An ATP Utilization Assay for Determining Bacterial Survival Under Antibiotics Treatment

Published: March 29, 2024

Abstract

Source: Wang, Liang-Chun, et al. Quantitative Examination of Antibiotic Susceptibility of Neisseria gonorrhoeae Aggregates Using ATP-utilization Commercial Assays and Live/Dead Staining. J. Vis. Exp. (2019).

This video describes the simple ATP-measuring assay using luciferase glow reagent. This assay is used to quantify Neisseria gonorrhoeae survival after treatment with ceftriaxone.

Protocol

1. Viability quantification of GC aggregations

  1. Collect GC using a sterile applicator. Swab GC from the plate and re-suspend GC in pre-warmed broth(GCP, Table 1) supplemented with 4.2% NaHCO3 and 1% Kellogg solutions. Use spectrophotometry at a wavelength of 650 nm (an OD 650 of 1 = ~1 x 109 CFU/mL) to determine the concentration of suspended bacteria.
  2. Adjust the concentration of GC to ~1 x 108 CFU/mL.
  3. Add 99 µL of adjusted GC suspension into wells of a 96-well plate.
  4. Incubate the plate for 6 h at 37 °C with 5% CO2 to allow the bacteria to aggregate.
  5. Add 1 µL of serial diluted ceftriaxone (1000, 100, 50, 25, 12.5, 6.2, 3.1, 1.5, 0.8, 0.4, 0.2 µg/mL) into each well. Leave some wells untreated to serve as controls.
  6. Incubate the plate for 24 h at 37 °C with 5% CO2.
  7. Sonicate the suspension 3 times in each well for 5 s at 144 W and 20 kHz.
  8. Add 100 µL of commercially available ATP utilization glow reagent into each well, pipette up-and down for 3 times, and incubate for 15 min at 37 °C with 5% CO2.
  9. Carefully transfer 150 µL of mixture from each well into a new well in a 96-well black microplate and avoid introducing bubbles.
  10. Measure the absorbance of each well at 560 nm using the plate reader.
  11. Calculate the survival rate by the ratio of the reading obtained after serial ceftriaxone treatment to the reading from untreated wells.

2. Fluorescence microscopic analysis of Live/Dead of GC aggregates

  1. Collect GC using a sterile applicator. Swab GC from the plate and re-suspend GC in pre-warmed GCP media plus 1% Kellogg supplements.
  2. Determine the number of bacteria by spectrophotometry at a wavelength of 650 nm and adjust the concentration of GC to ~1 x 107 CFU/mL.
  3. Add 198 µL of GC suspension into in 8-well coverslip-bottom chambers.
  4. Incubate the chamber for 6 h at 37 °C with 5% CO2 to allow aggregation formation.
  5. Add 2 µL of ceftriaxone (100 µg/mL or various dilutions) into each well within each aggregation condition. Incubate for the desired time at 37 °C with 5% CO2.
  6. Add 0.6 µL of live/dead staining solution mixture into each well and incubate for 20 min at 37 °C with 5% CO2.
  7. Acquire Z-series images using a confocal microscope (an equivalent microscope can be used).
  8. Analyze the images using ImageJ software for measurement of the size of GC aggregates and the fluorescence intensity ratio FIR of live-to-dead staining in each aggregate.

Table 1: Recipe for 1 L of GCP Bacterial Growth Media.

Equation1

Açıklamalar

The authors have nothing to disclose.

Materials

100x Kellogg's supplement
Agar United States Biological A0930
BacTiter Assay Promega G8232
Ceftriaxone TCI C2226
Difco GC medium base BD 228950
Ferric nitrate, nonahydrate Sigma-Aldrich 254223-10G
Glucose Thermo Fisher Scientific BP350-1
BacLight live/dead staining Invitrogen L7012
MS11 Neisseria gonorrhoeae strain kindly provided by Dr. Herman Schneider, Walter Reed Army Institute for Research
Sonicator Kontes Equivelent to 9110001

Etiketler

Play Video

Bu Makaleden Alıntı Yapın
An ATP Utilization Assay for Determining Bacterial Survival Under Antibiotics Treatment. J. Vis. Exp. (Pending Publication), e22010, doi: (2024).

View Video