JOVE JOURNAL

Ingegneria

Showing 553 - 564 in 666 videos.

Preparation and Reactivity of Gasless Nanostructured Energetic Materials

Khachatur V. Manukyan¹, Christopher E. Shuck², Alexander S. Rogachev³, Alexander S. Mukasyan²

¹Department of Physics,University of Notre Dame, ²Department of Chemical and Biomolecular Engineering,University of Notre Dame, ³Center of Functional Nano-Ceramics,National University of Science and Technology, "MISIS"

Journal (Engineering)

Surface Enhanced Raman Spectroscopy Detection of Biomolecules Using EBL Fabricated Nanostructured Substrates

Robert F. Peters^1,2, Luis Gutierrez-Rivera^1,2, Steven K. Dew^1,2, Maria Stepanova^1,2

¹Department of Electrical and Computer Engineering,University of Alberta, ²National Institute for Nanotechnology,National Research Council of Canada

Journal (Engineering)

Laser-induced Forward Transfer for Flip-chip Packaging of Single Dies

Kamal S. Kaur¹, Geert Van Steenberge¹

¹Center for Microsystems Technology (CMST),Ghent University-imec

Journal (Engineering)

Investigating Single Molecule Adhesion by Atomic Force Spectroscopy

Frank W. S. Stetter^1,2, Sandra Kienle^1,2, Stefanie Krysiak^1,2, Thorsten Hugel^1,2

¹Physik-Department E22a,Technische Universität München, ²IMETUM,Technische Universität München

Journal (Engineering)

Reservoir Condition Pore-scale Imaging of Multiple Fluid Phases Using X-ray Microtomography

Matthew Andrew¹, Branko Bijeljic¹, Martin Blunt¹

¹Department of Earth Science and Engineering,Imperial College London

Journal (Engineering)

Preparation and Friction Force Microscopy Measurements of Immiscible, Opposing Polymer Brushes

Sissi de Beer^1,2, Edit Kutnyanszky², Martin H. Müser^1,3, G. Julius Vancso²

¹Jülich Supercomputing Centre,Forschungszentrum Jülich, ²Materials Science and Technology of Polymer, MESA+ Institute for Nanotechnology,University of Twente, ³Department of Materials Science and Engineering,Universität des Saarlandes

Journal (Engineering)

Novel 3D/VR Interactive Environment for MD Simulations, Visualization and Analysis

Benjamin N. Doblack¹, Tim Allis¹, Lilian P. Dávila¹

¹Materials Science and Engineering, School of Engineering,University of California Merced

Journal (Engineering)

A Testing Platform for Durability Studies of Polymers and Fiber-reinforced Polymer Composites under Concurrent Hygrothermo-mechanical Stimuli

Antonio Gomez¹, Robert Pires¹, Alyssa Yambao¹, Valeria La Saponara¹

¹Department of Mechanical and Aerospace Engineering,University of California, Davis

Journal (Engineering)

Patterning via Optical Saturable Transitions – Fabrication and Characterization

Precious Cantu¹, Trisha L. Andrew², Rajesh Menon¹

¹Department of Electrical and Computer Engineering,The University of Utah, ²Department of Chemistry,The University of Wisconsin-Madison

Journal (Engineering)

Casting Protocols for the Production of Open Cell Aluminum Foams by the Replication Technique and the Effect on Porosity

Erardo M. Elizondo Luna¹, Farzad Barari², Robert Woolley², Russell Goodall¹

¹Department of Materials Science and Engineering,The University of Sheffield, ²Department of Mechanical Engineering,The University of Sheffield

Journal (Engineering)

Convergent Polishing: A Simple, Rapid, Full Aperture Polishing Process of High Quality Optical Flats & Spheres

Tayyab Suratwala¹, Rusty Steele¹, Michael Feit¹, Rebecca Dylla-Spears¹, Richard Desjardin¹, Dan Mason¹, Lana Wong¹, Paul Geraghty¹, Phil Miller¹, Nan Shen¹

¹Lasers, Optics, & Targets for the National Ignition Facility,Lawrence Livermore National Laboratory

Journal (Engineering)

Mechanical Expansion of Steel Tubing as a Solution to Leaky Wellbores

Mileva Radonjic¹, Darko Kupresan¹

¹Craft and Hawkins Department of Petroleum Engineering,Louisiana State University

1…46 47 48 49 50 51…56