogenation of contiguous aziridines: Synthesis of 5h

Flame dry a 50 mL round-bottomed flask with a stirrer bar and a septum under vacuum conditions. Cool it to room temperature while filling it with argon gas.
Add anhydrous methanol (5 mL), 2b (step 3.2, 100 mg, 0.27 mmol), Boc₂O (70 mg, 0.32 mmol), and 20% Pd(OH)₂/C (37 mg) to the flask.
Stir the mixture under H₂ atmosphere (balloon, 1 atm) at room temperature for 12 h.
Monitor the reaction progress by TLC using ethyl acetate:hexanes (2:3 v/v, R_f = 0.29) as an eluent.
Filter the reaction mixture through a commercially available celite pad (see Table of Materials) and wash with methanol.
Evaporate in vacuo the filtrate and purify the residue by silica gel flash chromatography with ethyl acetate:hexanes (2:3 v/v) as the eluent to isolate pure product 5h (see Supplementary File 1) as a colorless liquid.
Confirm the product by NMR and polarimeter measurements.

8. Polarimeter analysis

Prepare an appropriate amount of the sample (~100 mg) to be measured.
Dissolve the prepared sample in CHCl₃ (c 0.05-1.00).
Transfer the sample solution into the sample chamber, ensuring that there are no air bubbles
[ø = 1.8 mm, l = 10^-1 m].
Load the sample chamber into the polarimeter instrument (see Table of Materials) and check the orientation of the chamber.
Set 0 as click zero clear in the 'control' section.
Measure the specific rotation of CHCl₃ for the blank.
NOTE: Light source: Na; λ = 589 nm; D.I.T: 5 s; cycle times: 5; cycle interval: 5 s; temperature: 20 °C.
Measure the specific rotation of the sample solution at a constant temperature.
NOTE: Light source: Na; λ = 589 nm; D.I.T: 5 s; cycle times: 5; cycle interval: 5 s; temperature: 20 °C.
Measure the specific rotation of the sample solution three times in the same way to obtain the average value.
Calculate the specific rotation using the following equation²⁷:

α = observed rotation (degrees), c = concentration (g/mL), l = path length (10^-1 m).

9. ¹H and ¹³C NMR analysis

Prepare approximately 0.6-1.0 mL of the NMR solvent (CDCl₃).
Dissolve ~50 mg of sample in the solvent at a concentration of 0.02 M for ¹H NMR and 0.05 M for ¹³C NMR measurements.
Transfer the sample solution into an NMR tube using a Pasteur pipette.
Load the tube into the NMR instrument (see Table of Materials).
NOTE: NMR measurements were performed using 400 MHz or 500 MHz spectrometers. Spin number: 16 (¹H NMR), 256 or 512 (¹³C NMR); measurement time: 10 min (¹H NMR), 20 or 30 min (¹³C NMR)].
Record the NMR spectra and analyze the data.
NOTE: Reference the chemical shift of spectrum to CDCl₃ signal [δ (¹H NMR spectrum) = 7.26 ppm; δ (¹³C NMR spectrum) = 77.0 ppm)].

Representative Results

To investigate the achievability of preparing a contiguous bisaziridine, (E)-3-((S)-1-((R)-1-phenylethyl)aziridin-2-yl)acrylaldehyde (1a) was first synthesized as a model substrate according to the procedure mentioned in step 1 (Figure 1)²⁸.

Figure 1: Synthesis of 1a as a model substrate. Product 1a was synthesized from (R)-1-((R)-1-phenylethyl)aziridine-2-carbaldehyde using (triphenylphosphoranylidene)acetaldehyde as the reagent. This figure is adapted from Mao et al.²⁸ and Rhee et al.⁵². Please click here to view a larger version of this figure.

Thereafter, aziridination of 1a was performed to obtain contiguous bisaziridines (2a and 2b) under the following optimal reaction conditions²⁹^,³⁰^,³¹^,³²^,³³^,³⁴^,³⁵ (step 2 and Figure 2): a) For the synthesis of 2a: 1a (1.0 mmol), catalyst B_S (7 mol%), BocNHOTs as the nitrogen source (1.1 equivalent), NaOAc as the base (1.5 equivalent), EtOAc (0. 3 M) for 24 h at room temperature; b) For the synthesis of 2b: 1a (1.0 mmol), catalyst B_S (7 mol%), TsNHOTs as the nitrogen source (1.1 equivalent), NaOAc as the base (1.5 equivalent), THF (0. 3 M) for 7 h at room temperature.

