Journal
/
Ingénierie
/
3D Printing – Evaluating Particle Emissions of a 3D Printing Pen
Journal JoVE
Ingénierie
This content is Free Access.
Journal JoVE Ingénierie
3D Printing – Evaluating Particle Emissions of a 3D Printing Pen

3D Printing – Evaluating Particle Emissions of a 3D Printing Pen

7,988 Views

•

06:44 min

•

October 09, 2020

DOI:

10.3791/61829-v

DOI:
10.3791/61829-v

•

06:44 min
October 09, 2020

•

7 Views
, , , , ,
1Department of Chemical and Product Safety,German Federal Institute for Risk Assessment (BfR), 2Department of Biological Safety,German Federal Institute for Risk Assessment (BfR)

Summary

Automatically generated

This protocol presents a method to analyze the emission of 3D printing pens. Particle concentration and particle size distribution of the released particle is measured. Released particles are further analyzed with transmission electron microscopy (TEM). Metal content in filaments is quantified by inductively coupled plasma mass spectrometry (ICP-MS).

Explore More Videos

3D Printing3D PenParticle EmissionsAerosol EmissionsAir QualityCharacterizationSMPSCPCHEPA FilterParticle Size DistributionBreathing ZoneEmission MeasurementAir InletDesiccatorFilamentTemperaturePrinting Process

Read Article

Cite this Article

Sigloch, H., Bierkandt, F. S., Singh, A. V., Gadicherla, A. K., Laux, P., Luch, A. 3D Printing - Evaluating Particle Emissions of a 3D Printing Pen. J. Vis. Exp. (164), e61829, doi:10.3791/61829 (2020).

Download .ris file

Copy

Share Video

.

Copy