Summary

Phenotypic Profiling of Human Stem Cell-Derived Midbrain Dopaminergic Neurons

Published: July 07, 2023
doi:

Summary

This protocol describes the cell culturing of human midbrain dopaminergic neurons, followed by immunological staining and the generation of neuronal phenotypic profiles from acquired microscopic high-content images allowing the identification of phenotypic variations due to genetic or chemical modulations.

Abstract

Parkinson's disease (PD) is linked to a range of cell biological processes that cause midbrain dopaminergic (mDA) neuron loss. Many current in vitro PD cellular models lack complexity and do not take multiple phenotypes into account. Phenotypic profiling in human induced pluripotent stem cell (iPSC)-derived mDA neurons can address these shortcomings by simultaneously measuring a range of neuronal phenotypes in a PD-relevant cell type in parallel. Here, we describe a protocol to obtain and analyze phenotypic profiles from commercially available human mDA neurons. A neuron-specific fluorescent staining panel is used to visualize the nuclear, α-synuclein, Tyrosine hydroxylase (TH), and Microtubule-associated protein 2 (MAP2) related phenotypes. The described phenotypic profiling protocol is scalable as it uses 384-well plates, automatic liquid handling and high-throughput microscopy. The utility of the protocol is exemplified using healthy donor mDA neurons and mDA neurons carrying the PD-linked G2019S mutation in the Leucine-rich repeat kinase 2 (LRRK2) gene. Both cell lines were treated with the LRRK2 kinase inhibitor PFE-360 and phenotypic changes were measured. Additionally, we demonstrate how multidimensional phenotypic profiles can be analyzed using clustering or machine learning-driven supervised classification methods. The described protocol will particularly interest researchers working on neuronal disease modeling or studying chemical compound effects in human neurons.

Introduction

A variety of cell biological processes are disturbed in Parkinson's disease (PD). For example, mitochondrial dysfunction, oxidative stress, protein degradation defects, disruption of vesicular trafficking and endolysosomal function have been associated with midbrain dopaminergic (mDA) neuron loss, are commonly observed in PD1. Therefore, PD appears to involve multiple disease mechanisms that can interact with and worsen each other. One useful way to investigate this mechanistic interplay is the creation of a comprehensive phenotypic fingerprint or profile of midbrain dopaminergic (mDA) neurons.

Phenotypic profiling is an approach that involves creating a profile of a sample based on a collection of measurable characteristics, and second, it involves making predictions about a sample based on this profile2,3. The goal of profiling is to capture a diverse range of features, some of which may not have been previously associated with a disease or treatment3. As a result, profiling can reveal unexpected biological processes. Phenotypic profiling typically relies on fluorescently stained cells, and standardized assays, such as Cell Painting, have been developed to create phenotypic profiles4. Recently, phenotypic profiling has, for example, been applied for the characterization of small molecules or the accurate prediction of PD-subtypes solely based on patient-derived fibroblasts5,6. Despite these advances, phenotypic profiling has rarely been applied to post-mitotic differentiated cells, such as human induced pluripotent stem cell (iPSC)-derived mDA neurons that express PD-linked mutations such as LRRK2 G2019S. Significant challenges of iPSC-derived models include the presence of subtle or variable pathological features across differentiation batches or genotypes, and the fact that isolated PD phenotypes do not capture the full complexity of the disease. Furthermore, while iPSC neuronal models are physiologically relevant, they are rarely used in PD drug discovery processes due to concerns about technical complexity7,8.

We previously developed a robust methodology to measure multiple PD-related pathophysiological phenotypes in human mDA neurons that are both sensitive to genetic and chemical compound-induced phenotypic changes9. This article describes in detail a further optimized version of this methodology to create phenotypic profiles from mDA neurons (Figure 1). This protocol has several advantages over the previously described phenotypic profiling approaches, such as the use of high-quality mDA neurons and technical reproducibility. For the first time, this protocol enables phenotypic profiling in physiologically relevant post-mitotic mDA neurons after chemical perturbations in a highly scalable fashion. Fully differentiated and cryopreserved mDA neurons are commercially available, significantly decreasing batch-to-batch differentiation variability. Secondly, technical variability can be further reduced by using a well-defined experimental design (i.e., culture duration or avoiding edge wells), automated liquid handling and automated microscopy. Additionally, the initial steps of phenotypic profile analysis using unsupervised clustering or supervised classification approaches are outlined here, indicating how phenotypic profiling data can be analyzed. This protocol will be of use for researchers interested in phenotypic changes of mDA neurons induced by genetic or chemical perturbations, specifically when a highly scalable study setup is required, for example, during screening campaigns or when the effects of a smaller number of compounds are to be studied, for example, to determine toxic effects. In summary, it is anticipated that the application of phenotypic profiling of human neurons is a valuable technique to study complex disease-related phenotypes and characterize the cellular effects of drug candidates.

