Journal
/
工程学
/
Quantifying the Relative Thickness of Conductive Ferromagnetic Materials Using Detector Coil-Based Pulsed Eddy Current Sensors
JoVE 杂志
工程学
需要订阅 JoVE 才能查看此.  登录或开始免费试用。
JoVE 杂志 工程学
Quantifying the Relative Thickness of Conductive Ferromagnetic Materials Using Detector Coil-Based Pulsed Eddy Current Sensors

Quantifying the Relative Thickness of Conductive Ferromagnetic Materials Using Detector Coil-Based Pulsed Eddy Current Sensors

DOI:
10.3791/59618-v

•

06:17 min

•

January 16, 2020

•

, , ,
1Melbourne School of Engineering,University of Melbourne, 2Center for Autonomous Systems,University of Technology Sydney

Chapters

  • 00:04Title
  • 00:54PEC Signal Processor Installation
  • 01:41Signal Collection and Application Execution
  • 04:18Results: Representative PEC Signals
  • 05:38Conclusion

Summary

自动翻译

自动翻译

Here, we present a protocol to quantify the relative thickness (i.e., thickness as a percentage with respect to a reference) of conductive ferromagnetic materials using detector coil-based pulsed eddy current sensors, while overcoming the calibration requirement.

Tags

Pulsed Eddy CurrentFerromagnetic MaterialsDetector CoilThickness QuantificationCorrosion AssessmentGraphitizationWool LossSignal ProcessingSoftware InterfaceData Analysis

Article

Embed

添加到播放列表

Usage Statistics

Related Videos

Fabrication of Nano-engineered Transparent Conducting Oxides by Pulsed Laser Deposition

Using Neutron Spin Echo Resolved Grazing Incidence Scattering to Investigate Organic Solar Cell Materials

Preparation and Use of Photocatalytically Active Segmented Ag|ZnO and Coaxial TiO2-Ag Nanowires Made by Templated Electrodeposition

Using Microwave and Macroscopic Samples of Dielectric Solids to Study the Photonic Properties of Disordered Photonic Bandgap Materials

Formation of Thick Dense Yttrium Iron Garnet Films Using Aerosol Deposition

Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores

Characterization of Full Set Material Constants and Their Temperature Dependence for Piezoelectric Materials Using Resonant Ultrasound Spectroscopy

Electrospray Deposition of Uniform Thickness Ge23Sb7S70 and As40S60 Chalcogenide Glass Films

Characterization of Ultra-fine Grained and Nanocrystalline Materials Using Transmission Kikuchi Diffraction

Hybrid Printing for the Fabrication of Smart Sensors

Read Article