Figure 2: Synthesis of contiguous bisaziridines (2a and 2b). Products 2a and 2b were synthesized from 1a in two steps, using B_S as the catalyst in the first step and BocNHOTs or TsNHOTs as the reagent in the second step. Please click here to view a larger version of this figure.

After the construction of enantioenriched bisaziridines bearing non-activated and activated aziridine moieties, various nitrogen-enriched molecules (5a–g) were prepared via regioselective ring-opening reactions with diverse nucleophiles. Representative examples of the ring-opening reactions of bisaziridines are summarized in Table 1.

Table 1: Regioselective ring-opening of bisaziridines with diverse nucleophiles. This table is adapted from Rhee et al.⁵². Please click here to download this Table.

In the presence of the Lewis acid ZnCl₂, the sulfur atom of 1-phenyl-5-mercaptotetrazole and in acidic media NH₄Cl, the amine of aniline attacks the less hindered C3 atom of the aziridines 3b and 4b to afford the corresponding products 5a and 5b, respectively³⁶^,³⁷^,³⁸^,³⁹^,⁴⁰^,⁴¹^,⁴² (Table 1, entries 1 and 2). Product 5c was synthesized when the nitrogen atom of N-methyleneamine equivalent⁴³, which was produced from 1,3,5-triethylhexahydro-1,3,5-triazine in the presence of ZnBr₂as a catalyst, attacks the non-activated aziridine over the unreacted activated aziridine 3b, followed by ring-closure reaction (Table 1, entry 3). Surprisingly, the regiochemical control in the ring-opening of the non-activated aziridines can be achieved by the selection of an appropriate N-protecting group such as Ts or Boc group on the activated aziridines (Table 1, entries 4 and 5). Presumably, the differential ring-opening pattern may be attributed to the geometry of the activation modes upon protonation (i.e., secondary interactions) (Figure 3). The secondary interaction between the nitrogen atom of the non-activated aziridine and the adjacent nitrogen atom of the sulfonamide at the C2' position may have occurred, creating a sterically congested chiral environment; the consequent nucleophilic attack of acetate on the less hindered C3 atom⁴⁴^,⁴⁵^,⁴⁶ would have led to the formation of the kinetic product 5d (Table 1, entry 4). On the other hand, the secondary interaction between the proton of the aziridinium ion and carbonyl oxygen may involve the construction of a more flexible and less sterically congested circumstance, leading to the formation of thermodynamic product 5e via the nucleophilic attack²⁰^,²¹^,²²^,²³^,²⁴^,²⁵^,²⁶ of acetate on the more substituted C2 atom (Table 1, entry 5). Notably, various nucleophiles, such as S, N, C, and O, favorably attacked the non-activated aziridine under mildly acidic conditions (Table 1, entries 1-5).

Figure 3: Plausible secondary interactions for the selective ring-opening reactions of contiguous bisaziridines. (A) The nucleophilic attack of acetate on the less hindered C3 atom would have resulted in the formation of kinetic products 5d. (B) The nucleophilic attack of acetate on the more substituted C2 atom would have resulted in the formation of thermodynamic product 5e. This figure is adapted from Rhee et al.⁵². Please click here to view a larger version of this figure.

The selective ring-opening reaction of N-Ts-protected aziridine can be accomplished with azide (N₃ˉ) to afford the desired product 5f, since azide provides access to the less hindered C3' atom⁴⁷^,⁴⁸^,⁴⁹ (Table 1, entry 6). Further, isoxazoline N-oxide 5g was synthesized via the formation of a β-hydroxy-α-nitro ester and the successive nucleophilic attack of the nitronate oxygen atom on the C3' atom of the activated aziridine ring, while the contiguous bisaziridinyl aldehyde was reacted with ethyl nitroacetate and imidazole⁵⁰ (Table 1, entry 7). Notably, preferential ring-opening reactions of the activated aziridine moieties occurred under basic conditions (Table 1, entries 6 and 7).

In the presence of Pd(OH)₂/C, H₂ (1 atm) and Boc₂O, the contiguous bisaziridinyl aldehyde was easily converted to the multi-substituted chiral pyrrolidine compound 5h via the following consecutive reactions⁵¹ (Table 1, entry 8 and Figure 4).