Figure 1
Figure 1: Schematic depiction of the experimental protocol to generate image-based phenotypic profiles from human iPSC-derived mDA neurons. Please click here to view a larger version of this figure.

Protocol

1. Preparation of medium and plates for neuron seeding (Day 1)

  1. To prepare the plates for neuron seeding on Day-1, warm Laminin to room temperature (RT) just before use. Prepare the Laminin solution by diluting the Laminin stock solution (0.1 mg/mL) 1/10 in cold PBS+/+ (with Ca2+ and Mg2+).
    NOTE: All reagents are listed in the Table of Materials. The compositions of solutions and buffers are described in Tables 1-4.
  2. Then, add 25 µL of the Laminin solution to each well of a Poly-D-Lysine (PDL) precoated 384-well plate, and incubate overnight at 4 °C. The coated plates can be stored at 4 °C for up to one week.
    NOTE: The protocol can be paused here for up to one week. Seal plates using plastic film.
  3. Prepare Complete Maintenance Media and store at 4 °C for up to one month (Table 1).

2. Thawing of neurons (Day 0)

  1. To thaw the neurons on Day 0, prewarm a water bath to 37 °C, and equilibrate the Complete Maintenance Media to RT, protected from light.
  2. Take the vial containing the commercially obtained frozen neurons (see Table of Materials) out of the liquid nitrogen tank and place it on dry ice. Then place the vial in the water bath for 2 min. Once the liquid is completely thawed, disinfect the vial with 70% ethanol.
  3. Aspirate the thawed neurons with a P1000 pipette (around 370 µL) and transfer them in a 50 mL centrifuge tube without up-and-down pipetting. Next, rinse the vial with 630 µL of Complete Maintenance Medium, dispense drop by drop (45° angle) in the 50 mL tube. Agitate slowly while dispensing.
    NOTE: It is critical to dispense the medium slowly, drop by drop, to avoid osmotic rupture of the cells. A 45° angle and light agitation minimizes high local osmotic pressure during pipetting.
  4. Similarly, add 1 mL of Complete Maintenance Medium in the 50 mL centrifuge tube with a P1000 pipette. Then, slowly add 2 mL of Complete Maintenance Medium. Agitate carefully while dispensing.
  5. Count the cells. Prepare a microtube with 10 µL Trypan Blue and 10 µL cell suspension and add to a counting chamber slide (10 µL). Perform counting using an automated cell counter (see Table of Materials) or manually.
  6. After counting, centrifuge the 50 mL tube containing the neurons at 400 x g for 5 min at RT, and remove the supernatant. Carefully resuspend the pellet using a P1000 pipette and 1 mL of Complete Maintenance Medium. Then add the necessary volume to reach the desired concentration (300,000 cells/mL, see also next step).

3. Seeding of neurons on prepared plates (Day 0)

  1. To seed neurons on the prepared plates on Day 0, take the coated plates out of the refrigerator, place them under the cell culture hood and let them equilibrate to RT for about 30 min.
  2. Just before seeding, aspirate 15 µL coating solution with an automated liquid handler or a 16-channel pipette. Leave approximately 10 µL per well to prevent damage to the coating.
  3. Next, dispense 50 µL of the cell solution containing 300,000 cells/mL (prepared in step 2.6) per well with a 16-channel pipette, resulting in 15,000 seeded neurons per well and a final volume per well of 60 µL.
  4. In a 384-well plate, avoid using columns 1, 2, 23, 24, and rows A, B, O, and P to minimize possible edge effects which can impact the phenotypic profiles. Fill the unused empty wells with 80 µL of PBS. Incubate the plates at 37 °C and 5% CO2.

4. Medium change or compound treatment (Day 3)

  1. Depending on the number wells, pre-warm an appropriate volume of Complete Maintenance Medium at RT. Protect from light.
  2. If a medium change is required, proceed to step 4.4. If compound treatment is desired, verify the compound stock concentration and the used solvent (water, DMSO, methanol, etc.).
  3. Prepare a 1.5x concentrated compound solution for all desired concentrations to be tested. Prepare the compound dilutions using Complete Maintenance Medium.
    NOTE: As a neutral control, use the respective solvent at the same concentration as the tested compound. If multiple or unknown compounds at different concentrations are used, it is advisable to perform a separate dose-response experiment to measure solvent effects on the phenotypic profile.
  4. If an automatic pipetting system is used, add 60 µL of the 1.5x compound solution to a 384-well storage plate. Alternatively, use a 16-channel pipette. If a medium change is required, add 60 µL of Complete Maintenance Medium instead.
  5. Using the automatic pipetting system, aspirate and discard 40 µL of medium per well from the neuron-containing plate to keep 20 µL/well. Then add 40 µL/well of 1.5x compound solution from the 384-well storage plate to each well to obtain the desired final concentration.
    NOTE: It is critical not to perform full medium changes but to always leave residual medium in the well to prevent damage to the neuronal carpet or the coating.
  6. In case neuronal culture is performed for more than the 6 days described in this protocol, change the medium every 2-3 days.

