Here, we present protocols for the preparation of acute brain slices containing the lateral geniculate nucleus and the electrophysiological investigation of retinogeniculate and corticogeniculate synapses function. This protocol provides an efficient way to study synapses with the high-release and low-release probability in the same acute brain slices.
The lateral geniculate nucleus is the first relay station for the visual information. Relay neurons of this thalamic nucleus integrate input from retinal ganglion cells and project it to the visual cortex. In addition, relay neurons receive top-down excitation from the cortex. The two main excitatory inputs to the relay neurons differ in several aspects. Each relay neuron receives input from only a few retinogeniculate synapses, which are large terminals with many release sites. This is reflected by the comparably strong excitation, the relay neurons receive, from retinal ganglion cells. Corticogeniculate synapses, in contrast, are simpler with few release sites and weaker synaptic strength. The two synapses also differ in their synaptic short-term plasticity. Retinogeniculate synapses have a high release probability and consequently display a short-term depression. In contrast, corticogeniculate synapses have a low release probability. Corticogeniculate fibers traverse the reticular thalamic nuclei before entering the lateral geniculate nucleus. The different locations of the reticular thalamic nucleus (rostrally from the lateral geniculate nucleus) and optic tract (ventro-laterally from the lateral geniculate nucleus) allow stimulating corticogeniculate or retinogeniculate synapses separately with extracellular stimulation electrodes. This makes the lateral geniculate nucleus an ideal brain area where two excitatory synapses with very different properties impinging onto the same cell type, can be studied simultaneously. Here, we describe a method to investigate the recording from relay neurons and to perform detailed analysis of the retinogeniculate and corticogeniculate synapse function in acute brain slices. The article contains a step-by-step protocol for the generation of acute brain slices of the lateral geniculate nucleus and steps for recording activity from relay neurons by stimulating the optic tract and corticogeniculate fibers separately.
Relay neurons of the lateral geniculate nucleus integrate and relay visual information to the visual cortex. These neurons receive excitatory input from ganglion cells via retinogeniculate synapses, which provide the main excitatory drive for relay neurons. In addition, relay neurons receive excitatory inputs from cortical neurons via corticogeniculate synapses. Moreover, relay neurons receive inhibitory inputs from local interneurons and GABAergic neurons of the nucleus reticularis thalami1. The nucleus reticularis thalami is present like a shield between thalamus and cortex such that fibers projecting from cortex to thalamus and in the opposite direction must go through the nucleus reticularis thalami2.
Retinogeniculate inputs and corticogeniculate inputs display distinct synaptic properties3,4,5,6,7,8. Retinogeniculate inputs form large terminals with multiple release sites9,10. In contrast, corticogeniculate inputs display small terminals with single release sites7. In addition, retinogeniculate synapses efficiently drive action potentials of relay neurons despite constituting only 5−10% of all synapses on relay neurons3,8,11. Corticogeniculate synapses, on the other hand, serve as a modulator of retinogeniculate transmissions by controlling the membrane potential of relay neurons12,13.
These two main excitatory inputs to relay neurons are also functionally different. One prominent difference is the short-term depression of retinogeniculate synapses and the short-term facilitation of corticogeniculate synapses3,5,8. Short-term plasticity refers to a phenomenon in which synaptic strength changes when the synapse is repeatedly active within a time period of few milliseconds to several seconds. Synaptic release probability is an important factor underlying short-term plasticity. Synapses, with a low initial release probability, display short-term facilitation due to the buildup of Ca2+ in the presynapse and consequently an increase in the release probability is observed upon repeated activity. In contrast, synapses with high release probability usually display short-term depression due to the depletion of ready-releasable vesicles14. In addition, desensitization of postsynaptic receptors contributes to the short-term plasticity in some high-release probability synapses8,15. High release probability and desensitization of α-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid (AMPA) receptors contribute to the prominent short-term depression of retinogeniculate synapses. In contrast, low-release probability underlies the short-term facilitation of corticogeniculate synapses.
In mice, the optic tract enters the dorsal lateral geniculate nucleus (dLGN) from the caudolateral site, whereas corticogeniculate fibers enter the dLGN rostroventrally. The distance between the two inputs allows for the investigation of the individual properties of two very different excitatory inputs impinging onto the same cell. Here, we build on and improve a previously described dissection method in which retinogeniculate and corticogeniculate fibers are preserved in acute brain slices3. We, then, describe the electrophysiological investigation of relay neurons and stimulation of retinogeniculate and corticogeniculate fibers with extracellular stimulation electrodes. Finally, we provide a protocol for the filling of relay neurons with biocytin and subsequent anatomical analysis.
