Journal
/
Ingeniería
/
A Cost-effective and Reliable Method to Predict Mechanical Stress in Single-use and Standard Pumps
JoVE Revista
Ingeniería
This content is Free Access.
JoVE Revista Ingeniería
A Cost-effective and Reliable Method to Predict Mechanical Stress in Single-use and Standard Pumps

A Cost-effective and Reliable Method to Predict Mechanical Stress in Single-use and Standard Pumps

DOI:
10.3791/53052-v

•

07:34 min

•

August 05, 2015

•

, , , , , ,
1Institute of Biotechnology, School of Life Sciences and Facility Management,Zurich University of Applied Sciences, 2Levitronix Ltd., 3SOPAT Ltd., 4Institute of Chemical and Process Engineering,Technische Universität Berlin

Capítulos

  • 00:05Título
  • 01:00Preparations
  • 02:45Taking Sheerline Measurements
  • 04:19Data Analysis
  • 05:46Results: Mechanical Stress Estimates for Various Pumps
  • 07:11Conclusion

Summary

Traducción Automática

Traducción Automática

Shear stress investigations on an oil-water emulsion system result in drop breakup over the experimental time. To count drop sizes in pumping processes, the suitability of inline endoscopy was successfully demonstrated in this protocol.

Tags

Mechanical StressSingle-use PumpsStandard PumpsBiopharmaceutical ProductionBiotechnological ProductionShear ForceProduct LossOil-water EmulsionDrop Size DetectionInline EndoscopySauter Mean DiameterLiquid/liquid Dispersions

Article

Embed

Añadir a la lista de reproducción

Usage Statistics

Videos relacionados

A Method to Fabricate Disconnected Silver Nanostructures in 3D

Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics

Mechanical Expansion of Steel Tubing as a Solution to Leaky Wellbores

A Robotic Platform to Study the Foreflipper of the California Sea Lion

Ice Generation and the Heat and Mass Transfer Phenomena of Introducing Water to a Cold Bath of Brine

Plasmonic Trapping and Release of Nanoparticles in a Monitoring Environment

Experimental Implementation of a New Composite Fabrication Method: Exposing Bare Fibers on the Composite Surface by the Soft Layer Method

Measurements of Waves in a Wind-wave Tank Under Steady and Time-varying Wind Forcing

Measurements of Local Instantaneous Convective Heat Transfer in a Pipe – Single and Two-phase Flow

Three-electrode Coin Cell Preparation and Electrodeposition Analytics for Lithium-ion Batteries

Read Article