Journal
/
Ingenieurwesen
/
Method Development for Contactless Resonant Cavity Dielectric Spectroscopic Studies of Cellulosic Paper
JoVE Journal
Ingenieurwesen
Zum Anzeigen dieser Inhalte ist ein JoVE-Abonnement erforderlich.  Melden Sie sich an oder starten Sie Ihre kostenlose Testversion.
JoVE Journal Ingenieurwesen
Method Development for Contactless Resonant Cavity Dielectric Spectroscopic Studies of Cellulosic Paper

Method Development for Contactless Resonant Cavity Dielectric Spectroscopic Studies of Cellulosic Paper

DOI:
10.3791/59991-v

•

05:40 min

•

October 04, 2019

•

, , , ,
1Testing and Technical Services, Plant Operations,United States Government Publishing Office, 2Materials Measurement Laboratory,National Institute of Standards and Technology, 3Nanoscale Device Characterization Division, Physical Measurement Laboratory,National Institute of Standards and Technology, 4College of Pharmacy,University of South Florida

Kapitel

  • 00:05Titel
  • 00:28Setup of Materials
  • 01:39Setup of Equipment and Taking Resonant Cavity Measurements
  • 03:25Contactless Resonant Cavity Dielectric Spectroscopic Analyses of Cellulosic Paper
  • 05:04Conclusion

Summary

Automatische Übersetzung

Automatische Übersetzung

A protocol for the non-destructive analysis of the fiber content and relative age of paper.

Tags

PaperCellulosicResonant CavityDielectric SpectroscopyFiber AnalysisContactlessNondestructiveThickness MeasurementMachine DirectionCross DirectionAccelerated AgingQuality FactorResonant FrequencySample HolderWaveguide

Article

Embed

ZUR WIEDERGABELISTE HINZUFÜGEN

Usage Statistics

Verwandte Videos

Construction and Characterization of External Cavity Diode Lasers for Atomic Physics

Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators

The Preparation of Electrohydrodynamic Bridges from Polar Dielectric Liquids

Fabrication Process of Silicone-based Dielectric Elastomer Actuators

Characterization of Full Set Material Constants and Their Temperature Dependence for Piezoelectric Materials Using Resonant Ultrasound Spectroscopy

Emission Spectroscopic Boundary Layer Investigation during Ablative Material Testing in Plasmatron

Optical Trap Loading of Dielectric Microparticles In Air

Fabrication of 1-D Photonic Crystal Cavity on a Nanofiber Using Femtosecond Laser-induced Ablation

Dielectric RheoSANS — Simultaneous Interrogation of Impedance, Rheology and Small Angle Neutron Scattering of Complex Fluids

Fabrication of an Optical Cell Dryer for the Spectroscopic Analysis Cells

Read Article