Tobacco plants were used to produce a fungal cellulase, TrCel5A, via a transient expression system. The expression could be monitored using a fluorescent fusion protein, and the protein activity was characterized post-expression.
Cellulose degrading enzymes, cellulases, are targets of both research and industrial interests. The preponderance of these enzymes in difficult-to-culture organisms, such as hyphae-building fungi and anaerobic bacteria, has hastened the use of recombinant technologies in this field. Plant expression methods are a desirable system for large-scale production of enzymes and other industrially useful proteins. Herein, methods for the transient expression of a fungal endoglucanase, Trichoderma reesei Cel5A, in Nicotiana tabacum are demonstrated. Successful protein expression is shown, monitored by fluorescence using an mCherry-enzyme fusion protein. Additionally, a set of basic tests are used to examine the activity of transiently expressed T. reesei Cel5A, including SDS-PAGE, Western blotting, zymography, as well as fluorescence and dye-based substrate degradation assays. The system described here can be used to produce an active cellulase in a short time period, so as to assess the potential for further production in plants through constitutive or inducible expression systems.
Degradation of lignocellulosic biomass and its conversion into liquid fuel has been envisioned as a method to reduce reliance on fossil fuels. One significant hurdle in establishing economically feasible biomass processing systems is in the enzymatic degradation of cellulose and hemicellulose1. Plant expression systems show great potential for the production of enzymes on an industrial scale. Agricultural systems to harvest plants economically and in volume are already established, as they have been for thousands of years. The production of cellulases in plants is desirable due to factors like the ease of autohydrolysis2, and the potential for maximizing the use of lower enzyme levels by increasing the digestibility of plant cell walls1. Finally, plant systems allow the targeting of recombinant proteins to specific areas of plant cells and are able to posttranslationally modify enzymes where required3.
Nicotiana tabacum (tobacco) is very commonly used as a model organism for heterologous protein expression studies in plants, due to its rapid growth and biomass accumulation features4. Transient expression of recombinant proteins is a technique which enables protein production in short time periods5, while maintaining flexibility as to the localization and thus posttranslational modifications of the selected proteins, i.e. cellulases. This enables the production of the cellulase(s) for basic analysis, while also laying the groundwork for further expression strategies in plants. Using such a transient expression strategy, an endoglucanase from glycosyl hydrolase family 5, Cel5A, derived from the fungal host Trichoderma reesei (Hypocrea jecorina)6 is produced (hereafter referred to as TrCel5A). TrCel5A is a 42 kDa protein which is natively glycosylated and is highly active in hydroylzing cellulose chains7.
The transient expression technique described here is based on a relatively commonly used system, infiltrating the plant leaves with Agrobacteria carrying the gene of interest in an appropriate expression vector. To allow for rapid analysis of successful in planta expression, TrCel5A can also be expressed as a fusion protein with mCherry, a monomeric fluorescent protein originally derived from Discosoma sp. protein DsRed8, with an additional six Histidine residues (His-tag) fused to the C-terminus (TrCel5A-mCherry). Expression of the heterologous fusion protein, TrCel5A-mCherry, can thus be monitored within the growing plant by using green light to examine mCherry dispersal. If desired, thin sections of the plant material can be examined under green light microscopically to establish the specific localization of the protein. For this work, signal and transit peptides were incorporated in the construct, to localize the heterologous protein export to the endoplasmic reticulum9.
To analyze the activity of plant expressed cellulases, including TrCel5A, a number of cellulase activity tests can be run. After the extraction of the total soluble plant proteins, TrCel5A can be partially purified using a thermal incubation technique. Protein size is established using SDS-PAGE followed by Western blotting. Zymography can be used to analyze activity against substrates, e.g. cellulose which has been carboxy-methylated (making carboxymethyl cellulose: CMC) for solubility10. Cellulase and glucosidase activity can be monitored using the fluorophore 4-methylumbelliferyl (4-MU) associated with β-D-cellobioside (combined: 4-MUC). Another method to assess endoglucanase activity involves the spectrometric analysis of CMC which has been associated with an azo-dye (Remazolbrilliant Blue R)11. In addition, protein activity of both endoglucanases and a range of cellulases can be monitored by the use of a sugar analysis test, such as the p-hydroxy benzoic acid hydrazide (PAHBAH) assay12. These techniques can be used to elucidate and quantify the activity of the expressed cellulase of interest.
