Journal
/
Engenharia
/
Lumped-Parameter and Finite Element Modeling of Heart Failure with Preserved Ejection Fraction
JoVE Journal
Engenharia
É necessária uma assinatura da JoVE para visualizar este conteúdo.  Faça login ou comece sua avaliação gratuita.
JoVE Journal Engenharia
Lumped-Parameter and Finite Element Modeling of Heart Failure with Preserved Ejection Fraction

Lumped-Parameter and Finite Element Modeling of Heart Failure with Preserved Ejection Fraction

DOI:
10.3791/62167-v

•

09:20 min

•

February 13, 2021

•

, ,
1Institute for Medical Engineering and Science,Massachusetts Institute of Technology, 2Health Science and Technology Program,Harvard/Massachusetts Institute of Technology, 3Department of Mechanical Engineering,Massachusetts Institute of Technology

Capítulos

  • 00:05Introduction
  • 00:43Zero-Dimensional (0D) Lumped-Parameter Model
  • 01:48Finite Element Analysis (FEA) Model
  • 04:38Aortic Valve Stenosis
  • 05:29Heart Failure with Preserved Ejection Fraction (HFpEF) Hemodynamics
  • 06:46Results: Representative Lumped-Parameter and FEA Heart Failure Modeling
  • 08:26Conclusion

Summary

Tadução automática

Tadução automática

This work introduces two computational models of heart failure with preserved ejection fraction based on a lumped-parameter approach and finite element analysis. These models are used to evaluate the changes in the hemodynamics of the left ventricle and related vasculature induced by pressure overload and diminished ventricular compliance.

Tags

Keywords: Lumped-parameter ModelingFinite Element ModelingHeart FailurePreserved Ejection FractionCardiovascular HemodynamicsComputational ModelingMedical Device DevelopmentHeart ModelingCardiac MechanicsCardiac Electrophysiology

Article

Embed

ADICIONAR À PLAYLIST

Usage Statistics

Vídeos Relacionados

check_url/pt/62167?article_type=v

In Situ Time-dependent Dielectric Breakdown in the Transmission Electron Microscope: A Possibility to Understand the Failure Mechanism in Microelectronic Devices
check_url/pt/62167?article_type=v

Fabrication of High Contrast Gratings for the Spectrum Splitting Dispersive Element in a Concentrated Photovoltaic System
check_url/pt/62167?article_type=v

Failure Analysis of Batteries Using Synchrotron-based Hard X-ray Microtomography
check_url/pt/62167?article_type=v

Using Synchrotron Radiation Microtomography to Investigate Multi-scale Three-dimensional Microelectronic Packages
check_url/pt/62167?article_type=v

In Vitro Culture of Epicardial Cells From Mouse Embryonic Heart
check_url/pt/62167?article_type=v

A Fabrication and Measurement Method for a Flexible Ferroelectric Element Based on Van Der Waals Heteroepitaxy
check_url/pt/62167?article_type=v

Enhanced Electron Injection and Exciton Confinement for Pure Blue Quantum-Dot Light-Emitting Diodes by Introducing Partially Oxidized Aluminum Cathode
check_url/pt/62167?article_type=v

A Rapid Method for Modeling a Variable Cycle Engine
check_url/pt/62167?article_type=v

Production of a Strain-Measuring Device with an Improved 3D Printer
check_url/pt/62167?article_type=v

Visualization of Failure and the Associated Grain-Scale Mechanical Behavior of Granular Soils under Shear using Synchrotron X-Ray Micro-Tomography

Read Article