12.2:

Frost Resistant Concrete

JoVE Central
Civil Engineering
Se requiere una suscripción a JoVE para ver este contenido.  Inicie sesión o comience su prueba gratuita.
JoVE Central Civil Engineering
Frost Resistant Concrete

6 Views

01:29 min

November 07, 2024

Concrete's susceptibility to frost damage during freeze-thaw cycles demands strategic measures to enhance its frost resistance. Employing techniques like air entrainment, adjusting the water-cement ratio, proper curing, and selecting appropriate aggregates are essential.

Introducing microscopic air bubbles into the concrete mix through air entrainment creates small voids that accommodate ice expansion, thereby reducing internal pressures and preventing cracking. The optimal amount of entrained air usually ranges from 4% to 7% of the concrete volume and varies based on environmental exposure and aggregate size.

The water-cement ratio significantly influences frost resistance. A lower ratio results in denser concrete with fewer capillaries, which limits water absorption and subsequent freezing. However, maintaining a balance to ensure workability and strength is crucial, with typical ratios ranging from 0.40 to 0.45 in environments prone to freeze-thaw cycles.

Proper concrete curing is essential for promoting hydration, enhancing strength, and reducing porosity, thereby minimizing water penetration that could lead to freeze-related damage. Curing conditions typically last between 3 to 7 days.

Choosing aggregates with low absorption and high freeze-thaw durability is vital for maintaining the structural integrity of concrete. Laboratory tests that simulate rapid freeze-thaw cycles are crucial for assessing concrete's frost resistance. These tests measure changes in the dynamic modulus of elasticity and calculate a durability factor, ensuring the concrete's longevity and reliability in cold climates.