All the experiments were approved by the Governmental Supervisory Panel on Animal Experiments of Rhineland-Palatinate.
1. Solutions
2. Dissection
3. Electrophysiology
4. Biocytin labeling
5. Cellular imaging and reconstruction
The slice preparation of dLGN containing the retinogeniculate and corticogeniculate pathways is shown under a 4x objective (Figure 2). Axons of retinal ganglion cells bundle together in the optic tract (Figure 2). The stimulating pipette was placed on the optic tract to induce retinogeniculate synapse-mediated current (Figure 2A) and on nucleus reticularis thalami to induce corticogeniculate synapses-mediated current (Figure 2B), respectively. Of note, axons from cortical neurons to LGN neurons projects from the cortex to thalamus traverse the nucleus reticularis thalami. Corticogenicluate synapses can, therefore, be activated by stimulation in the nucleus reticularis thalami.
The paired-pulse ratio of AMPA receptor-mediated EPSCs is below 1 when stimulating the optic tract with 30 ms inter-stimulus interval, but above 1 when stimulating corticogeniculate fibers with the same inter-stimulus interval (Figure 2C,D). The paired-pulse depression of retinogeniculate synapses is due to a high vesicle release probability and desensitization of postsynaptic AMPA receptors. The paired-pulse facilitation of corticogeniculate synapses is consistent with a low vesicle release probability16.
Figure 3A shows IR-DIC image showing the soma of a dLGN relay neuron along with the tip of the patch pipette. Biocytin staining enables us to gain a view of the recorded neuron. Different from interneurons, which have bipolar morphology, relay neurons have multipolar dendritic arbors (Figure 3B) containing more than 3 primary dendrites8,17. Three-dimensional (3D) reconstruction of a biocytin-labeled relay neuron was then generated which shows a radially symmetric dendritic architecture (Figure 3C).
Figure 1: Schemes representing the dissection protocol. (A) Horizontal view of the mouse skull, showing the position of the initial cuts. The first cut was performed along with the sagittal suture, followed by another two cuts along with the coronal suture and lambdoid suture, respectively. Dashed lines represent the incisions. (B) Sagittal view of the whole brain. Dashed lines indicate that the cerebrum is isolated from the olfactory bulb and midbrain. (C-D) These panels show the first cutting angle to separate the two hemispheres from horizontal (C) and coronal (D) view, respectively. (E) Coronal view of one hemisphere on the cutting stage. Dashed lines indicate the slicing direction. l, m, d, and v represent the lateral, medial, dorsal and ventral aspects, respectively, for the hemisphere in panels D and E. (F) Diagram of the dissection chamber with two hemispheres on the cutting stage. The dashed arrow indicates the moving direction of the cutting blade. a, p, and d represent the anterior, posterior, and dorsal aspects of the left hemisphere, respectively. (G) Scheme representing a properly cut slice with a relatively large part of the dLGN and intact preservation of the optic tract. dLGN, dorsal lateral geniculate nucleus; vLGN, ventral lateral nucleus; OT, olfactory bulb; NRT, nucleus reticularis thalami. Panels C, D and G have been modified from Figure 1 of Turner and Salt3. Please click here to view a larger version of this figure.
Figure 2: Slice preparation of dLGN containing the retinogeniculate and corticogeniculate pathways and example recordings. (A-B) These panels show a dLGN slice with preservation of retinogeniculate and corticogeniculate inputs. The stimulation electrode was placed on the optic tract to activate retinogeniculate synapses (A) and on the nucleus reticularis thalami to activate corticogeniculate synapses (B). (C) AMPA receptor-mediated EPSCs in response to stimulation of the optic tract twice with 30 ms inter-stimulus interval. (D) Corticogeniculate synapse-mediated currents with 30 ms inter-stimulus interval. The stimulation artifacts were removed for clarity. Please click here to view a larger version of this figure.
Figure 3: Morphological analysis of a relay neuron. (A) IR-DIC image showing the soma of a dLGN relay neuron with the tip of the patch pipette. (B) Confocal image of a relay neuron labeled with biocytin and visualized with streptavidin-Alexa 568. (C) Three-dimensional (3D) reconstruction of the same neuron, showing a radially symmetric dendritic architecture. Please click here to view a larger version of this figure.
