Journal
/
工程学
/
Hydrogen Charging of Aluminum using Friction in Water
JoVE 杂志
工程学
需要订阅 JoVE 才能查看此.  登录或开始免费试用。
JoVE 杂志 工程学
Hydrogen Charging of Aluminum using Friction in Water

Hydrogen Charging of Aluminum using Friction in Water

DOI:
10.3791/60711-v

•

07:50 min

•

January 28, 2020

•

,
1Department of Mechanical Science and Bioengineering,Osaka University

Chapters

  • 00:04Introduction
  • 00:43Preparing the Test Pieces
  • 01:47Friction in Water Procedure
  • 03:46Evaluating the Test Pieces
  • 04:06Measuring Hydrogen Absorption
  • 05:13Results: Hydrogen Concentration and Embrittlement
  • 07:02Conclusion

Summary

自动翻译

自动翻译

In order to introduce high amounts of hydrogen in aluminum and aluminum alloys, a new method of hydrogen charging was developed, called the friction in water procedure.

Tags

Hydrogen ChargingAluminumFrictionWaterOxide FilmStir BarSolution Heat TreatmentPeak-aging Heat TreatmentPolishingReaction VesselMagnetic StirrerArgonGas ChromatographPH Probe

Article

Embed

添加到播放列表

Usage Statistics

Related Videos

Controlling the Size, Shape and Stability of Supramolecular Polymers in Water

The Preparation of Electrohydrodynamic Bridges from Polar Dielectric Liquids

Preparation and Friction Force Microscopy Measurements of Immiscible, Opposing Polymer Brushes

Reaction Kinetics and Combustion Dynamics of I4O9 and Aluminum Mixtures

Experimental Procedure for Warm Spinning of Cast Aluminum Components

Simultaneous Multi-surface Anodizations and Stair-like Reverse Biases Detachment of Anodic Aluminum Oxides in Sulfuric and Oxalic Acid Electrolyte

In Situ High Pressure Hydrogen Tribological Testing of Common Polymer Materials Used in the Hydrogen Delivery Infrastructure

Design and Fabrication of an Optical Fiber Made of Water

Determining Tribocorrosion Rate and Wear-Corrosion Synergy of Bulk and Thin Film Aluminum Alloys

Generating Lap Joints Via Friction Stir Spot Welding on DP780 Steel

Read Article