Journal
/
Engenharia
/
实时直流偏置的动态法切换时间改善严重欠阻尼边缘化场静电MEMS致动器
JoVE Journal
Engenharia
É necessária uma assinatura da JoVE para visualizar este conteúdo.  Faça login ou comece sua avaliação gratuita.
JoVE Journal Engenharia
Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators
Please note that all translations are automatically generated. Click here for the English version.

实时直流偏置的动态法切换时间改善严重欠阻尼边缘化场静电MEMS致动器

DOI:
10.3791/51251-v

•

11:44 min

•

August 15, 2014

•

, , , ,
1Department of Electrical and Computer Engineering,University of California, Davis, 2Digital Light Projection (DLP) Technology Development,Texas Instruments, 3Birck Nanotechnology Center and the Department of Electrical and Computer Engineering,Purdue University

Capítulos

  • 00:05Título
  • 01:08Fabrication of Electrostatic Fringing-field Actuated (EFFA) MEMS Fixed-fixed Beams
  • 08:28Experimental Validation of Dynamic Waveform Biasing
  • 10:23Results: Measured Pull-down and Released States of a MEMS Bridge
  • 11:16Conclusion

Summary

Tadução automática

Tadução automática

当执行使用传统的一步偏置开关操作的边缘电场静电MEMS驱动器会导致固有的低挤压膜阻尼条件和长期稳定时间坚固的设备设计。实时的切换时间的改善，提供直流动态波形降低了边缘场的建立时间之间的转换时，MEMS致动器向上到向下和向下到向上的状态。

Tags

Real-time DC-dynamic BiasingSwitching Time ImprovementUnderdamped Fringing-field Electrostatic MEMS ActuatorsFast Switching OperationSettling TimeTransient Applied Bias WaveformsMechanical Quality FactorSubstrate RemovalReliabilityStictionCharge PumpCMOS ProcessingExperimental ValidationSwitching Time Improvement

Article

Embed

ADICIONAR À PLAYLIST

Usage Statistics

Vídeos Relacionados

有机硅为基础的介电弹性体致动器的制作工艺

紧凑的镜头少数字全息显微镜的MEMS检测与表征

自由形式的光驱动器 - 制作和开动控制在微观尺度

3D碳微机电系统（C-MEMS）的制造

高效宽量程可调谐 MEMS 滤波器的设计与表征方法

金属/LaAlO 的生长和静电/化学性质3/SrTiO3异

斜腔软气动网络驱动器的研制

玻璃到金属密封结构的优化密封工艺和实时监控

快速制造薄软气动执行器和机器人

基于混合相位a-VOx的不对称横杆的偏置和制造现场传输电子显微镜

Read Article