5. Neuron fixation and staining (Days 6 to 7)

  1. To fix and stain the neurons on Days 6 and 7, make use of an automated liquid handler for all dispensing and washing steps. Alternatively, use a 16-channel pipette.
  2. Prepare a 10% Triton X-100 solution by diluting Triton X-100 in 1x PBS. Vortex until the solution is homogeneous. Store at 4 °C.
  3. To fix the neurons, dispense 20 µL/well of 16% PFA resulting in a 4% final concentration. Incubate the plate for 30 min at RT, and wash it three times with 1x PBS. Leave 20 µL/well of PBS after the last wash.
    CAUTION: PFA is recognized as a hazardous substance known to cause oral, dermal, and respiratory toxicity. It also poses a threat to the eyes and may lead to genetic mutations and cancer. Proper handling of PFA requires the use of suitable personal protective equipment, such as eye and face protection, in addition to ensuring proper ventilation. It is important to prevent the release of PFA into the environment.
  4. For permeabilization and blocking, prepare a 2x blocking solution (Table 2).
  5. Add 20 µL/well of 2x blocking solution (1x final concentration), incubate for 1 h at RT, and wash once with PBS. Keep 20 µL/well of PBS after washing.
  6. For primary antibody (see Table of Materials) staining, prepare a 2x primary staining buffer (Table 3).
  7. Add 20 µL/well of 2x primary staining buffer (1x final concentration) and incubate overnight at 4 °C. The next morning on Day 7, wash three times with PBS. Leave 20 µL/well of PBS after washing.
  8. For secondary antibody (see Table of Materials) staining, prepare a 2x secondary staining buffer (Table 4).
  9. Add 20 µL/well of 2x secondary staining buffer (1x final concentration), incubate for 2 h at RT away from light, and wash three times with PBS. Leave 100 µL PBS/well after the last wash.
    1. Add aluminum sealing on the plate to minimize evaporation. Alternatively, cover the plate using plastic film and aluminum foil. Proceed to image acquisition, or store the plate at 4 °C.
      ​NOTE: The protocol can be paused here for up to one week. If background fluorescence is observed, consider increasing the blocking time. If the staining is insufficient, try increasing the primary antibody concentration or incubation time.

6. Imaging of fluorescently stained neurons (Day 7)

  1. Acquire images of the plated, cultured, and stained neurons on Day 7. Ideally, use an automated confocal fluorescence microscope (see Table of Materials). Alternatively, acquire images manually.
  2. Acquire the Hoechst, TH, α-synuclein, and MAP2 channels using 405 nm, 488 nm, 561 nm, and 647 nm lasers, respectively (Figure 2).
    NOTE: To generate sufficient amount of detailed data for phenotypic profiling, use a 40x objective and acquire 16 fields/well using Z-stacks consisting of 3 Z-slices separated by 2 µm. In case there are pipetting-related damages in the neuronal carpet, try to avoid imaging these areas.
  3. Depending on the microscope and camera, adjust the exposure times and excitation intensities for each of the four fluorescent channels separately to obtain an optimal dynamic range of the fluorescent intensities.
    ​NOTE: Imaging software often provides a histogram to determine the ideal exposure time. If the histogram is shifted too much to the left in the low signal range, then the exposure time is too short or the excitation intensity is too low. If there is a sharp cliff at the maximum signal level on the right, then the signal value is saturated. In this case, reduce the excitation intensity or shorten the exposure time.
  4. Store images in a loss-free and open format such as .tif.