Figure 4: Schematic illustration for the synthesis of chiral pyrrolidine. This figure has been modified from Rhee et al.⁵². Please click here to view a larger version of this figure.

Characterization data for the products
Some important peaks in the ¹H NMR spectral data (Figure 5, Figure 6, Figure 7, Figure 8, Figure 9, Figure 10, and Figure 11) of the compounds are as follows. The peak of the aldehyde hydrogen appears at ≥9.00 ppm. The peaks of the alkene hydrogens appear in the range of 5.00-7.00 ppm. The peaks of the aziridine hydrogens appear at ≤3.50 ppm. In the case of bisaziridine, the hydrogens appear individually. Generally, the peaks of the hydrogens of the other alkyl groups appear at ≤3.00 ppm. In the case of Boc and TBS, the hydrogen peaks are generally stationary and appear as singlets at ≤2.00 ppm. In the case of the bisaziridine ring-opening compound, the hydrogen peaks of the alkyl group appear individually. All details of the products are provided in Supplementary File 1 (full NMR spectra, optical purity, and HRMS-MALDI data).

The remaining NMR spectral data of the products shown in Table 1 are included in Supplementary File 1 (5a-c, 5e, and 5g).

Figure 5: Spectral data for 1a: (A) ¹H NMR spectrum. (B) ¹³C NMR spectrum. Notable peaks in the ¹H NMR spectrum: The peaks at 6.56 and 6.38 ppm correspond to the alkene hydrogens in between the aziridine and the aldehyde. Moreover, the peak at 9.47 ppm corresponds to the aldehyde hydrogen. This figure is adapted from Mao et al.²⁸. Please click here to view a larger version of this figure.

Figure 6: Spectral data for 2a: (A) ¹H NMR spectrum. (B) ¹³C NMR spectrum. Notable peaks in the ¹H NMR spectrum: The peak at 9.16 ppm indicates that the aldehyde remains intact. The peak at 1.48 ppm corresponds to the Boc hydrogens. In comparison with the spectrum data of 1a, the peaks of alkene hydrogens have disappeared; however, the peaks of the generated aziridine hydrogens are detected in the range of 1.25-1.72 ppm. This figure is adapted from Rhee et al.⁵². Please click here to view a larger version of this figure.

Figure 7: Spectral data for 3a: (A) ¹H NMR spectrum. (B) ¹³C NMR spectrum. Notable peaks in the ¹H NMR spectrum: The peak at 1.42 ppm corresponds to the alcohol hydrogen in the ethyl alcohol adjacent to the aziridine, indicating that aldehyde in 2a was reduced to ethyl alcohol. Moreover, the peaks at 4.00 and 3.54 ppm represent the methylene hydrogens in ethyl alcohol. This figure is adapted from Rhee et al.⁵². Please click here to view a larger version of this figure.

Figure 8: Spectral data for 4a: (A) ¹H NMR spectrum. (B) ¹³C NMR spectrum. Notable peaks in the ¹H NMR spectrum: The peaks at 0.90 and 0.07 ppm correspond to the TBS hydrogens. This figure is adapted from Rhee et al.⁵². Please click here to view a larger version of this figure.

Figure 9: Spectral data for 5d: (A) ¹H NMR spectrum. (B) ¹³C NMR spectrum. Notable peaks in the ¹H NMR spectrum: The peak at 2.13 ppm corresponds to the methyl hydrogens of acetate. The peaks at 4.43 and 4.15 ppm correspond to the methylene hydrogens adjacent to acetate, formed after the aziridine ring-opening by acetic acid. Thus, the peaks at 2.13, 3.11, 4.15, and 4.43 ppm are direct evidence of the ring-opening reaction. This figure is adapted from Rhee et al.⁵². Please click here to view a larger version of this figure.

Figure 10: Spectral data for 5f: (A) ¹H NMR spectrum. (B) ¹³C NMR spectrum. Notable peaks in the ¹H NMR spectrum: The peak at 4.95 ppm corresponds to the amine proton. The peak at 3.72 ppm corresponds to the hydrogen attached to the carbon bonded to the azide. These peaks are direct evidence of the ring-opening of the aziridine bearing the -Ts group by N₃ˉ nucleophile. This figure is adapted from Rhee et al.⁵². Please click here to view a larger version of this figure.

