Journal
/
Ingeniería
/
An Available Technique for Preparation of New Cast MnCuNiFeZnAl Alloy with Superior Damping Capacity and High Service Temperature
JoVE Revista
Ingeniería
Author Produced
Se requiere una suscripción a JoVE para ver este contenido.  Inicie sesión o comience su prueba gratuita.
JoVE Revista Ingeniería
An Available Technique for Preparation of New Cast MnCuNiFeZnAl Alloy with Superior Damping Capacity and High Service Temperature

An Available Technique for Preparation of New Cast MnCuNiFeZnAl Alloy with Superior Damping Capacity and High Service Temperature

DOI:
10.3791/57180-v

•

14:51 min

•

September 23, 2018

•

, , , , ,
1School of Manufacturing Science and Engineering,Sichuan University, 2Department of Mechanical Engineering,Hong Kong Polytechnic University, 3Department of Mechanical and Electrical Engineering,Chengdu Aeronautic Polytechnic

Capítulos

  • 00:00Título
  • 01:31Introduction
  • 05:01The Protocol for Alloy Preparation and Test
  • 10:32Representative Results
  • 13:47Conclusion

Summary

Traducción Automática

Traducción Automática

Here we present a protocol to obtain a novel Mn-Cu-based alloy with excellent comprehensive performances by a high-quality smelting technology and reasonable heat treatment methods.

Tags

Cast MnCuNiFeZnAl AlloyDamping CapacityHigh Service TemperatureVacuum Induction MeltingSand Mold CastingHeat TreatmentMicrostructureManganese-copper Based AlloysFace-centered Cubic To Face-centered Tetragonal Phase TransformationAging TreatmentNanoscale Precipitates

Article

Embed

Añadir a la lista de reproducción

Usage Statistics

Videos relacionados

Synthesis and Microdiffraction at Extreme Pressures and Temperatures

Fiber Optic Distributed Sensors for High-resolution Temperature Field Mapping

Applying X-ray Imaging Crystal Spectroscopy for Use as a High Temperature Plasma Diagnostic

Adsorption Device Based on a Langatate Crystal Microbalance for High Temperature High Pressure Gas Adsorption in Zeolite H-ZSM-5

Synthesis of Ionic Liquid Based Electrolytes, Assembly of Li-ion Batteries, and Measurements of Performance at High Temperature

Experimental Procedure for Warm Spinning of Cast Aluminum Components

High Temperature Fabrication of Nanostructured Yttria-Stabilized-Zirconia (YSZ) Scaffolds by In Situ Carbon Templating Xerogels

Preparation and High-temperature Anti-adhesion Behavior of a Slippery Surface on Stainless Steel

Method for Recording Broadband High Resolution Emission Spectra of Laboratory Lightning Arcs

Magnet Assisted Composite Manufacturing: A Flexible New Technique for Achieving High Consolidation Pressure in Vacuum Bag/Lay-Up Processes

Read Article