7. Image processing (Day 8)

  1. Image segmentation and phenotypic feature extraction are required for the creation of quantitative phenotypic profiles. Use the PhenoLink software for image segmentation and feature extraction (Table of Materials). Instructions for installing PhenoLink can be found in the GitHub repository (https://github.com/Ksilink/PhenoLink).
    NOTE: Image segmentation is used to identify and separate different objects or regions in an image, while phenotypic feature extraction is used to analyze and extract relevant information from those regions. Several alternative software solutions, such as CellProfiler10, ImageJ/FIJI11, Napari12, or the Knime Analytics Platform13 are available to extract quantitative information from multichannel fluorescence images.
  2. Perform image segmentation on illumination-corrected raw images. Determine the respective fluorescent channel intensity thresholds empirically per plate so that the background signal is minimal, and the desired segmented signal corresponds to the signal in the raw image. Plates processed and stained on the same day typically require comparable channel intensity thresholds for segmentation.
  3. Define the nucleus size and intensity to separate living from dead cells. When using 40x images, keep all other default parameters and run the software. One hundred twenty-six quantitative image features will be calculated per well (Supplementary Table 1).
  4. Use the resulting tabular quantitative data to construct phenotypic profiles and compare phenotypic profiles from different cell lines or treatment conditions. Each row corresponds to a biological condition (well) and each column corresponds to a determined phenotypic feature.
    ​NOTE: We provide an example output file together with the data analysis pipeline to illustrate its use (see Table of Materials). Additionally, Figure 3 shows the composition of a phenotypic profile.

8. Phenotypic profile generation and visualization (Day 8)

  1. If you do not have Python and Jupyter installed on your computer, install the Anaconda Distribution and open the Jupyter software. Download the provided Jupyter notebook and all other provided files and save them in the same directory (see Table of Materials). Open the Jupyter notebook file using the Jupyter software.
    NOTE: Anaconda is a free and open-source platform for programming languages such as Python. This platform comes with the Python interpreter Jupyter which can execute the provided Jupyter notebook to create and analyze phenotypic profiles (https://github.com/Ksilink/Notebooks/tree/main/Neuro/DopaNeuronProfiling).
  2. Execute the Jupyter notebook cell by cell using the Jupyter software. The provided sample data .fth and requirements .txt files need to be located in the same directory as the Jupyter notebook. Each Jupyter notebook cell is annotated to explain its functionality.
    NOTE: It is crucial to use the Jupyter notebook in the correct order starting with data loading and scaling and to proceed cell by cell to the end. All data and graphics output will be stored in a newly created folder in the Jupyter notebook source directory. Figure 4 depicts the workflow and the workflow output.

Representative Results

Phenotypic profiling in mDA neurons is an efficient way to quantify multiple aspects of cellular biology and their changes during the experimental modulation. To exemplify this methodology, this study made use of cryopreserved LRRK2 G2019S and healthy donor mDA neurons. These neurons have been differentiated for approximately 37 days, are post-mitotic and express neuronal markers (TUBB3 and MAP2) and dopaminergic neuron markers, including tyrosine hydroxylase (TH) in combination with FOXA2, while the glial marker Glial Fibrillary Acidic Protein (GFAP) is absent14. Following the described protocol, both cell lines were cultured for 6 days and treated with 0.1 µM PFE-360, a LRRK2 kinase inhibitor. The neurons were stained using the nuclear stain Hoechst, and antibodies against α-synuclein, TH, and MAP2 (Figure 2).

Next, images were segmented, and phenotypic features were extracted. We determined 126 quantitative features that can be aggregated into well-based phenotypic profiles (Figure 3A,B). Each feature and its value per the experimental condition can be accessed. Some features showed changes upon compound treatment. For example, the α-synuclein fluorescence intensity in TH-positive cells decreased upon PFE-360 treatment (Figure 3C, left panel). Other features presented only differences between the tested cell lines, but not upon compound treatment. This was, for example, the case for the MAP2 neurite network length or the ratio of TH-positive neurons (Figure 3C, middle & right panel). It is essential to consider the complete phenotypic profile to analyze the phenotypic variations in different cell lines or compound treatments in a less selective and comprehensive manner.

