Journal
/
工程学
/
Additive Manufacturing-Enabled Low-Cost Particle Detector
JoVE 杂志
工程学
This content is Free Access.
JoVE 杂志 工程学
Additive Manufacturing-Enabled Low-Cost Particle Detector

Additive Manufacturing-Enabled Low-Cost Particle Detector

DOI:
10.3791/64844-v

•

06:05 min

•

March 24, 2023

•

, , ,
1Silicon Austria Labs, 2Graz University of Technology

Chapters

  • 00:04Introduction
  • 00:42Electrode Manufacturing
  • 01:41Assembling the Sensor
  • 02:41Testing the Particle Sensor
  • 04:34Results: Test Results of the Low‐Cost Particle Detector
  • 05:25Conclusion

Summary

自动翻译

自动翻译

Here, we present a protocol on how to build and test a simple but efficient low-cost particle detector.

Tags

Additive ManufacturingParticle DetectorParticle EmissionsParticle SensorSoot DetectionMetal DetectionPower PlantsWildfiresIndustriesAutomobilesCopper PipesElectrodesSolderingCableGlueEpoxyVacuum SealHigh Voltage Power Supply

Article

Embed

添加到播放列表

Usage Statistics

Related Videos

Echo Particle Image Velocimetry

High-speed Particle Image Velocimetry Near Surfaces

Micro-masonry for 3D Additive Micromanufacturing

Development of an Experimental Setup for the Measurement of the Coefficient of Restitution under Vacuum Conditions

Flow-assisted Dielectrophoresis: A Low Cost Method for the Fabrication of High Performance Solution-processable Nanowire Devices

Additive Manufacturing of Functionally Graded Ceramic Materials by Stereolithography

Simultaneous Measurement of Turbulence and Particle Kinematics Using Flow Imaging Techniques

Quantifying the Relative Thickness of Conductive Ferromagnetic Materials Using Detector Coil-Based Pulsed Eddy Current Sensors

Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy

Manufacturing, Control, and Performance Evaluation of a Gecko-Inspired Soft Robot

Read Article