Figure 11: Spectral data for 5h: (A) ¹H NMR spectrum. (B) ¹³C NMR spectrum. Notable peaks in the ¹H NMR spectrum: The peaks at 1.70, 1.99, 3.32, 3.45, and 3.65 ppm correspond to the hydrogens of pyrrolidine. The peak of the amine proton adjacent to the -Ts group overlaps with other phenyl groups at 7.30 ppm. These peaks demonstrate the ring-opening and hydrogenation of bisaziridine and the subsequent formation of new cyclic compounds. This figure is adapted from Rhee et al.⁵². Please click here to view a larger version of this figure.

Supplementary File 1: The structure, NMR spectra, optical purity, and HRMS-MALDI data of the synthetized prodcuts. Please click here to download this File.

Discussion

The formation of an inseparable mixture of diastereomers has occasionally been observed during the course of organocatalytic aziridination of chiral 3-[1-(1-phenylethyl)aziridin-2-yl)]acrylaldehyde, when N-Boc-O-tosyl or N-Ts-O-tosyl hydroxylamine was used as the nitrogen source. Further, the yield of contiguous bisaziridine product decreased when the amount of diaryl silyl ether prolinol as catalyst was increased from 7 mol% to 20 mol%⁴⁷^,⁴⁸^,⁴⁹. Moreover, we noticed the phenomena of "matched" and "mismatched" pairs between the chiral conformation of the substrate (specifically N-(1-phenylethyl)aziridine moiety) and chiral organocatalyst. However, the aforementioned problems can be solved by intensive investigation of vital parameters such as catalyst loading, solvent, nitrogen source, and the selection of a stereochemically configured N-(1-phenylethyl)aziridine moiety.

In this context, an approach that utilizes selective ring-opening of contiguous bisaziridines bearing non-activated and activated aziridine moieties with various nucleophiles to access chiral nitrogen-rich molecules under either acidic or basic conditions is the critical step.

To date, the common method for regioselective ring-opening of aziridine reported in the literature focuses on either non-activated aziridine or activated aziridine¹⁴^,¹⁷^,¹⁹^,²⁰^,²¹^,²⁵^,²⁶^,²⁷^,²⁸^,²⁹^,³⁰^,³¹^,³²^,³³^,³⁴^,³⁵^,³⁶^,³⁷^,³⁸^,³⁹^,⁴⁰^,⁴¹. However, in this study, we have described for the first time the rational design of a contiguous bisaziridine containing both activated and non-activated aziridines and subjected it to regio- and stereoselective ring-opening with diverse nucleophiles. The salient features of the current approach include: (a) the emergence of contiguous aziridines as small chiral building blocks which are of great interest owing to the wide applicability of their structural motifs; (b) controlling the regioselectivity for ring-opening reaction and stereoselective chemical transformations that can improve product yield and create a greener process; and (c) synthesis of diverse nitrogen-rich molecules using predictive modeling tools for selective ring openings.

The current protocol can be used to develop practical methods for the synthesis of nitrogen-enriched bioactive compounds and natural products.

Divulgazioni

The authors have nothing to disclose.

Acknowledgements

This research was supported by the Korea Basic Science Institute (National Research Facilities and Equipment Center) grant funded by the Ministry of Education (2022R1A6C101A751). This work was also supported by the National Research Foundation of Korea (NRF) grants (2020R1A2C1007102 and 2021R1A5A6002803).