During the image analysis step, all 126 features are always calculated. Likewise, during data analysis, all features are considered, but the machine learning algorithm assigns weights to individual features to separate the biological classes. The data analysis workflow starts with data loading and feature scaling (Figure 4A). Scaling is important for machine learning because it helps normalize the data and ensures that each feature is on a similar scale. This can help improve the performance of machine learning algorithms by making them less sensitive to the scale of the input features. In addition, scaling can help improve the interpretability of machine learning models by making it easier to compare the relative importance of different features. In the next step, clustering analysis is performed (Figure 4B). Clustering can be useful for exploring the structure of high-dimensional datasets and identifying patterns in the data that might not be immediately apparent from looking at individual features. Hierarchical clustering based on the Cosine distance between well-based phenotypic profiles showed strong differences between cell lines, but less for drug treatment. Data from PFE-360 treated wells clustered within the DMSO-treated control, indicating no strong differences using this comparison metric. Next to clustering, dimension reduction approaches are also useful tools to visualize the similarities and differences of multidimensional phenotypic profiling data. Here we made use of Pairwise Controlled Manifold Approximation (PaCMAP)15 (Figure 4C). Similar to the previous Cosine distance-based approach, PaCMAP showed mainly differences between the two cell lines and to a lesser extent, between PFE-360 or DMSO control treated wells. Both Cosine distance clustering and PaCMAP are unsupervised methods and are unlikely to pick up small differences that are only present in selected phenotypic features, for example, because a compound changes only a few phenotypes (i.e., neurite-related features only). To address this limitation of phenotypic profile analysis, we performed machine learning-driven supervised classification. Specifically, we used the Light gradient-boosting machine (LightGBM) (Figure 4D). LightGBM is a supervised machine learning algorithm that uses decision tree algorithms to create a model that can be used for ranking or classification16. LightGBM has been designed to be faster and more efficient than traditional tree-based algorithms such as the Random forest algorithm. The algorithm was trained with phenotypic profile data from one plate and tested the trained model on data from a second independent plate. The LightGBM model had an overall accuracy of 85% and correctly predicted the experimental category (cell line or compound) of most wells. The accuracy for cell line prediction was higher than for compound prediction, but also 60% of compound-treated wells were predicted correctly, which is superior to classical unsupervised methods. LightGBM permits access to the importance of the respective phenotypic features for the classification of the four classes (Figure 4D). Important phenotypic features that distinguish the cell lines and drug treatments are, for example, related to the cellular surface area or the cellular intensities of the MAP2 and TH stainings. The surface of the TH and α-synuclein double positive cytoplasm was the most important feature that distinguished cell lines and compound treatments, followed by the ratio of dead cells. We provide a Jupyter notebook that performs data plotting and all unsupervised and supervised analysis methods described here (see Table of Materials). The obtained results illustrate the potential of phenotypic profiling to distinguish cell lines and compound treatment effects in human mDA neurons.

Figure 2
Figure 2: Immunostaining of human iPSC-derived mDA neurons. Representative images of all acquired fluorescent channels are shown. Healthy donor or LRRK2 G2019S mutation-carrying mDA neurons were either treated with DMSO or with 0.1 µM of the LRRK2 kinase inhibitor PFE-360. Treatment was performed on Day 3 and cells were fixed on Day 6 as described in the protocol. Scale bars: 20 µm. Please click here to view a larger version of this figure.

Figure 3
Figure 3: Creation of a phenotypic profile from individual phenotypic features. (A) Selected phenotypic features that can be extracted from the individual fluorescence channels are shown. (B) Phenotypic features can be aggregated into a phenotypic profile. Multiple phenotypic profiles can be generated across different experimental conditions present on the 384-well plate. (C) Examples of phenotypic features and their corresponding values per experimental condition. Each data point corresponds to a measurement from one well. Welch's unequal variances t-test was used for significance testing. Statistical significance is presented as * = p < 0.05, ** = p < 0.01, *** = p < 0.001, **** = p < 0.0001, and not significant (ns = p > 0.05). Please click here to view a larger version of this figure.

Figure 4
Figure 4: mDA neuron phenotypic profiles contain quantitative information and can be used to classify phenotypes. (A) Schematic overview of the data analysis workflow. (B) Aggregated phenotypic profiles of control- and drug-treated mDA neurons. (C) Pairwise Controlled Manifold Approximation (PaCMAP) unsupervised dimension reduction of phenotypic profile data. (D) Light gradient-boosting machine (LightGBM) supervised classification of phenotypic profile data. The classification algorithm was trained on phenotypic profile data from one plate and was applied to predict experimental classes in a second plate. Left panel: The confusion matrix shows the relationship between the four true data classes and the four predicted classes by the model. Overall, the model predicts the data class correctly in 85% of cases. Right panel: The 10 most important phenotypic features for the LightGBM classifier. Please click here to view a larger version of this figure.

Reagents For 100 mL
iCell Base Medium 1 100 mL
iCell Neural Supplement B 2 mL
iCell Nervous System Supplement 1 mL

Table 1: Composition of Complete Maintenance Media.

Reagent 2x solution Final concentration For 100 mL
PBS 1x 1 1 78 mL
Triton 10% 0.20% 0.10% 2 mL
FBS stock solution 20% 10% 20 mL

Table 2: Composition of 2x blocking solution.

Reagent 2x concentration Final concentration For 100 mL
PBS 1x 1 1 87.36 mL
Triton 10% 0.20% 0.10% 2 mL
FBS stock solution 10% 5% 10 mL
Anti-TH 1/500 1/1000 0.2 mL
Anti-α-synuclein 1/250 1/500 0.4 mL
Anti-MAP2 1/2500 1/5000 0.04 mL

Table 3: Composition of primary staining buffer.

