JOVE JOURNAL

Ingenieurwesen

Showing 145 - 156 in 658 videos.

Bacterial Cellulose Spheres that Encapsulate Solid Materials

Laurel A. Bitterman, Adolfo Martinez, Catherine Mulholland, Tyler Somerville, Dario Prieto-Centurion, Katherine R. Zodrow

¹Department of Environmental Engineering,Montana Technological University, ²Department of Petroleum Engineering,Montana Technological University, ³Department of Metallurgical & Materials Engineering,Montana Technological University, ⁴Department of Mechanical Engineering,Montana Technological University

Journal (Engineering)

Lumped-Parameter and Finite Element Modeling of Heart Failure with Preserved Ejection Fraction

Luca Rosalia*^1,2, Caglar Ozturk*¹, Ellen T. Roche^2,3

¹Institute for Medical Engineering and Science,Massachusetts Institute of Technology, ²Health Science and Technology Program,Harvard/Massachusetts Institute of Technology, ³Department of Mechanical Engineering,Massachusetts Institute of Technology

Journal (Engineering)

Laboratory Scale Slow Cook-Off Testing of Rocket Propellants: The Combustion Rate Analysis of a Slowly Heated Propellant (CRASH-P) Test

Jonathan Essel, Andrew Nelson, Christopher Gray, Scott Sumner, Nathan Holl

¹Naval Air Warfare Center Weapons Division

Journal (Engineering)

Integration of 5G Experimentation Infrastructures into a Multi-Site NFV Ecosystem

Borja Nogales*¹, Luis F. Gonzalez*¹, Ivan Vidal*¹, Francisco Valera*¹, Jaime Garcia-Reinoso*¹, Diego R. Lopez*², Juan Rodríguez*², Neftali Gonzalez*³, Ignacio Berberana*³, Arturo Azcorra*^1,3

¹Department of Telematic Engineering,Universidad Carlos III de Madrid, ²Telefónica I+D, ³IMDEA Networks Institute

Journal (Engineering)

Automated Delivery of Microfabricated Targets for Intense Laser Irradiation Experiments

Yonatan Gershuni², Michal Elkind², Dolev Roitman², Itamar Cohen², Aviad Tsabary², Deep Sarkar², Ishay Pomerantz²

¹The School of Physics and Astronomy,Tel Aviv University, ²Tel Aviv University Center for Light-Matter Interaction

Journal (Engineering)

Twin-Screw Extrusion Process to Produce Renewable Fiberboards

Philippe Evon, Laurent Labonne, Saif Ullah Khan^2,3, Pierre Ouagne, Pierre-Yves Pontalier, Antoine Rouilly

¹Laboratoire de Chimie Agro-industrielle (LCA),Université de Toulouse, INRAE, INPT, ²Balochistan University of Information Technology, Engineering and Management Sciences, ³Laboratoire Génie de Production (LGP),Université de Toulouse, INPT

Journal (Engineering)

Design and Development of a Three-Dimensionally Printed Microscope Mask Alignment Adapter for the Fabrication of Multilayer Microfluidic Devices

Celine R. Garcia*¹, Zhenya Ding*¹, Hilario C. Garza, Wei Li

¹Department of Chemical Engineering,Texas Tech University

Journal (Engineering)

Improving the Combustion Performance of a Hybrid Rocket Engine using a Novel Fuel Grain with a Nested Helical Structure

Zezhong Wang², Xin Lin, Fei Li, Zelin Zhang, Xilong Yu²

¹Institute of Mechanics,Chinese Academy of Sciences, ²School of Engineering Science,University of Chinese Academy of Sciences

Journal (Engineering)

A Multi-Cue Bioreactor to Evaluate the Inflammatory and Regenerative Capacity of Biomaterials under Flow and Stretch

Suzanne E. Koch², Eline E. van Haaften², Tamar B. Wissing², Lizzy A. B. Cuypers, Jurgen A. Bulsink, Carlijn V. C. Bouten², Nicholas A. Kurniawan*^1,2, Anthal I. P. M. Smits*^1,2

¹Department of Biomedical Engineering,Eindhoven University of Technology, ²Institute for Complex Molecular Systems (ICMS),Eindhoven University of Technology

Journal (Engineering)

Calibration Procedures for Orthogonal Superposition Rheology

Ran Tao², Aaron M. Forster

¹Material Measurement Laboratory,National Institute of Standards and Technology, ²Department of Chemical Engineering,Texas Tech University

Journal (Engineering)

Treating Surfaces with a Cold Atmospheric Pressure Plasma using the COST-Jet

Judith Golda, Kerstin Sgonina, Julian Held, Jan Benedikt, Volker Schulz-von der Gathen

¹Experimental Plasma Physics,Kiel University, ²Experimental Physics II,Ruhr-University Bochum

Journal (Engineering)

3D Printing – Evaluating Particle Emissions of a 3D Printing Pen

Heike Sigloch, Frank S. Bierkandt, Ajay V. Singh, Ashish K. Gadicherla, Peter Laux, Andreas Luch

¹Department of Chemical and Product Safety,German Federal Institute for Risk Assessment (BfR), ²Department of Biological Safety,German Federal Institute for Risk Assessment (BfR)

1…12 13 14 15 16 17…55