1. Growth of Wild Type N. tabacum Plants
2. Transient Expression of TrCel5A and TrCel5A-mCherry Proteins
3. Assessment of TrCel5A-mCherry Expression in Plant Leaves
4. TrCel5A Extraction from Tobacco Leaves
5. SDS-PAGE, Western Blotting, and Azo-CMC Zymography of TrCel5A-mCherry
6. 4-MUC Activity Assay of TrCel5A
7. Azo-carboxymethyl Cellulose Activity Assay of TrCel5A
8. PAHBAH Assay of TrCel5A
TrCel5A and TrCel5A-mCherry were expressed successfully in tobacco plants using the transient expression system (Figures 1A and 1B). Examination of the expression pattern of the TrCel5A-mCherry fusion protein revealed healthy leaves (Figure 1C), which showed widespread protein expression under green light (Figure 1D).
Extraction of the total soluble proteins was performed on tobacco plants which had leaves that contained the transiently expressed TrCel5A protein and SDS-PAGE showed a large variety of proteins were present (Figure 2A, lane 1). The total soluble protein sample from TrCel5A expressing plants and a total soluble protein sample derived from NTEPs, were incubated for 10 min at 55 °C. TrCel5A remains stable and active at 55 °C while many other (native tobacco) proteins are not stable at this temperature. Thus, many non-essential proteins were precipitated by this treatment, leaving a partially purified sample of TrCel5A. After this thermal-precipitation step, a strong protein band was observed at ~40 kDa (Figure 2A, lane 1). This is likely to be the catalytic domain (CD) of the TrCel5A, which has been shown previously to run at this size when expressed in plants4. The negative and positive control samples (Figure 2A, lanes 3 and 4, respectively) showed low concentrations of remaining thermo-tolerant tobacco proteins from NTEPs (negative control, Figure 2A, lane 3) and multiple bands indicating a mixture of T. reesei proteins (positive control, Figure 2A, lane 4).
The size of the TrCel5A was confirmed by antibody staining directed at the His-6tag incorporated into the TrCel5A C-terminus, which was seen to be absent for both controls (Figure 2B). The TrCel5A was demonstrated to retain endoglucanase activity by CMC zymography (Figure 2C, lanes 1 and 2), where the refolded protein created a strong cleared area, indicating CMC degradation, at the same height as in the Coomassie stained SDS-PAGE gel and the Western blot. No activity was observed for the non-cellulase protein mixtures from NTEPs (Figure 2C, lane 3), and the mixture of T. reesei proteins run as a positive control showed endoglucanase activity from multiple components (Figure 2C, lane 4).
To quantify the cellulolytic activity of TrCel5A three assays were used. Firstly, the degradation of 4-MUC was analyzed by observing the increased fluorescence emission at 465 nm (excited at 360 nm) of the released 4-MU. TrCel5A was shown to degrade 4MUC, as did a 1:1,000 dilution of a commercially available mixture of T. reesei cellulases (Figure 3A).
A quantifiable analysis of the activity of TrCel5A against CMC was done by measuring the release of an Azo-dye at 590 nm from Azo-CMC. TrCel5A activity under these conditions, was equivalent in activity to a 1:1,000 dilution of the cellulase mixture mentioned above (Figure 3B).
The ability of TrCel5A to degrade filter paper was also analyzed. For this assay, an initial saccharification assay was performed (i.e. with the TrCel5A solution degrading the filter paper) and then the supernatant was analyzed by the PAHBAH assay to ascertain the quantity of reducing sugars released (Figure 3B).
Figure 1. Plant expression cassettes for TrCel5A constructs and heterologous expression of TrCel5A-mCherry in tobacco leaves visualized by fluorescence under green light. Schematic representations of the plant expression cassette used for TrCel5A (A) and TrCel5A-mCherry (B) are shown. After transient TrCel5A-mC expression, tobacco leaves were examined under normal (C) or green light (D). For panels (A) and (B) the CaMV promoter (P35SS) and terminator signal (pA35S) are indicated in light blue. 5'-UTR of chalcone synthase (CHS), and the His6 coding sequence (His6) are indicated in blue. The plant codon-optimized leader peptide (LPH) derived from the heavy chain of the murine mAb24 is depicted in green. LPH achieves the secretion of the recombinant protein to the apoplast, after which a C-terminal KDEL signal, indicated in red, retards the protein to the ER. Arrows label the binding site for primer to amplify the CaMV 35SS expression cassette. For panels (C) and (D) the green light had an excitation 515 nm. Images were taken without magnification.
