Journal
/
Engenharia
/
Sensitivity Enhancement of Soft Capacitive Pressure Sensors Using a Solvent Evaporation-Based Porosity Control Technique
JoVE Journal
Engenharia
É necessária uma assinatura da JoVE para visualizar este conteúdo.  Faça login ou comece sua avaliação gratuita.
JoVE Journal Engenharia
Sensitivity Enhancement of Soft Capacitive Pressure Sensors Using a Solvent Evaporation-Based Porosity Control Technique

Sensitivity Enhancement of Soft Capacitive Pressure Sensors Using a Solvent Evaporation-Based Porosity Control Technique

DOI:
10.3791/65143-v

•

10:28 min

•

March 24, 2023

•

, , , ,
1State Key Laboratory of Industrial Control Technology, College of Control Science and Engineering,Zhejiang University

Capítulos

  • 00:04Introduction
  • 00:38Fabrication of the Soft Capacitive Pressure Sensor with a Porous PDMS Dielectric Layer
  • 07:00Experimental Process of Sensor Performance Characterization
  • 08:08Results: Simulation and Characterization of Soft Capacitive Pressure Sensors
  • 09:57Conclusion

Summary

Tadução automática

Tadução automática

A simple and cost-efficient fabrication method based on the solvent evaporation technique is presented to optimize the performance of a soft capacitive pressure sensor, which is enabled by porosity control in the dielectric layer using different mass ratios of the molding PDMS/toluene solution.

Tags

Soft Capacitive Pressure SensorSolvent EvaporationPorosity ControlDielectric LayerPorous PDMSSugar-erythritol TemplateECPC ElectrodeCarbon NanotubesFlexible Sensor

Article

Embed

ADICIONAR À PLAYLIST

Usage Statistics

Vídeos Relacionados

Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics

Synthesis and Microdiffraction at Extreme Pressures and Temperatures

Casting Protocols for the Production of Open Cell Aluminum Foams by the Replication Technique and the Effect on Porosity

Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores

Blast Quantification Using Hopkinson Pressure Bars

The Measurement of Unsteady Surface Pressure Using a Remote Microphone Probe

Solvent Bonding for Fabrication of PMMA and COP Microfluidic Devices

Gain-compensation Methodology for a Sinusoidal Scan of a Galvanometer Mirror in Proportional-Integral-Differential Control Using Pre-emphasis Techniques

Study of Siphon Breaker Experiment and Simulation for a Research Reactor

Studying Large Amplitude Oscillatory Shear Response of Soft Materials

Read Article