Materials

(R)-(+)-α,α-Diphenyl-2-pyrrolidinemethanol trimethylsilyl ether	Sigma-Aldrich	677191	reagent
(R)-1-((R)-1-phenylethyl)aziridine-2-carbaldehyde	Imagene Co.,Ltd.		reagent
(S)-(–)-α,α-Diphenyl-2-pyrrolidinemethanol trimethylsilyl ether	Sigma-Aldrich	677183	reagent
(S)-2-(diphenyl((trim ethylsilyl)oxy)methyl)pyrrolidine	Sigma-Aldrich	677183	reagent
(Triphenylphosphoranylidene) acetaldehyde	Sigma-Aldrich	280933	reagent
1,2-Dichloroethane	Sigma-Aldrich	284505	solvent
AB Sciex 4800 Plus MALDI TOFTM (2,5-dihydroxybenzoic acid (DHB) matrix	Sciex		High resolution mass spectra
Acetic acid	Sigma-Aldrich	A6283	reagent
Ammonium chloride	Sigma-Aldrich	254134	reagent
aniline	Sigma-Aldrich	132934	reagent
Autopol III digital polarimeter	Rudolph Research Analytical		polarimeter
AVANCE III HD (400 MHz) spectrometer	Bruker		NMR spectrometer
Bruker Ascend 500 (500 MHz)	Bruker		NMR spectrometer
Celite 535	Sigma-Aldrich	22138	For Celite pad
Dichloromethane	Sigma-Aldrich	270997	solvent
Di-tert-butyl dicarbonate	Sigma-Aldrich	361941	reagent
Ethyl Acetate	Sigma-Aldrich	270989	solvent
Ethyl nitroacetate	Sigma-Aldrich	192333	reagent
Imidazole	Sigma-Aldrich	I2399	reagent
INOVA 400WB (400 MHz)	Varian		NMR spectrometer
JMS-700	JEOL		High resolution mass spectra
Methanol	Sigma-Aldrich	322415	solvent
N-Boc-O-tosylhydroxylamine	Sigma-Aldrich	775037	reagent
P-2000	JASCO		polarimeter
Palladium hydroxide on carbon	Sigma-Aldrich	212911	reagent
Phenyl-1H-tetrazole-5-thiol	TCI	P0640	reagent
Silica gel	Sigma-Aldrich	227196	For flash clromatography
Silica gel on TLC plates	Merck	60768	TLC plate
Sodium acetate	Sigma-Aldrich	S8750	reagent
Sodium azide	Sigma-Aldrich	S2002	reagent
Sodium borohydride	Sigma-Aldrich	452882	reagent
Sodium carbonate	Sigma-Aldrich	S2127	reagent
tert-Butyldimethylsilyl chloride	Sigma-Aldrich	190500	reagent
Tetrahydrofuran	Sigma-Aldrich	401757	solvent
Toluene	Sigma-Aldrich	244511	solvent
Zinc bromide	Sigma-Aldrich	230022	reagent
Zinc chloride	Sigma-Aldrich	429430	reagent