Reagent 2x concentration Final concentration For 100 mL
PBS 1x 1 1 86.7mL
Triton 10% 0.20% 0.10% 2 mL
FBS stock solution 10% 5% 10 mL
Anti-mouse A488 1/500 1/1000 0.2 mL
Anti-rabbit A555 1/500 1/1000 0.2 mL
Anti-chicken A647 1/125 1/250 0.8 mL
Hoechst 1/1000 1/2000 0.1 mL

Table 4: Composition of 2x secondary staining buffer.

Supplementary Table 1: Overview of all extracted phenotypic features. Please click here to download this File.

Discussion

Phenotypic profiling is a technique to measure a large number of phenotypes in cells by applying fluorescent stainings, microscopy, and image analysis3. Phenotypic profiles can be obtained and compared across cell lines or other experimental conditions to understand complex changes in cellular biology that might go unnoticed when using a single readout. Here we describe the application of phenotypic profiling to human iPSC-derived mDA neurons, a cell type frequently used to model PD cellular biology17,18,19. Phenotypic profiling in mDA neurons has several advantages over previously used profiling approaches that use generic fluorescent stainings4, non-neuronal cell types5,6 or are not scalable7,8. The method presented here enables phenotypic profiling in physiologically relevant post-mitotic mDA neurons. Secondly, the use of iPSC-derived cryopreserved mDA neurons significantly decreases batch-to-batch differentiation variability. Thirdly, by making use of a well-defined experimental design, automated liquid handling and automated microscopy, technical variability can be further reduced and makes the protocol highly scalable and opens the possibility to use mDA neurons for phenotypic screening campaigns. Lastly, supervised classification gives users the possibility to group and understand the key features of phenotypic profiles and therefore might help to uncover new biology.

Phenotypic profiling allows the exploration of individual features to develop follow-up hypotheses leading to follow-up mechanistic studies. For example, we showed that LRRK2 G2019S mDA neurons differ from control mDA neurons based on their α-synuclein content, MAP2 neurite length, and the ratio of TH-positive cells (Figure 3C). Compound treatment with the LRRK2 kinase inhibitor PFE-360, however, only alters α-synuclein content and has no effect on MAP2 neurite length or the ratio of TH-positive cells. A desirable chemical compound should rescue an ensemble of phenotypes. A phenotypic profile contains the required information and can be explored using clustering or dimensionality reduction techniques, which can help visualize complex feature interactions in 2-dimensional plots. Cosine distance-based clustering allows the accurate separation of both cell lines (Figure 4B). Dimension reduction using PaCMAP further illustrates how both cell lines form distinct clusters, and that PFE-360 treatment leads to distinguishable, but still similar overall phenotypes, likely due to the impact on only a few measured features such as α-synuclein content (Figure 4C). By contrast, supervised machine learning can help predict profiles of interest based on their features. The LightGBM model trained on the data accurately predicted the healthy donor and LRRK2-mutated mDA neurons in the test data. The identification of PFE-360-treated neurons was less accurate, presumably because chemical compound effects on phenotypes are weaker than genetic effects (Figure 4C). The surface of TH and α-synuclein double positive cytoplasm was the most important feature that distinguished cell lines and compound treatments, followed by the ratio of dead cells. Several other top features were related to the cellular surface area. Therefore, cell size seems to be an overall distinguishing feature between healthy control and LRRK2-mutated mDA neurons (Figure 4D). This approach therefore demonstrates how machine learning can identify the most defining phenotypic features in a complex data set, which can then be used to develop new hypotheses and test those hypotheses in secondary assays.

CellPainting has become a popular approach to create phenotypic profiles and uses a standardized set of fluorescent probes and a defined protocol3,4,20,21,22,23. It was decided here to use a more mDA neuron-specific staining panel consisting of the Hoechst nuclear stain and antibodies against α-synuclein, TH, and MAP2. Other fluorescent stainings using a lysosome-associated LAMP1 antibody or mitochondria-targeting dyes TMRM or MitoTracker have been applied by us in the past and focus on more specific aspects of PD cellular biology9. Standard light microscopy is limited in the sense that only four fluorescent wavelengths can be resolved. Adding lysosomal or mitochondrial stainings to the current staining panel is therefore, not easily possible. Depending on the biological question, stainings could be exchanged. Alternatively, two biological structures could be stained using the same wavelength under the condition that their morphology is distinguishable and that they are localized in different cell compartments.

