Journal
/
Ingeniería
/
Fabrication of Three-Dimensional Graphene-Based Polyhedrons via Origami-Like Self-Folding
JoVE Revista
Ingeniería
Author Produced
Se requiere una suscripción a JoVE para ver este contenido.  Inicie sesión o comience su prueba gratuita.
JoVE Revista Ingeniería
Fabrication of Three-Dimensional Graphene-Based Polyhedrons via Origami-Like Self-Folding

Fabrication of Three-Dimensional Graphene-Based Polyhedrons via Origami-Like Self-Folding

DOI:
10.3791/58500-v

•

14:52 min

•

September 23, 2018

•

, , , ,
1Department of Electrical and Computer Engineering,University of Minnesota, Minneapolis, United States

Capítulos

  • 00:00Título
  • 02:11Preparation of Al2O3/Cr Protection Layers on a Cu Sacrificial Layer
  • 04:04Preparation of Multilayer CVD Graphene Membranes
  • 07:23Preparation of Graphene Oxide Membranes
  • 09:08Metal Surface Patterning on Graphene-based Membranes
  • 09:23Fabrication of Polymer Frames and Hinges
  • 10:58Self-folding in DI Water
  • 11:41Removal of the Protection Layers
  • 11:57Representative Results
  • 13:52Conclusion

Summary

Traducción Automática

Traducción Automática

Here, we present a protocol for fabrication of 3D graphene-based polyhedrons via origami-like self-folding.

Tags

3D GrapheneGraphene PolyhedronsOrigami-like Self-folding2D Graphene3D MicrocubesGraphene Membrane TransferMetal Surface PatterningPolymer FramesHingesSelf-foldingProtection LayersElectron Beam EvaporationPhotolithography

Article

Embed

Añadir a la lista de reproducción

Usage Statistics

Videos relacionados

High-resolution, High-speed, Three-dimensional Video Imaging with Digital Fringe Projection Techniques

Process of Making Three-dimensional Microstructures using Vaporization of a Sacrificial Component

Fabrication of Spatially Confined Complex Oxides

Fabrication of Uniform Nanoscale Cavities via Silicon Direct Wafer Bonding

Fabrication and Testing of Microfluidic Optomechanical Oscillators

Patterning via Optical Saturable Transitions – Fabrication and Characterization

Atomically Traceable Nanostructure Fabrication

Using Synchrotron Radiation Microtomography to Investigate Multi-scale Three-dimensional Microelectronic Packages

Three-dimensional Particle Tracking Velocimetry for Turbulence Applications: Case of a Jet Flow

Fabrication and Characterization of Superconducting Resonators

Read Article