Dergi
/
Mühendislik
/
Micropunching Lithography for Generating Micro- and Submicron-patterns on Polymer Substrates
JoVE Journal
Mühendislik
Bu içeriği görüntülemek için JoVE aboneliği gereklidir.  Oturum açın veya ücretsiz deneme sürümünü başlatın.
JoVE Journal Mühendislik
Micropunching Lithography for Generating Micro- and Submicron-patterns on Polymer Substrates

Micropunching Lithography for Generating Micro- and Submicron-patterns on Polymer Substrates

DOI:
10.3791/3725-v

•

09:24 min

•

July 02, 2012

•

, ,
1Mechanical and Aerospace Engineering,University of Texas at Arlington

Bölümler

  • 00:05Başlık
  • 01:05Cutting Operation in MPL: Overview and Initial Steps
  • 01:57Cutting Operation in MPL: Single-layer Microstructures on a Substrate
  • 02:36Cutting Operation in MPL: Multi-layer Microstructures on a Substrate
  • 04:44Drawing Operation in MPL: Making PDMS Micropillars on HDPE Channel Sidewalls
  • 06:25Microstructures Formed by Cutting and Drawing, and Their Application
  • 09:00Conclusion

Özet

Otomatik Çeviri

Otomatik Çeviri

A micropunching lithography approach is developed to generate micro- and submicron-patterns on top, sidewall and bottom surfaces of polymer substrates. It overcomes the obstacles of patterning conducting polymers and generating sidewall patterns. This method allows rapid fabrication of multiple features and is free of aggressive chemistry.

Etiketler

Micropunching LithographyGenerating Micro- And Submicron-patternsPolymer SubstratesConducting PolymersLithographic TechniquesTechnical ChallengesPhotolithographic MethodsWet EtchingDry EtchingMicro/nanosystemsPlanar FormSidewall Patterns3-D CircuitsFluidic ChannelsHorizontal Growth Of Nanowires And NanotubesMacropunching Method

Article

Embed

ÇALMA LİSTESİNE EKLE

Usage Statistics

İlgili Videolar

Ultrahigh Density Array of Vertically Aligned Small-molecular Organic Nanowires on Arbitrary Substrates

Micro-masonry for 3D Additive Micromanufacturing

Adsorption Device Based on a Langatate Crystal Microbalance for High Temperature High Pressure Gas Adsorption in Zeolite H-ZSM-5

Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer

Fabrication of Polymer Microspheres for Optical Resonator and Laser Applications

Radio Frequency Magnetron Sputtering of GdBa2Cu3O7−δ/ La0.67Sr0.33MnO3 Quasi-bilayer Films on SrTiO3 (STO) Single-crystal Substrates

Generating Lap Joints Via Friction Stir Spot Welding on DP780 Steel

Procedure for the Transfer of Polymer Films Onto Porous Substrates with Minimized Defects

A Photonic System for Generating Unconditional Polarization-Entangled Photons Based on Multiple Quantum Interference

In Situ Transmission Electron Microscopy with Biasing and Fabrication of Asymmetric Crossbars Based on Mixed-Phased a-VOx

Read Article