Journal
/
Engenharia
/
Hybrid Printing for the Fabrication of Smart Sensors
JoVE Journal
Engenharia
É necessária uma assinatura da JoVE para visualizar este conteúdo.  Faça login ou comece sua avaliação gratuita.
JoVE Journal Engenharia
Hybrid Printing for the Fabrication of Smart Sensors

Hybrid Printing for the Fabrication of Smart Sensors

DOI:
10.3791/58677-v

•

08:35 min

•

January 31, 2019

•

, , , , ,
1Institute for Intelligent Systems Technologies,Alpen-Adria-Universität Klagenfurt, 2Carinthian Tech Research AG, 3Department for Nanostructured Materials,Jozef Stefan Institute

Capítulos

  • 00:04Título
  • 00:51Preparation of 3D-printed Substrate, Fabrication of Interconnects and Adjustment of Printer Parameters for the First Layer
  • 02:53Curing Parameter Adjustments for the First Layer
  • 03:44Inkjet Printing and Curing of the First Device Layer
  • 04:41Inspection of the Surface Properties of the Respective Substrates for Printability and Inkjet Printing and Curing of Subsequent Device Layers
  • 06:37Results: Surface Analyses and Measurement Results from a Capacitive Sensor System Prototype
  • 07:50Conclusion

Summary

Tadução automática

Tadução automática

Here we present a protocol for the fabrication of inkjet-printed multilayer sensor structures on additively manufactured substrates and foil.

Tags

Keywords: 3D PrintingInkjet PrintingSmart SensorsHybrid PrintingFabricationSubstrate PropertiesInk PropertiesConductive AdhesiveMicro-dispenserCuringDrop Size TestingPhotonic Curing

Article

Embed

ADICIONAR À PLAYLIST

Usage Statistics

Vídeos Relacionados

check_url/pt/58677?article_type=v

Fabrication of VB2/Air Cells for Electrochemical Testing
check_url/pt/58677?article_type=v

Patterning via Optical Saturable Transitions – Fabrication and Characterization
check_url/pt/58677?article_type=v

Experiments on Ultrasonic Lubrication Using a Piezoelectrically-assisted Tribometer and Optical Profilometer
check_url/pt/58677?article_type=v

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization
check_url/pt/58677?article_type=v

Nanostructured Ag-zeolite Composites as Luminescence-based Humidity Sensors
check_url/pt/58677?article_type=v

Scalable Stamp Printing and Fabrication of Hemiwicking Surfaces
check_url/pt/58677?article_type=v

Quantifying the Relative Thickness of Conductive Ferromagnetic Materials Using Detector Coil-Based Pulsed Eddy Current Sensors
check_url/pt/58677?article_type=v

Fabrication of Compressed Hosiery and Measurement of its Pressure Characteristic Exerted on the Lower Limbs
check_url/pt/58677?article_type=v

Development of Efficient OLEDs from Solution Deposition
check_url/pt/58677?article_type=v

Fabrication of Carbon-Based Ionic Electromechanically Active Soft Actuators

Read Article