How Children Solve Problems Using Causal Reasoning
12,944 Views
•
•
概述
Source: Laboratories of Judith Danovitch and Nicholaus Noles—University of Louisville
Imagine a young child hears an adult say, “I want to watch the news,” then watches the adult press a button on the remote control. A moment later, the television screen turns on. The next day, the child wants to turn on the television screen to watch cartoons. How does the child know what to do? Is it enough to say, “I want to watch cartoons,” or is pushing the button on the remote control necessary, too? Solving this problem requires children to use the information they observed (i.e., the adult’s behaviors) to come up with a solution. In their daily lives, children encounter many situations where they need to decode cause-and-effect from complex or ambiguous observations in order to accomplish a goal.
In order to examine children’s capacity for causal reasoning, psychologists set up tasks using causal scenarios to observe how children draw conclusions and test new hypotheses about the relationships between different types of objects. In these tasks, children are shown interactions involving individual objects or sets of objects. Then, they are asked to identify and use the links between the causes and the effects to solve a problem.
This video demonstrates how to measure children’s causal reasoning about novel objects based on the methods developed by Gopnik and Sobel1 and Gopnik, Sobel, Schulz, and Glymour.2
Procedure
Recruit children ages 3 and 4. For the purposes of this demonstration, only one child is tested. Larger sample sizes (as in the Gopnik and Sobel and Gopnik, Sobel, Schulz, and Glymour studies) 1,2 are recommended when conducting any experiments.
Make sure the participants have no history of developmental disorders and have normal hearing and vision.
1. Obtain the necessary materials.
- Gather a set of 4 wooden blocks of different colors and shapes.
- Prepare a special device that plays music when triggered.
- To build this device, get a box approximately 5 x 7 x 3 in with a sturdy top.
- Inside the box, place a sound-producing device that can be remotely activated (e.g., a wireless speaker or a doorbell may work well for this purpose).
- Ensure that there is a way to turn the device on or off during the experiment without the child noticing.
2. Data collection
- Introduction
- Sit the child on the opposite side of the table from the experimenter with the device on the table between them.
- Introduce the device as follows, “Some blocks make this machine go, and some blocks don't.”
- Instruct the child to figure out which blocks make the machine work.
- One-cause task
- In this task, only one block sets off the device.
- Place one block (Block B) on the device and demonstrate that nothing happens.
- Place a second block (Block A) on the device and activate it so the music plays.
- With Block A still on the device, place Block B back on the device. Have the machine continue playing music.
- Counterbalance the position (to the left or right of Block A) of Block B between subjects.
- Ask the child, “Can you make it stop?” and note the child’s actions.
- Two-cause task
- In this task, two blocks set off the device.
- Use different blocks than those used in the one-cause task.
- Place Block B on the device and activate it so the music plays.
- Remove Block B, then place Block A on the device, and activate it so the music plays.
- With Block A still on the device, place Block B back on the machine.
- Counterbalance the position (to the left or right of Block A) of Block B between subjects.
- Ask the child, “Can you make it stop?” and note the child’s actions.
3. Analysis
- Categorize the children’s responses for each task into four categories: removing block A only, removing Block B only, removing both blocks, or not removing any blocks.
- Compare the number of children who removed Block A in the one-cause and two-cause tasks using chi-square tests.
- Compare the number of children who removed both blocks in the one-cause and two-cause tasks using chi-square tests.
- If children remove Block A more often in the one-cause task than in the two-cause task, and if children remove both blocks more often in the two-cause than in the one-cause task, then this suggests that they can use their observations to deduce which block caused the device to go off.
Children encounter many situations where they need to decode cause-and-effect from complex or ambiguous observations to come up with solutions to problems.
For example, a young child hears an adult say “I want to watch the news” and then observes the adult press a button on the remote control. A moment later, the television turns on and a news station appears on the screen.
The next day, the child wants to watch cartoons. How does she know what to do? Is it enough to say, I want to watch cartoons, or is pushing the button on the remote control necessary, too? The ability to distinguish the relationship between the cause and its effect is referred to as causal reasoning.
