8.3:

Three-Phase Voltages

JoVE Central
Electrical Engineering
Se requiere una suscripción a JoVE para ver este contenido.  Inicie sesión o comience su prueba gratuita.
JoVE Central Electrical Engineering
Three-Phase Voltages

23 Views

01:30 min

July 08, 2024

A three-phase generator produces three voltages that are equal in magnitude but have a phase difference of 120 degrees. This identical magnitude and equal phase separated voltages are known as the balanced voltages and help to minimize power loss while ensuring a steady delivery of energy to connected loads. As voltage sources in a three-phase system can be configured in a wye or a delta formation, the loads connected to these systems can also be arranged in either configuration. This flexibility in load configuration is not just a design choice but a way to exert control over the system. Delta-connected loads have one end of each phase winding connected to a common neutral point. Conversely, in delta-connected loads, the ends of the phase windings are connected in a continuous loop, forming a triangle. A three-phase system uses four- and three-wire systems through star and delta connections. Three-phase voltages in wye configuration are:

Equation 1

Equation 2

Equation 3

Understanding the logical sequence of the three phases is key. When in the positive and a-b-c sequences, the phasors rotate anticlockwise, with Van leading Vbn, followed by Vcn. This sequence, resulting from the rotor rotating counterclockwise, is a clear and orderly progression.

In the negative sequence a-c-b, the phasors rotate clockwise, with Van leading Vcn and Vbn following last. This indicates a reversed-phase order compared to the positive sequence, which corresponds to clockwise rotor rotation.

Each configuration, whether wye-connected or delta-connected, allows for a balanced load condition and influences the circuit's distribution and management of voltages and currents. During the balanced load configurations, the impedances connected across each phase are equal in magnitude and phase, giving the power to manage your system effectively.

The star-connected loads can be transformed into delta configuration and vice versa. Based on the connection types of the source and load, the system can be configured in four main ways: wye-wye, wye-delta, delta-wye, and delta-delta.