Figure 2. Size and activity of TrCel5A shown by SDS-PAGE, Western blotting, and CMC zymography. Separation of the total soluble proteins: from tobacco plants where TrCel5A was transiently expressed before (1) and after (2) thermal precipitation purification; from tobacco plants where TrCel5A was not present, also after thermal precipitation (3); or of a commercially available mixture of T. reesei cellulases (4). SDS-PAGE separated proteins are visualized with Coomassie Blue staining (A), Western blotting against the His-tag region of TrCel5A (B), and the cellulase activity shown by zymography using CMC visualized using Congo Red (C). PageRuler Plus (Fermentas) was used as the molecular weight marker (M).
Figure 3. Enzyme activity quantification of TrCel5A. TrCel5A was incubated with 4-MUC (A), Azo-CMC (B), and filter paper (C) and the substrate degradation measured by release of the fluorophore 4-MU (A), an Azo-dye (B), or by quantifying reducing sugars by monitoring the color change of PAHBAH (C). Each assay shows the results for three replicates. Error bars indicate standard deviation. In all three assays the samples analyzed were buffer alone, TrCel5A after thermal precipitation purification, NTEP (WT Nt) after thermal precipitation purification, and a commercially available mixture of T. reesei cellulases.
Recombinant expression of cellulases is a field of great interest, due to the desire for more efficient biofuel production systems1. Plants offer many possibilities for successful cellulase production, with features such as economic harvesting techniques and autohydrolysis methods being very desirable properties for large-scale biofuel production. Further, the use of different localizations for producing proteins allow, if required, posttranslational modifications20. Altering plants to enable constitutive expression of cellulases, while offering obvious benefits, is a time consuming method which may or may not be successful. Techniques such as sequestration of the expressed proteins and inducible expression mechanisms increase the likelihood of successful cellulase production in plants, however these still take many months to establish. Here, transient expression methods are demonstrated, to illustrate the potential for a specific cellulase to be produced through plant systems within a matter of days.
A fusion with the fluorescent protein mCherry was used here to demonstrate the success of the transient protein expression methods. TrCel5A-mCherry was clearly distributed across the majority of leaves which had been infiltrated with the vector-containing Agrobacteria. Localization to the endoplasmic reticulum enables posttranslational modifications of the expressed protein. The ability of an expression system to enable e.g. glycosylation is particularly important for those cellulases which are originally derived from fungal organisms, like T. reesei 21. Yeast expression systems, which are increasingly popular for heterologous cellulase expression, frequently result in hyper-glycosylation of the enzymes, which is debated to be a potential hindrance to full cellulase activity22. Plant glycosylation mechanisms are without the drawback of hyper-glycosylation. Additionally, expression in plant systems allows for localization to areas which allow or do not allow posttranslational modifications, thus enabling tailoring to the source of the protein. The system demonstrated here can also be used, by the application of different signal sequences14, for localization to the apoplast, chloroplast, cytosol or golgi vesicles. The use of fluorescent protein fusions, such as TrCel5A-mCherry, can demonstrate the success of protein expression as well as the localization of the protein. However, such conjugates are not required for further activity tests. Thus it is recommended that a non-mCherry TrCel5A construct be used for all further tests, as was shown here, to obtain more accurate activity data of the expressed cellulase. Regarding controls for further experiments, samples from non-transiently infiltrated plants are commonly viewed to be adequate controls.
Characterization of the expressed protein, TrCel5A, by SDS-PAGE and Western blotting revealed a band at approximately 40kDa, indicating that the protein linker region had been cleaved and that the major product derived was a peptide containing the catalytic domain. This is in line with previous findings of TrCel5A protein expression in plants5. Zymography analysis of activity against CMC indicated that the remaining peptide was active as an endoglucanase. While SDS-PAGE and Western blotting are extremely common assays, CMC zymography is a much more specific test for cellulase (and in particular endoglucanase) activity. Some important factors to keep in mind for successful zymography results are a) that the substrate (in this case CMC) must be completely solubilized and spread evenly throughout the gel; b) that the protein needs to be successfully refolded, preferably in a short period to limit the amount of protein diffusion through the gel; and c) that the activity assay should be at the optimal temperature for the enzyme being assayed (for TrCel5A between 50 and 60 °C) and should be brief to enable sharper bands of degradation.
