Concentration Dependence

Lab Manual
Chemistry
A subscription to JoVE is required to view this content.  Sign in or start your free trial.
Lab Manual Chemistry
Concentration Dependence

28,028 Views

04:37 min

March 26, 2020

Chemical Kinetics and the Reaction Rate Law

Chemical kinetics refers to the rate or speed of a chemical reaction. The rate depends on the mechanism, complexity, and number of reactants in the reaction. Reactant concentration also plays a significant role in the rate of a reaction.

The rate law quantifies this relationship through experimentation. Each reactant contributes to the speed of the reaction by a factor known as the reaction order. This factor can range from zero to two, and it depends on the relationship of that reactant with the rate of the reaction.

r = k[A]m[B]n for aA + bB + … → cC

In this equation, r is the reaction rate, k is the reaction rate constant, [A] and [B] are the concentrations of the reactants A and B, and m and n are the reaction orders of reactants A and B, respectively. The reaction rate, r, is defined as the change in concentration of the product with time and has units of moles per liter per second.

Order of a Reaction

The order of the reaction describes the power dependence that the concentration of reactants has on the reaction rate. The overall reaction order is the sum of the reaction orders for each of the reactants. It is important to remember that the reaction order is NOT related to the stoichiometric factors of the balanced chemical equation. In other words, stoichiometry cannot be used to determine the reaction orders for a chemical reaction. Reaction orders must be determined experimentally

To determine the reaction order, the concentration of the second reactant is held constant, while the concentration of the first reactant is varied. The time it takes for the reaction to occur is measured in seconds; however, this time does not correspond to the time it takes the reaction to go to completion. Instead, this is the time it takes for the reaction to start. The reaction times for the different reactant concentrations are then compared to determine the order. The same series of reactions are performed to determine the order of the second reactant, where the concentration of the first reactant is held constant and the concentration of the second reactant is varied.

By comparing the reaction times, the reaction order can be determined. For example, if the reaction time remains constant despite changes to reactant concentration, then the reactant is zero-order. This means that the rate of the reaction is equal to the reaction rate coefficient, k, which must have units of M/s. If the reaction time changes linearly with changes in concentration (i.e., doubling the concentration affects the reaction time by a factor of 2), then the reactant is first order. This means that the rate of the reaction is equal to the product of the reaction rate coefficient and the concentration of the reactant. In this case, k has units of 1/s. Finally, if the reaction time is affected by a factor of 4 when the concentration of a reactant is doubled, the reactant is second order. This means that the rate of the reaction is equal to the rate constant times the square of the reactant concentration, forming a quadratic relationship. In this case, the units of k must be 1/M⋅s.

The overall order of the reaction is the sum of the individual reaction orders. For example, if the reaction is first order with respect to A, then m = 1. And if the reaction is zero-order with respect to B, then n = 0. The overall order of the reaction is first order because m + n = 1.

Reaction Rate Constant

The rate constant, k, is specific to the reaction and temperature the reaction is performed. The rate constant is determined from the series of experiments. Using the measured rate and the initial reactant concentrations, the rate equation is used to solve for the rate constant. The rate constant is dependent on temperature and is defined by the Arrhenius equation. This equation describes the relationship between k and the activation energy, Ea, the temperature, T, and the ideal gas constant, R. The constant A is a constant of proportionality and is not to be confused with reactant A.

References

  1. Kotz, J.C., Treichel Jr, P.M., Townsend, J.R. (2012). Chemistry and Chemical Reactivity. Belmont, CA: Brooks/Cole, Cengage Learning.
  2. Silderberg, M.S. (2009). Chemistry: The Molecular Nature of Matter and Change. Boston, MA: McGraw Hill.