To increase the screening compatibility of the protocol, it was designed to require a minimum number of pipetting steps and a short culture duration. Critical for the method are all liquid handling steps since they can impact the coating or result in the detachment of neurons. As indicated in the protocol, it is recommended that a residual amount of medium always remains in the well. It is also critical to handle the mDA neurons with care since they are a very fragile cell type. Perform thawing exactly as indicated to prevent excessive cell death due to osmotic rupture of the cell membrane. The seeding density was optimized to generate sufficient data per well while preventing excessive overlapping structures, such as neurites or nuclei in the images. Phenotypic profiles are very sensitive to positional effects in the plate2,4,23. As indicated in the protocol, do not use edge wells. Additionally, using at least five technical replicates per experimental condition is recommended when planning an experiment. Ideally, distribute the replicates randomly over the plate.

As with any method, neuronal phenotypic profiling has limitations. Phenotypic profiling datasets can be very large, especially when calculated for single cells. Although having more phenotypic features can be advantageous, such as revealing a previously unknown mechanism or ensuring assay system stability, it can also introduce unwanted noise and be more challenging to interpret than carefully selected individual features. For example, model overfitting or spurious correlations are challenges that occur more frequently in large datasets4,24. Phenotypic profiling is therefore, not intended to replace hypothesis-driven experimental design, but rather to serve as a starting point for new hypotheses that can then be tested. PD is a neurodegenerative disease and often manifests only late in life. Studying PD-linked disease biology in iPSC-derived neurons can therefore be a limitation, especially when the focus is on classical late-stage hallmarks of PD, such as α-synuclein aggregation17,25,26. On the contrary, due to the relatively late onset of PD, the pre-symptomatic phase is estimated to be long. Significant pathologies might therefore, already be detectable on a cellular basis in iPSC mDA neuronal models, while on a systemic level, the brain is able to compensate for neuronal and functional loss for many years27,28.

In the future, this protocol can be adapted to other iPSC-derived neuron types, such as cortical or motor neurons, by replacing mDA neuron-relevant stainings with stainings focusing on, for example, synaptic biology or intracellular aggregates. Cortical neurons could, for example, be characterized using pan-neurite staining against β-tubulin III and pre- and post-synaptic proteins such as Synapsin1 and Homer, for which high-quality antibodies have been described29. Motor neurons could be phenotyped using antibodies against Choline acetyltransferase (ChAT), TAR DNA-binding protein 43 (TDP-43) and RNA granule markers30. In summary, it is anticipated that the presented protocol to create neuronal phenotypic profiles will be useful for the research community to explore the effects of chemical or genetic perturbations on a wide range of neuronal phenotypes.

Declarações

The authors have nothing to disclose.

Acknowledgements

The authors would like to thank all colleagues at Ksilink for their valuable help and discussions that lead to the design of the presented protocol.

Materials

Anti- chicken – Alexa 647 Jackson ImmunoRearch 703-605-155 Immunofluorescence
Anaconda https://www.anaconda.com/download
Anti-Map2 Novus NB300-213 Immunofluorescence
Anti-mouse – Alexa 488 Thermo Fisher A11001 Immunofluorescence
Anti-rabbit – Alexa 555 Thermo Fisher A21429 Immunofluorescence
Anti-Tyrosine Hydroxylase Merck T2928 Immunofluorescence
Anti-α-synuclein Abcam 138501 Immunofluorescence
Bravo Automated Liquid Handling Platform with 384ST head Agilent If no liquid handler is available, the use of an electronic multichannel pipette is recommended.
Confocal microscope  Yokogawa CV7000 The use of an automated confocal fluorescence microscope is recommended to ensure image quality consistency.
Countess Automated cell counter Invitrogen Cell counting before seeding. Can also be done using a manual counting chamber.
DPBS +/+ Gibco 14040-133 Buffer for washing
EL406 Washer Dispenser  BioTek (Agilent)  If no liquid handler is available, the use of an electronic multichannel pipette is recommended.
Formaldehyde Solution (PFA 16 %) Euromedex EM-15710-S Fixation before staining
Hoechst 33342 Invitrogen H3570 Nuclear staining
iCell Base Medium 1 Fujifilm M1010 Base medium for neurons
iCell DPN, Donor#01279, Phenotype AHN, lot#106339, 1M Fujifilm C1087 Apparently healthy donor
iCell DPN, Donor#11299, Phenotype LRRK2 G2019S, phenotype PD lot#106139 Fujifilm C1149 Donor carrying LRRK2 G2019S mutation 
iCell Nervous System Supplement Fujifilm M1031 Supplement for base medium
iCell Neural Supplement B Fujifilm M1029 Supplement for base medium
Jupyter Python Notebook In-house development https://github.com/Ksilink/Notebooks/tree/main/Neuro/DopaNeuronProfiling Notebook to perform phenotypic profile visualization and classification from raw data.
Laminin Biolamina LN521 Plate coating
PFE-360 MedChemExpress HY-120085 LRRK2 kinase inhibitor
PhenoLink In-house development https://github.com/Ksilink/PhenoLink Software for image analysis
PhenoPlate 384w, PDL coated Perkin Elmer 6057500 Pre-coated plate for cell culture and imaging. This plate allows imaging of all wells using all objectives of the Yokogawa CV7000 microscope.
Storage plates Abgene 120 µL Thermo Scientific AB-0781 Necessary for compound dispensing using the Vprep pipetting system. If not available, the use of an electronic multichannel pipette is recommended.
Triton Sigma T9284 Permeabilization before lysis
Trypan Blue Sigma T8154-20ML Determination of living cells
Vprep Pipetting System  Agilent Medium change and compound dispensing. Alternatively, an electronic multichannel pipette can be used.