Riferimenti

Anastas, P. T., Warner, J. C. Principles of green chemistry. Green Chemistry: Theory and Practice. 29, (1998).
Sheldon, R. A., Arends, I. W. C. E., Hanefeld, U. . Green Chemistry and Catalysis. , (2007).
Trost, B. M. The atom economy-a search for synthetic efficiency. Science. 254 (5037), 1471-1477 (1991).
Sheldon, R. A. The E factor: fifteen years on. Green Chemistry. 9 (12), 1273-1283 (2007).
Li, C. J., Trost, B. M. Green chemistry for chemical synthesis. Proceedings of the National Academy of Sciences. 105 (36), 13197-13202 (2008).
Sheldon, R. A. Fundamentals of green chemistry: efficiency in reaction design. Chemical Society Reviews. 41 (4), 1437-1451 (2012).
Marion, P., et al. Sustainable chemistry: how to produce better and more from less. Green Chemistry. 19 (21), 4973-4989 (2017).
Sheldon, R. A. The E factor 25 years on: the rise of green chemistry and sustainability. Green Chemistry. 19 (1), 18-43 (2017).
Dembitsky, V. M., Terent’ev, A. O., Levitsky, D. O. Aziridine alkaloids: origin, chemistry and activity. Natural Products. , 977-1006 (2013).
Ham, G. E. Activated aziridines. I. Reaction of anilines with O-ethyl-N,N-ethyleneurethane. mechanism and Hammett ρ-constant. Journal of Organic Chemistry. 29 (10), 3052-3055 (1964).
Tanner, D. Chiral aziridine-their synthesis and use in stereoselective transformations. Angewandte Chemie International Edition. 33 (6), 599-619 (1994).
Atkinson, R. S. 3-Acetoxyaminoquinazolinones (QNHOAc) as aziridinating agents: ring-opening of N-(Q)-substituted aziridines. Tetrahedron. 55 (6), 1519-1559 (1999).
Sweeney, J. B. Aziridines: epoxides’ ugly cousins. Chemical Society Reviews. 31 (5), 247-258 (2002).
Lu, P. Recent developments in regioselective ring opening of aziridines. Tetrahedron. 14 (66), 2549-2560 (2010).
Ohno, H. Synthesis and applications of vinylaziridines and ethynylaziridines. Chemical Reviews. 114 (16), 7784-7814 (2014).
Callebaut, G., Meiresonne, T., De Kimpe, N., Mangelinckx, S. Synthesis and reactivity of 2-(carboxymethyl) aziridine derivatives. Chemical Reviews. 114 (16), 7954-8015 (2014).
Ghosal, N. C., et al. Organocatalysis by an aprotic imidazolium zwitterion: Regioselective ring-opening of aziridines and applicable to gram scale synthesis. Green Chemistry. 18 (2), 565-574 (2016).
Rai, V. K., Rai, P. K., Bajaj, S., Kumar, A. An unprecedented synthesis of γ-lactams via mercaptoacetylation of aziridines in water. Green Chemistry. 13 (5), 1217-1223 (2011).
Srivastava, V. P., Yadav, L. D. S. The first example of ring expansion of N-tosylaziridines to 2-aroyl-N-tosylazetidines with nitrogen ylides in an aqueous medium. Green Chemistry. 12 (8), 1460-1465 (2010).
Stanković, S., et al. Regioselectivity in the ring opening of non-activated aziridines. Chemical Society Reviews. 41 (2), 643-665 (2012).
Ha, H. J., Jung, J. H., Lee, W. K. Application of regio-and stereoselective functional group transformations of chiral aziridine-2-carboxylates. Asian Journal of Organic Chemistry. 3 (10), 1020-1035 (2014).
D’hooghe, M., Ha, H. -. J. . Synthesis of 4- to 7-membered Heterocycles by Ring Expansion: Aza-, Oxa- and Thiaheterocyclic Small-Ring Systems. 1st ed. , (2016).
Macha, L., Ha, H. -. J. Total synthesis and absolute stereochemical assignment of microgrewiapine A and its stereoisomers. Journal of Organic Chemistry. 84 (1), 94-103 (2019).
Srivastava, N., Macha, L., Ha, H. -. J. Total synthesis and stereochemical revision of biemamides B and D. Organic Letters. 21 (22), 8992-8996 (2019).
Lee, W. K., Ha, H. -. J. Highlights of the chemistry of enantiomerically pure aziridine-2-carboxylates. Aldrichimica Acta. 36 (2), 57-63 (2003).
Głowacka, I. E., Trocha, A., Wróblewski, A. E., Piotrowska, D. G. N-(1-Phenylethyl) aziridine-2-carboxylate esters in the synthesis of biologically relevant compounds. Beilstein Journal of Organic Chemistry. 15 (1), 1722-1757 (2019).
JoVE. Organic Chemistry II. Polarimeter. JoVE Science Education Database. , (2022).
Mao, H., et al. Preparation of chiral contiguous epoxyaziridines and their regioselective ring-opening for drug syntheses. Chemistry-A European Journal. 24 (10), 2370-2374 (2018).
Vesely, J., Ibrahem, I., Zhao, G. L., Rios, R., Córdova, A. Organocatalytic enantioselective aziridination of α,β-unsaturated aldehydes. Angewandte Chemie International Edition. 11 (46), 778-781 (2007).
Arai, H., et al. Enantioselective aziridination reaction of α,β-unsaturated aldehydes using an organocatalyst and tert-butyl N-arenesulfonyloxycarbamates. Tetrahedron Letters. 50 (26), 3329-3332 (2009).
