Journal
/
工程学
/
High Temperature Fabrication of Nanostructured Yttria-Stabilized-Zirconia (YSZ) Scaffolds by In Situ Carbon Templating Xerogels
JoVE 杂志
工程学
需要订阅 JoVE 才能查看此.  登录或开始免费试用。
JoVE 杂志 工程学
High Temperature Fabrication of Nanostructured Yttria-Stabilized-Zirconia (YSZ) Scaffolds by In Situ Carbon Templating Xerogels

High Temperature Fabrication of Nanostructured Yttria-Stabilized-Zirconia (YSZ) Scaffolds by In Situ Carbon Templating Xerogels

DOI:
10.3791/55500-v

•

07:13 min

•

April 16, 2017

•

, ,
1Department of Chemistry,Wake Forest University, 2Center for Energy, Environment, and Sustainability,Wake Forest University

Chapters

  • 00:05Title
  • 00:44Preparing Xerogel Pellets
  • 03:04Sintering the Xerogel Pellet in an Inert Atmosphere
  • 03:45Determining Carbon Template Concentration
  • 04:32Preparing High Surface Area YSZ Scaffold by Carbon Template Removal
  • 05:02Results: Fabrication of Porous, Nanostructured YSZ Scaffolds
  • 06:29Conclusion

Summary

自动翻译

自动翻译

A protocol for fabricating porous, nanostructured yttria-stabilized-zirconia (YSZ) scaffolds at temperatures between 1,000 °C and 1,400 °C is presented.

Tags

Nanostructured CeramicsYttria-stabilized-zirconia (YSZ)Carbon TemplatingXerogelsHigh-temperature FabricationSurface AreaMixed Metal Oxide MaterialsZirconium ChlorideGlucoseYttrium NitratePropylene OxideGelationSolvent ExchangeDryingXerogel PowderPellet Pressing

Article

Embed

添加到播放列表

Usage Statistics

Related Videos

Fabrication, Densification, and Replica Molding of 3D Carbon Nanotube Microstructures

Fabrication of Silica Ultra High Quality Factor Microresonators

Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization

Fabrication of 3D Carbon Microelectromechanical Systems (C-MEMS)

Focused Ion Beam Fabrication of LiPON-based Solid-state Lithium-ion Nanobatteries for In Situ Testing

Measurements of Soil Carbon by Neutron-Gamma Analysis in Static and Scanning Modes

Methods of Ex Situ and In Situ Investigations of Structural Transformations: The Case of Crystallization of Metallic Glasses

Radio Frequency Magnetron Sputtering of GdBa2Cu3O7−δ/ La0.67Sr0.33MnO3 Quasi-bilayer Films on SrTiO3 (STO) Single-crystal Substrates

Hybrid Printing for the Fabrication of Smart Sensors

Read Article