Journal
/
Ingeniería
/
Ion-Exchange Membranes for the Fabrication of Reverse Electrodialysis Device
JoVE Revista
Ingeniería
Se requiere una suscripción a JoVE para ver este contenido.  Inicie sesión o comience su prueba gratuita.
JoVE Revista Ingeniería
Ion-Exchange Membranes for the Fabrication of Reverse Electrodialysis Device

Ion-Exchange Membranes for the Fabrication of Reverse Electrodialysis Device

DOI:
10.3791/62309-v

•

07:55 min

•

July 20, 2021

•

, ,
1Department of Mechanical Engineering,Energy Engineering Lab, Sogang University

Capítulos

  • 00:04Introduction
  • 01:07Cation Exchange Membrane (CEM) Preparation
  • 02:53Anion Exchange Membrane (AEM) Preparation
  • 04:01Reverse Electrodialysis (RED) Fabrication
  • 05:02RED Measurement
  • 06:20Results: RED Stack Power Density Measurement
  • 07:14Conclusion

Summary

Traducción Automática

Traducción Automática

We demonstrate the fabrication of a reverse electrodialysis device using a cation-exchange membrane (CEM) and anion-exchange membrane (AEM) for power generation.

Tags

Ion-exchange MembranesReverse ElectrodialysisEnergy GenerationSalinity GradientElectrochemical DevicesCation Exchange MembranePolyetheretherketoneDimethylacetamidePTFE FilterSulfuric AcidFAA-3 IonomerNMP SolventMembrane FabricationDevice Performance

Article

Embed

Añadir a la lista de reproducción

Usage Statistics

Videos relacionados

Fabrication of VB2/Air Cells for Electrochemical Testing

Fabrication of Uniform Nanoscale Cavities via Silicon Direct Wafer Bonding

Patterning via Optical Saturable Transitions – Fabrication and Characterization

Scanning Light Scattering Profiler (SLPS) Based Methodology to Quantitatively Evaluate Forward and Backward Light Scattering from Intraocular Lenses

Preparation of Large-area Vertical 2D Crystal Hetero-structures Through the Sulfurization of Transition Metal Films for Device Fabrication

Fabrication of Magnetic Nanostructures on Silicon Nitride Membranes for Magnetic Vortex Studies Using Transmission Microscopy Techniques

Fabrication of an Optical Cell Dryer for the Spectroscopic Analysis Cells

Hybrid Printing for the Fabrication of Smart Sensors

Fabrication of Nanoheight Channels Incorporating Surface Acoustic Wave Actuation via Lithium Niobate for Acoustic Nanofluidics

Microfluidic Acoustophoresis for Flowthrough Separation of Gram-Negative Bacteria using Aptamer Affinity Beads

Read Article