Desmarchelier, A., et al. Organocatalyzed aziridination of α-branched enals: enantioselective synthesis of aziridines with a quaternary stereocenter. European Journal of Organic Chemistry. 20 (2011), 4046-4052 (2011).
Jiang, H., Halskov, K. S., Johansen, T. K., Jørgensen, K. A. Deracemization of axially chiral α,β-unsaturated aldehydes through an amino-catalyzed symmetry-making-symmetry-breaking cascade. Chemistry-A European Journal. 17 (14), 3842-3846 (2011).
Deiana, L., et al. Catalytic asymmetric aziridination of α,β-unsaturated aldehydes. Chemistry-A European Journal. 17 (28), 7904-7917 (2011).
Molnár, I. G., Tanzer, E. M., Daniliuc, C., Gilmour, R. Enantioselective aziridination of cyclic enals facilitated by the fluorine-iminium Ion gauche effect. Chemistry-A European Journal. 20 (3), 794-800 (2014).
Nemoto, T., et al. Enantioselective synthesis of (R)-Sumanirole using organocatalytic asymmetric aziridination of an α,β-unsaturated aldehyde. Tetrahedron: Asymmetry. 25 (15), 1133-1137 (2014).
Sim, T. B., et al. A novel synthesis of 5-functionalized oxazolidin-2-ones from enantiomerically pure 2-substituted N-[(R)-(+)-α-methylbenzyl] aziridines. Journal of Organic Chemistry. 68 (1), 104-108 (2003).
Silva, M. A., Goodman, J. M. Aziridinium ring opening: a simple ionic reaction pathway with sequential transition states. Tetrahedron Letters. 46 (12), 2067-2069 (2005).
Yun, S. Y., et al. Nucleophile-dependent regioselective ring opening of 2-substituted N,N-dibenzylaziridinium ions: bromide versus hydride. Chemical Communications. (18), 2508-2510 (2009).
Dolfen, J., et al. Bicyclic aziridinium ions in azaheterocyclic chemistry-preparation and synthetic application of 1-azoniabicyclo [n. 1.0] alkanes. Advanced Synthesis & Catalysis. 358 (22), 3485-3511 (2016).
D’hooghe, M., et al. Systematic study of halide-induced ring opening of 2-substituted aziridinium salts and theoretical rationalization of the reaction pathways. European Journal of Organic Chemistry. 2010 (25), 4920-4931 (2010).
Boydas, E. B., et al. Theoretical insight into the regioselective ring-expansions of bicyclic aziridinium ions. Organic & Biomolecular Chemistry. 16 (5), 796-806 (2018).
Lee, B. K., et al. An efficient synthesis of chiral terminal 1, 2-diamines using an enantiomerically pure [1-(1′ R)-methylbenzyl] aziridine-2-yl] methanol. Tetrahedron. 62 (35), 8393-8397 (2006).
Ha, H. J., et al. Addition of 1-Boc-2-tert-butyldimethylsilyloxypyrrole to N-methyleneamine equivalents: synthesis of 1-Boc-5-aminomehtyl-2,5-dihydropyrrole-2-ones and 1-Boc-2-oxo-1,7,9-triazaspiro[4,5]-dec-3-ene. Heterocycles. 50 (1), 203-214 (1999).
Laughlin, R. G. The basicity of aliphatic sulfonamides. Journal of the American Chemical Society. 89 (17), 4268-4271 (1967).
Moreira, J. A., Rosa da Costa, A. M., García-Río, L., Pessêgo, M. Equilibrium constants and protonation site for N-methylbenzenesulfonamides. Beilstein Journal of Organic Chemistry. 7 (1), 1732-1738 (2011).
Song, K., et al. Highly active ruthenium metathesis catalysts enabling ring-opening metathesis polymerization of cyclopentadiene at low temperatures. Nature Communications. 10, 3860 (2019).
Fukuta, Y., et al. De novo synthesis of Tamiflu via a catalytic asymmetric ring-opening of meso-aziridines with TMSN3. Journal of the American Chemical Society. 128 (19), 6312-6313 (2006).
Jiang, H., et al. Intramolecular radical aziridination of allylic sulfamoyl azides by cobalt (II)-based metalloradical catalysis: effective construction of strained heterobicyclic structures. Angewandte Chemie International Edition. 55 (38), 11604-11608 (2016).
Righi, G., Bovicelli, P., Barontini, M., Tirotta, I. Dimethyl carbonate in the regio-and stereocontrolled opening of three-membered heterocyclic rings. Green Chemistry. 14 (2), 495-502 (2012).
Righi, P., et al. Solution- and solid-phase synthesis of 4-hydroxy-4,5-dihydroisoxazole derivatives from enantiomerically pure N-tosyl-2,3-aziridine alcohols. Organic Letters. 4 (4), 497-500 (2002).
Yadav, N. N., Choi, J., Ha, H. -. J. One-pot multiple reactions: asymmetric synthesis of 2, 6-cis-disubstituted piperidine alkaloids from chiral aziridine. Organic & Biomolecular Chemistry. 14 (27), 6426-6434 (2016).
Rhee, H. J., et al. Preparation and utilization of contiguous bisaziridines as chiral building blocks. Advanced Synthesis & Catalysis. 363 (13), 3250-3257 (2021).

Play Video

PDF

DOI

DOWNLOAD MATERIALS LIST

Citazione di questo articolo

Lee, Y., Byeon, H., Ha, H., Yang, J. W. Preparation of Contiguous Bisaziridines for Regioselective Ring-Opening Reactions. J. Vis. Exp. (185), e64019, doi:10.3791/64019 (2022).