JOVE JOURNAL

Engineering

Showing 85 - 96 in 658 videos.

1…7 8 9 10 11 12…55

Journal (Engineering)

Mechanoluminescent Visualization of Crack Propagation for Joint Evaluation

Nao Terasaki, Yuki Fujio

¹Sensing System Research Center (SSRC),National Institute of Advanced Industrial Science and Technology (AIST)

Journal (Engineering)

Determination of the Friction Coefficients of Icy Pavements Under Different Amounts of Snowfall

Binghong Pan, Hu Chai, Bin Lu, Yang Shao, Juan Liu, Ranyang Zhang

¹Highway Academy,Chang’an University, ²School of Modern Posts (Logistics School) & Institute of Posts,Xi’an University of Posts and Telecommunications

Journal (Engineering)

Atomic Force Microscopy Cantilever-Based Nanoindentation: Mechanical Property Measurements at the Nanoscale in Air and Fluid

Ashton E. Enrriques, Sean Howard, Raju Timsina, Nawal K. Khadka, Amber N. Hoover, Allison E. Ray, Ling Ding, Chioma Onwumelu, Stephan Nordeng, Laxman Mainali⁷, Gunes Uzer, Paul H. Davis⁸

¹Micron School of Materials Science & Engineering,Boise State University, ²Department of Mechanical & Biomedical Engineering,Boise State University, ³Department of Physics,Boise State University, ⁴Energy and Environmental Science and Technology,Idaho National Laboratory, ⁵Science and Technology,Idaho National Laboratory, ⁶Harold Hamm School of Geology & Geological Engineering,University of North Dakota, ⁷Biomolecular Sciences Graduate Program,Boise State University, ⁸Center for Advanced Energy Studies

Journal (Engineering)

Application of Deep Learning-Based Medical Image Segmentation via Orbital Computed Tomography

Yeon Woong Chung², Dong Gyun Kang, Yong Oh Lee, Won-Kyung Cho⁵

¹College of Medicine,The Catholic University of Korea, ²Department of Ophthalmology,St. Vincent’s Hospital, ³Yeoncheon Public Medical Center, ⁴Department of Industrial and Data Engineering,Hongik University, ⁵Department of Ophthalmology,Uijeongbu St. Mary’s Hospital

Journal (Engineering)

Quantifying Arms and Legs Contributions during Repetitive Electrically-Assisted Sit-To-Stand Exercise in Paraplegics: A Pilot Study

Musfirah Abd Aziz², Nur Azah Hamzaid², Nazirah Hasnan

¹Biomechatronics and Neuroprosthetics Laboratory, Department of Biomedical Engineering, Faculty of Engineering,Universiti Malaya, ²Center for Applied Biomechanics (CAB), Department of Biomedical Engineering, Faculty of Engineering,Universiti Malaya, ³Department of Rehabilitation Medicine, Faculty of Medicine,Universiti Malaya

Journal (Engineering)

Development of Efficient OLEDs from Solution Deposition

Manish Kumar², Luiz Pereira

¹Department of Physics and i3N, Institute for Nanostructures, Nanomodulation and Nanofabrication,University of Aveiro, ²CeNTI, Centre for Nanotechnologies and Smart Materials

Journal (Engineering)

Design and Application of a Fault Detection Method Based on Adaptive Filters and Rotational Speed Estimation for an Electro-Hydrostatic Actuator

Yongling Fu², Yuxuan Ma², Zhenyu Gou, Tuanhui Guo², Junhao Liu², Jiangao Zhao⁴

¹School of Mechanical Engineering and Automation,Beihang University, ²Laboratory of Aerospace Servo Actuation and Transmission,Beihang University, ³AVIC Chengdu Aircraft Design & Research Institute, ⁴Research Institute for Frontier Science,Beihang University

Journal (Engineering)

Determination of the Mechanical Properties of Flexible Connectors for Use in Insulated Concrete Wall Panels

Fray F. Pozo-Lora, Marc Maguire

¹Civil & Environmental Engineering Department,Pontificia Universidad Catolica Madre y Maestra, ²Durham School of Architectural Engineering and Construction,University of Nebraska-Lincoln

Journal (Engineering)

Microfluidic Acoustophoresis for Flowthrough Separation of Gram-Negative Bacteria using Aptamer Affinity Beads

Hong Jin Choi, Byung Woo Kim, SangWook Lee, Ok Chan Jeong^2,4

¹Department of Digital Anti-Aging Health Care,Inje University, ²Micro device Lab Co., Ltd, ³Biohealth Products Research Center (BPRC),Inje University, ⁴Department of Biomedical Engineering,Inje University

Journal (Engineering)

Frugal Imaging Technique of Capillary Flow Through Three-Dimensional Polymeric Printing Powders

Katrina J. Donovan, James Stasiak, Şebnem Özbek, Willie E. Rochefort, Travis W. Walker

¹Materials and Metallurgical Engineering Department,South Dakota School of Mines & Technology, ²HP Labs,HP Inc, ³Chemical and Biological Engineering Department,South Dakota School of Mines & Technology, ⁴School of Chemical, Biological, and Environmental Engineering,Oregon State University

Journal (Engineering)

Microtensiometer for Confocal Microscopy Visualization of Dynamic Interfaces

Steven V. Iasella, Sourav Barman, Clara Ciutara, Boxun Huang, Michael L. Davidson, Joseph A. Zasadzinski

¹Department of Chemical Engineering and Materials Science,University of Minnesota, ²Department of Chemical Engineering,Carnegie Mellon University

Journal (Engineering)

Triplet Fusion Upconversion Nanocapsule Synthesis

Tracy H. Schloemer², Samuel N. Sanders, Qi Zhou, Pournima Narayanan, Manchen Hu, Mahesh K. Gangishetty, Daniel Anderson, Michael Seitz², Arynn O. Gallegos, R. Christopher Stokes, Daniel N. Congreve²

¹Rowland Institute,Harvard University, ²Department of Electrical Engineering,Stanford University, ³Department of Chemistry,Stanford University

1…7 8 9 10 11 12…55