We describe an improved protocol based on a previously published method3, which allows for the investigation of the high probability of release retinogeniculate synapses and low probability of release corticogeniculate synapses from the same slice. This is of great importance since these two inputs interact with each other to modulate the visual signal transmission: retinogeniculate inputs are the main excitatory drive of relay neurons, whereas corticothalamic inputs function as a modulator, which influences the gain of retinogeniculate transmission by affecting the state of relay neurons. As expected, we observed that retinogeniculate and corticogeniculate synapses display different short-term plasticity due to the difference in their release probabilities. Additionally, AMPA receptor desensitization also contributes to the strong depression in retinogeniculate synapses9,15,16. We have recently shown that short-term depression is modulated by CKAMP4416, an AMPA receptor auxiliary protein of the CKAMP family that slows the recovery from desensitization of AMPA receptors18,19,20. Furthermore, retinogeniculate synapse-mediated current amplitudes are higher than those of corticogeniculate synapse-mediated currents under the same stimulating strength, consistent with the large retinogeniculate synapses with multiple releasing sites, and relatively small corticogeniculate synapses7,21.
The slicing protocol is essentially the same as the one developed by Turner and Salt3. Some modifications that were based on our experience improved slice quality. Similar to Hauser et al.22, we used a choline-based instead of a sucrose-based dissection solution. Recovery after dissection was done at 34 °C in the cutting solution for 30 min and then in the recording solution for another 30 min and not at room temperature. Slices were slightly thinner (250 µm instead of 400 µm). We dissected brains using a wedge with an angle of 10−25°, which facilitates and increases the reliability of the slicing procedure.
Recording and stimulation conditions for the investigation of relay neuron synapse function are essentially the same as previously described by Chen and Regehr8. Activation of optic tract fibers usually elicits large currents and can be in the range of several nA when all retinogeniculate synapses on one relay neurons are activated23. To prevent series resistance errors, especially when investigating the maximal current by activating all retinogeniculate synapses on one relay neurons, Chen and Regehr used recording low resistance pipettes (<2 MΩ). However, to investigate synaptic short-term plasticity, it suffices to activate one or few retinal ganglion cell axons, which elicits currents that are in the range of 34−579 pA (unpublished results, Chen et al.). Smaller pipettes with a resistance between 3−4 MΩ can, therefore, be used when investigating retinogeniculate synapse function using weak stimulation of the optic tract. Activation of corticogeniculate synapses elicits relatively small currents16. Series resistance errors are, therefore, a smaller problem when investigating corticogeniculate synapse function.
We here show that stimulation of retinogeniculate and corticogeniculate synapses can be used to investigate short-term plasticity of AMPA receptor-mediated currents. The same protocol can be applied to record NMDA receptor-mediated current24. In fact, one of the first indications that AMPA receptor desensitization contributes to the short-term plasticity in retinogeniculate synapses came from experiments in which paired-pulse ratios of AMPA receptor-mediated currents were compared with paired-pulse ratios of NMDA receptor-mediated currents. Corticogeniculate synapses were stimulated by positioning the stimulation pipette in the nucleus reticularis thalami because axons of cortical neurons that excite dLGN relay neurons travel across this thalamic nucleus. The same stimulation position can be used to study inhibitory synaptic currents in the dLGN as shown for example by Govindaiah and Cox25.
Relay neurons express GABAA and GABAB receptors. The release of GABA activates synaptic GABAA receptors. GABAB receptors, which are extrasynaptically localized, are activated when nucleus reticularis thalami are strongly activated for example during burst firing26,27,28. Spillover of GABA, which is usually restricted due to GABA uptake by astrocytes, can activate during intense synapse activation the extrasynaptic GABAB receptors27,28. We did not block GABAB receptors because stimulation intensity and frequency were comparably low. However, when investigating corticogeniculate synapse function using intense stimulation protocols it might be preferable to add GABAB receptors.
Recordings of dLGN relay neurons can readily be performed when using slices that are approximately 2 mm medial from the lateral surface of the brain (start collecting approximately the 8th of the 250 µm slices during the cutting procedure). In some slices, not both inputs to a given relay neuron can be detected because one of the two pathways are severed close to the relay neuron. In this case, it is usually still possible to investigate retinogeniculate and corticogeniculate synapses in the same slice by selecting different relay neurons for each input. To record retinogeniculate synapse mediated current, ventrally located relay neurons are selected since the optic tract fibers to these cells are more likely preserved than in the dorsally located relay neurons. In contrast, corticogeniculate inputs are more likely preserved onto relay neurons that are located dorsally in the dLGN.
