This content is Free Access.
Power Input Measurements in Stirred Bioreactors at Laboratory Scale
Kapitel
- 00:04Titel
- 00:36Experiment Setup
- 01:27Installation of the Torque Sensor
- 03:49Preparation of the Data Logging and Measurement Recipe
- 05:18Configuration of the Data Acquisition Software
- 06:33Perform the Torque Measurement
- 08:37Results: Measurements of Power Input and Power Number as a Function of Reynolds Number in Different Bioreactors
- 10:09Conclusion
The power input in stirred bioreactors can be measured through the torque that acts on the impeller shaft during rotation. This manuscript describes how an air bearing can be used to effectively reduce friction losses observed in mechanical seals and improve the accuracy of power input measurements in small-scale vessels.