Using methods developed by Alison Gopnik and colleagues, this video demonstrates the steps required to set-up and perform an experiment assessing causal reasoning in children, as well as how to analyze the data and interpret the results involving scenarios with novel objects.
In this experiment, children ages 3 to 4 are shown interactions involving individual objects such as blocks and a box that can play music when triggered.
Children are asked to identify and use the links between novel causes and the effects to solve a problem. For example, in a one-cause task, only one block will trigger the box to play music, in this case Block A, rather than Block B.
In the more complicated two-cause task, two different blocks can make the box play music when placed individually.
In both the causal scenarios, children are asked to make the music stop, and which block or blocks they remove is recorded as the dependent variable in the experiment. If cause-and-effect has been correctly inferred, Block A will be removed in the one-cause task, whereas both blocks will be removed in the two-cause task.
Prior to the arrival of the child, place two chairs on opposite sides of a table. Gather four wooden blocks of different colors and shapes. Note that only two blocks will be used at a time. Finally, prepare the special device by placing a sound-producing object, such as a wireless doorbell that can be remotely turned on or off, in a box with a sturdy top.
To begin the study, greet the child and instruct them to sit in a chair across from you.
Introduce the device. “Some blocks make this machine play music, and some blocks don’t.”
Start the one-cause task by placing one block—Block B—on the device to demonstrate that nothing happens. Remove Block B and place the second block—Block A—on the box, which simultaneously activates the music.
With Block A still on the device, place Block B back on the device and have the machine continue playing music.
Once the demonstration is complete, ask the child if they can make the music stop playing and record the data.
Tell the child that they will now play again. Remove all of the blocks from the box and set up for the two-cause task.
Using different blocks, place Block B on the device, which now causes the music to play. Remove Block B and then place Block A on the device, which also activates the music to play.
With Block A still on the device, place Block B back on the machine. Once again, ask the child if they can make the music stop and record the data.
To analyze the results, categorize the number of children who removed Block A, Block B, both blocks, or none of the blocks and graph the percentages of children who showed the responses for both causal scenarios.
In the one-cause task, most children correctly removed the block, in this case Block A that stopped the music.
Likewise, in the two-cause task, more children removed both blocks instead of just one block. These results suggest that preschool children use previous observations and their causal reasoning skills to solve the problem of how to turn off the device.
Now that you are familiar with how young children solve problems using causal reasoning, let’s look at other ways problem-solving scenarios can be applied across development.
Researchers have found that casual reasoning and cognitive ability in children are linked. For instance, the ability to complete a sequential order with reasoning is used as a marker of cognitive development.
The scientific method is based on using observations to draw inferences about cause-and-effect and to apply those inferences to solving novel problems. Way before any formal science education, young children have the capacity to reason about causal relationships between objects in the world, making them natural mini-scientists.
You’ve just watched JoVE’s introduction to causal reasoning in children. Now you should have a good understanding of how to design causal scenarios and run the experiment, as well as analyze and assess the results.
Thanks for watching!
Results
Researchers tested 24 3- and 4-year-old children. They found the children’s most frequent response in the one-cause task was to remove Block A from the device, and the children did so significantly more often than in the two-cause task. Likewise, children’s most frequent response in the two-cause task was to remove both blocks, and they did so significantly more often than in the one-cause task. The researchers also noted that when children in the two-cause task only chose one block, they were equally likely to choose Block A or Block B (Figure 1). This suggests they did not believe either block had a stronger effect on the device. The researchers concluded that preschool children were able to use their previous observations and their causal reasoning skills to solve the problem of how to turn off the device.
Figure 1. Percentage of children who showed each type of response pattern in the one-cause and two-cause tasks.
Applications and Summary
These findings show the power of children’s causal reasoning abilities for solving problems. Children can learn about the world quickly, and they can use their knowledge to figure out the causal relationships between objects. This is true even if they have never seen the objects before (e.g., the music-playing device) and no one has previously demonstrated how to solve the problem.
The ability to use observations to draw inferences about cause-and-effect and to apply those inferences to solving novel problems is one of the basic elements of scientific understanding. The scientific methods rely on the practice of systematically testing how manipulation of different variables produces different effects on the world. These findings suggest that, even before they begin their formal science education, children already have the capacity to reason about the causal relationships between objects in the world. Moreover, they are able to creatively use their understanding to solve problems, even if they have never observed the objects or problems before.