Slice quality determines the reliability of the data. Based on our experience, the following parameters are essential to ensure good slice quality. Cooling and oxygenation are important factors during the dissection procedure. The head of the mouse must be kept in cold solution immediately after the decapitation of the mouse. When taking the brain out of the skull, it should be immersed in ice-cold solution every 3 to 4 s in order to reduce cell death. Similarly, the slicing procedure should be performed at around 4 °C. Moreover, dissection solution and recording solution must be oxygenated at least 15 min before use to maintain sufficient oxygen concentration. In addition, blocking sodium channels can efficiently reduce the neuron activity. Therefore, a dissection solution containing 37.5 mmol choline was used.
Relay neurons display low-threshold spikes, which are generated by the transient Ca2+ current29. To block voltage gated Ca2+-channels, we added D-600 (methoxyverapamil) to the intracellular solution. D-600 should not be used if the purpose of the study is to investigate low-threshold spikes in relay neurons. The precision of whole-cell voltage clamp recordings is affected by space clamp errors. This technical problem is more relevant for inputs that are far away from the recording electrode (thus for distal synapses)30,31. To minimize the impact of the space clamp error, we used a Cs+-based instead of a K+-based intracellular solution. Channels that are K+ permeable (e.g., leak channels) are usually Cs+ impermeable32. Thus, the use of a Cs+-based intracellular solution increases the impedance of the cell.
Stable patch clamp recording depends on the selection of healthy cells. Neurons with round soma shape, dark color or swollen soma should be avoided. Furthermore, relay neurons are distinguished from the local interneurons by their larger soma size and more elaborate primary dendritic arbors. Therefore, we selected cells that have bigger soma size (bigger than 15 µm in diameter) and non-bipolar morphology. The example cell shown in Figure 3B has a symmetrical dendritic architecture and can, therefore, be classified as relay neuron resembling Y-neurons that are for example found in the cat LGN17.
Series resistance should be as small as possible and maintained constant. Moreover, since the inputs from two directions are preserved in one slice, it is important to get rid of the interference between the two inputs. To avoid activating corticogeniculate fibers when recording retinogeniculate synapse-mediated currents or vice versa, the stimulating pipette should not be placed into the dLGN and the distance between stimulating and recording pipette should be as far as possible. In addition, the long distance between stimulating and recording pipettes requires relatively intact axon preservation. Therefore, a proper cutting angle must be selected for the dissection. In general, only one or two slices with preservation of two inputs can be obtained from each hemisphere.
The authors have nothing to disclose.
This work has been funded by the German Research Foundation (DFG) within the Collaborative Research Center (SFB) 1134 "Functional Ensembles" (J.v.E. and X.C.) and the Research Grant EN948/1-2 (J.v.E.).
Amplifier | HEKA Elektronik | EPC 10 USB Double patch clamp amplifier | |
Biocytin | Sigma-Aldrich | B4261-250MG | |
CaCl2 | EMSURE | 1.02382.1000 | |
choline chloride | Sigma-Aldrich | C1879-1KG | |
Confocal Laser Scanning Microscope | Leica Microsystems | TCS SP5 | |
CsCl | EMSURE | 1.02038.0100 | |
Cs-gluconate | Self-prepared | Since there was no commercial Cs-gluconate, we prepared it by ourselves | |
D-600 | Sigma-Aldrich | M5644-50MG | methoxyverapamil hydrochloride |
D-APV | Biotrend | BN0085-100 | NMDA-receptor antagonist |
Digital camera for microscope | Olympus | XM10 | |
EGTA | SERVA | 11290.02 | |
Forene | Abbvie | 2594.00.00 | isoflurane |
Glucose | Sigma-Aldrich | 49159-1KG | |
HEPES | ROTH | 9105.2 | |
High Current Stimulus Isolator | World Precision Instruments | A385 | |
KCl | EMSURE | 1.04936.1000 | |
MgCl2 | EMSURE | 1.05833.0250 | |
Micromanipulators | Luigs & Neumann | SM7 | |
Miroscope | Olympus | BX51 | |
mounting medium | ThermoFisher Scientific | P36930 | Prolong Gold Invitrogen |
NaCl | ROTH | 3957.1 | |
NaH2PO4 | EMSURE | 1.06346.1000 | |
NaHCO3 | EMSURE | 1.06329.1000 | |
Pipette | Hilgenberg | 1807502 | |
Puller | Sutter | P-1000 | |
razor blade | Personna | 60-0138 | |
Semiautomatic Vibratome | Leica Biosystems | VT1200S | |
SR 95531 hydrobromide | Biotrend | AOB5680-10 | GABAA-receptor antagonist |