Journal
/
Ingénierie
/
Predicting Catalyst Extrudate Breakage Based on the Modulus of Rupture
Journal JoVE
Ingénierie
This content is Free Access.
Journal JoVE Ingénierie
Predicting Catalyst Extrudate Breakage Based on the Modulus of Rupture

Predicting Catalyst Extrudate Breakage Based on the Modulus of Rupture

DOI:
10.3791/57163-v

•

09:53 min

•

May 13, 2018

•

, , , ,
1Process Technology Department, Catalyst Technology Division,ExxonMobil Research and Engineering Company

Chapitres

  • 00:04Titre
  • 01:02Bending Strength Measurements
  • 03:14Aspect Ratio Measurements
  • 04:26Catalyst Collision (Drop) Test
  • 05:54Bulk Crush Testing
  • 07:42Results: Analysis of Catalyst Extrudate Breakage Data
  • 09:01Conclusion

Summary

Traduction automatique

Traduction automatique

Here we present a protocol to measure the modulus of rupture of an extruded catalyst and the breakage of said catalyst extrudates by collision against a surface or by compression in a fixed bed.

Tags

Catalyst ExtrudateModulus Of RuptureBending StrengthBreakageCollisionStressFixed BedRupture ForceExtrudate ResilienceBending Test FrameAnvil SpeedSupport SpanMaximum ForceBuchner FunnelNitrogen Gas BlanketRupture Force Reading

Article

Embed

AJOUTER À LA PLAYLIST

Usage Statistics

Vidéos Connexes

Microwave Photonics Systems Based on Whispering-gallery-mode Resonators

Selective Area Modification of Silicon Surface Wettability by Pulsed UV Laser Irradiation in Liquid Environment

Simulation of Human-induced Vibrations Based on the Characterized In-field Pedestrian Behavior

Strain Sensing Based on Multiscale Composite Materials Reinforced with Graphene Nanoplatelets

Effect of Bending on the Electrical Characteristics of Flexible Organic Single Crystal-based Field-effect Transistors

The Modular Design and Production of an Intelligent Robot Based on a Closed-Loop Control Strategy

Fabrication of Flexible Image Sensor Based on Lateral NIPIN Phototransistors

O-cresol Concentration Online Measurement Based On Near Infrared Spectroscopy Via Partial Least Square Regression

Implementation of a Nonlinear Microscope Based on Stimulated Raman Scattering

In Situ Transmission Electron Microscopy with Biasing and Fabrication of Asymmetric Crossbars Based on Mixed-Phased a-VOx

Read Article