Quantitative analysis of the cellulase activity of expressed TrCel5A demonstrated that the enzyme was active against a range of substrates, including 4-MUC, CMC and filter paper. Each of the substrates was examined using a different spectroscopic test, either via a fluorophore (4-MU) or by light scatter analysis of a color reaction (Azo-dye or PAHBAH). All three substrates and assays are widely used for the assessment of cellulase activity, and are relatively straight forward assays. 4-MUC is used as a basic substrate to determine glycosyl hydrolase activity, as a wide variety of these enzymes (endoglucanases, exoglucanases and β-glucosidases) are active against it. The speed of the assay, limited number of requirements, high sensitivity and ability of many cellulases to cleave the substrate, makes this a useful assay for general screening for cellulases, or for probing the success of an expression run. One point to keep in mind when using 4-MUC is that this substrate is particularly suited to the activity of β-glucosidases, making the activity of endoglucanases (such as TrCel5A) or exoglucanases appear weak in comparison to β-glucosidases or enzyme mixtures which contain β-glucosidases. When performing a 4-MUC assay with low protein concentrations or otherwise low activity levels it is recommended to utilize the addition of glycine (pH 10) as a stop solution, as the pH alteration enhances the fluorescence of 4-MU. CMC is a more specific substrate for the enzyme expressed here, as it is only degraded by endoglucanases. The Azo-CMC assay is more complicated than the one for 4-MUC, due to the need for precipitation of the cellulose (and methanol) by zinc. The major benefit of this substrate, and thus assay, is that it is specific for endoglucanase activity, making it very useful for establishing the nature of the cellulase being produced. Filter paper degradation is another common test for establishing cellulase activity. The amount of degradation observed varies significantly dependent upon the properties of the cellulase being assessed, and it is a preferred substrate for examining the activity of enzyme mixtures. The PAHBAH assay, used here to examine filter paper degradation, recognizes the amount of sugars released after saccharification and so is also applicable to a wide range of model substrates not demonstrated here, including CMC, lichenan, β-glucan, α-cellulose, AVICEL, xylan and xyloglucan. For this assay, care should be taken to include standards on the same plate (or in the same run) as the samples being assessed, as variation in incubation times can lead to differences in the results. It is thus also important to repeat the assay to ensure accuracy. Additionally, a sample control should always be run, where the sample is incubated without the cellulose substrate, to control for any reducing sugars naturally present in the samples which might be identified by the PAHBAH, and would otherwise give false positive results.
In conclusion, methods for the transient expression and characterization of a recombinant cellulase are clearly demonstrated. These techniques provide a straightforward way to generate sufficient amounts of protein for further examination of one or more cellulases, using activity tests like those demonstrated here. In particular, these methods provide a swift way to examine the potential of designated cellulases for in planta production.
The authors have nothing to disclose.
This work was supported by the BMBF Forschungsinitiative “BioEnergie 2021 – Forschung für die Nutzung von Biomasse” and the Cluster of Excellence “Tailor-made Fuels from Biomass”, which is funded through the Excellence Initiative by the German federal and state governments to promote science and research at German universities.
4-methylumbelliferyl β-D-cellobioside | SIGMA-ALDRICH | M6018 | |
Acetic acid | ROTH | 3738 | |
Acetosyringon (concentrated) | ROTH | 6003 | |
Antibiotic – kanamycin | ROTH | T832 | |
Antibiotic – rifampicin | ROTH | 4163 | |
Antibiotic – carbenicillin | ROTH | 6344 | |
Antibody – rabbit anti His(6) pAb | ROCKLAND | 600-401-382 | |
Antibody – goat anti rabbit AP, FC pAb | DIANOVA | 111-055-008 | |
Azo-carboxymethyl cellulose | MEGAZYME | S-ACMC | |
β-cyclodextrin | SIGMA-ALDRICH | C4805 | |
Calcium chloride dihydrate | SIGMA-ALDRICH | C5080 | |
Carboxymethyl cellulose | ROTH | 3333.1 | |
Cellulase from Trichoderma reesei ATCC 26921 | SIGMA-ALDRICH | C2730 | |
Congo red | SIGMA-ALDRICH | 75768 | |
Coomasie brilliant blue G 250 | ROTH | 9598.2 | |
D(+)-glucose | ROTH | 8337 | |
Ethanol | ROTH | K928 | |
Filter paper – Rotilabo blotting paper | ROTH | CL67 | |
NBT/BCIP | SIGMA-ALDRICH | 72091 | |
MES buffer | ROTH | 4256 | |
Methanol | ROTH | 8388 | |
Sodium citrate | ROTH | 3580 | |
Sodium dodecylsulfate | SERVA | 20765 | |
Sodium hydroxide | ROTH | 6771 | |
Soil, Einheitserde classic | PATZER GMBH | ||
Spectrometer – Infinite M200 | TECAN | ||
Sucrose | SIGMA-ALDRICH | S-5390 | |
4-Hydroxy benzhydrazide | SIGMA-ALDRICH | H9882 | |
Phosphate buffered saline | ROTH | 1058 | |
UV light source – BLAK RAY | UVP | ||
Vibratome – VT1000S | Leica |