References
- Gopnik, A., & Sobel, D. M. Detecting blickets: How young children use information about novel causal powers in categorization and induction. Child Development. 71 (5), 1205-1222 (2000).
- Gopnik, A., Sobel, D. M., Schulz, L. E., & Glymour, C. Causal learning mechanisms in very young children: two-, three-, and four-year-olds infer causal relations from patterns of variation and covariation. Developmental Psychology. 37 (5), 620 (2001).
成績單
Children encounter many situations where they need to decode cause-and-effect from complex or ambiguous observations to come up with solutions to problems.
For example, a young child hears an adult say “I want to watch the news” and then observes the adult press a button on the remote control. A moment later, the television turns on and a news station appears on the screen.
The next day, the child wants to watch cartoons. How does she know what to do? Is it enough to say, I want to watch cartoons, or is pushing the button on the remote control necessary, too? The ability to distinguish the relationship between the cause and its effect is referred to as causal reasoning.
Using methods developed by Alison Gopnik and colleagues, this video demonstrates the steps required to set-up and perform an experiment assessing causal reasoning in children, as well as how to analyze the data and interpret the results involving scenarios with novel objects.
In this experiment, children ages 3 to 4 are shown interactions involving individual objects such as blocks and a box that can play music when triggered.
Children are asked to identify and use the links between novel causes and the effects to solve a problem. For example, in a one-cause task, only one block will trigger the box to play music, in this case Block A, rather than Block B.
In the more complicated two-cause task, two different blocks can make the box play music when placed individually.
In both the causal scenarios, children are asked to make the music stop, and which block or blocks they remove is recorded as the dependent variable in the experiment. If cause-and-effect has been correctly inferred, Block A will be removed in the one-cause task, whereas both blocks will be removed in the two-cause task.
Prior to the arrival of the child, place two chairs on opposite sides of a table. Gather four wooden blocks of different colors and shapes. Note that only two blocks will be used at a time. Finally, prepare the special device by placing a sound-producing object, such as a wireless doorbell that can be remotely turned on or off, in a box with a sturdy top.
To begin the study, greet the child and instruct them to sit in a chair across from you.
Introduce the device. “Some blocks make this machine play music, and some blocks don’t.”
Start the one-cause task by placing one block—Block B—on the device to demonstrate that nothing happens. Remove Block B and place the second block—Block A—on the box, which simultaneously activates the music.
With Block A still on the device, place Block B back on the device and have the machine continue playing music.
Once the demonstration is complete, ask the child if they can make the music stop playing and record the data.
Tell the child that they will now play again. Remove all of the blocks from the box and set up for the two-cause task.
Using different blocks, place Block B on the device, which now causes the music to play. Remove Block B and then place Block A on the device, which also activates the music to play.
With Block A still on the device, place Block B back on the machine. Once again, ask the child if they can make the music stop and record the data.
To analyze the results, categorize the number of children who removed Block A, Block B, both blocks, or none of the blocks and graph the percentages of children who showed the responses for both causal scenarios.
In the one-cause task, most children correctly removed the block, in this case Block A that stopped the music.
Likewise, in the two-cause task, more children removed both blocks instead of just one block. These results suggest that preschool children use previous observations and their causal reasoning skills to solve the problem of how to turn off the device.
Now that you are familiar with how young children solve problems using causal reasoning, let’s look at other ways problem-solving scenarios can be applied across development.
Researchers have found that casual reasoning and cognitive ability in children are linked. For instance, the ability to complete a sequential order with reasoning is used as a marker of cognitive development.
The scientific method is based on using observations to draw inferences about cause-and-effect and to apply those inferences to solving novel problems. Way before any formal science education, young children have the capacity to reason about causal relationships between objects in the world, making them natural mini-scientists.
You’ve just watched JoVE’s introduction to causal reasoning in children. Now you should have a good understanding of how to design causal scenarios and run the experiment, as well as analyze and assess the results.
Thanks for watching!