Referências

  1. Panicker, N., Ge, P., Dawson, V. L., Dawson, T. M. The cell biology of Parkinson’s disease. The Journal of Cell Biology. 220 (4), 202012095 (2021).
  2. Caicedo, J. C., et al. Data-analysis strategies for image-based cell profiling. Nature Methods. 14 (9), 849-863 (2017).
  3. Chandrasekaran, S. N., Ceulemans, H., Boyd, J. D., Carpenter, A. E. Image-based profiling for drug discovery: due for a machine-learning upgrade. Nature Reviews Drug Discovery. 20 (2), 145-159 (2021).
  4. Bray, M. -. A., et al. Cell Painting, a high-content image-based assay for morphological profiling using multiplexed fluorescent dyes. Nature Protocols. 11 (9), 1757-1774 (2016).
  5. Schiff, L., et al. Integrating deep learning and unbiased automated high-content screening to identify complex disease signatures in human fibroblasts. Nature Communications. 13 (1), 1590 (2022).
  6. Ziegler, S., Sievers, S., Waldmann, H. Morphological profiling of small molecules. Cell Chemical Biology. 28 (3), 300-319 (2021).
  7. Cobb, M. M., Ravisankar, A., Skibinski, G., Finkbeiner, S. iPS cells in the study of PD molecular pathogenesis. Cell and Tissue Research. 373 (1), 61-77 (2018).
  8. Elitt, M. S., Barbar, L., Tesar, P. J. Drug screening for human genetic diseases using iPSC models. Human Molecular Genetics. 27 (R2), 89-98 (2018).
  9. Vuidel, A., et al. High-content phenotyping of Parkinson’s disease patient stem cell-derived midbrain dopaminergic neurons using machine learning classification. Stem Cell Reports. 17 (10), 2349-2364 (2022).
  10. Stirling, D. R., Swain-Bowden, M. J., Lucas, A. M., Carpenter, A. E., Cimini, B. A., Goodman, A. CellProfiler 4: improvements in speed, utility and usability. BMC Bioinformatics. 22 (1), 433 (2021).
  11. Schindelin, J., et al. Fiji: an open-source platform for biological-image analysis. Nature Methods. 9 (7), 676-682 (2012).
  12. Sofroniew, N., et al. . napari: a multi-dimensional image viewer for Python. , (2022).
  13. Berthold, M. R., et al. KNIME: The Konstanz Information Miner. Data Analysis, Machine Learning and Applications. , 319-326 (2008).
  14. Fathi, A., et al. Diverging Parkinson’s Disease Pathology between patient-derived GBAN370S, LRRK2G2019S and engineered SNCAA53T iPSC-derived Dopaminergic Neurons. bioRxiv. , (2023).
  15. Wang, Y., Huang, H., Rudin, C., Shaposhnik, Y. Understanding How Dimension Reduction Tools Work: An Empirical Approach to Deciphering t-SNE, UMAP, TriMap, and PaCMAP for Data Visualization. Journal of Machine Learning Research. 22 (201), 1-73 (2021).
  16. Ke, G., et al. LightGBM: A highly efficient gradient boosting decision tree. Advances in Neural Information Processing Systems. 30, (2017).
  17. Avazzadeh, S., Baena, J. M., Keighron, C., Feller-Sanchez, Y., Quinlan, L. R. Modelling Parkinson’s Disease: iPSCs towards Better Understanding of Human Pathology. Brain Sciences. 11 (3), 373 (2021).
  18. Sánchez-Danés, A., et al. Disease-specific phenotypes in dopamine neurons from human iPS-based models of genetic and sporadic Parkinson’s disease. EMBO Molecular Medicine. 4 (5), 380-395 (2012).
  19. Oosterveen, T., et al. Pluripotent stem cell derived dopaminergic subpopulations model the selective neuron degeneration in Parkinson’s disease. Stem Cell Reports. 16 (11), 2718-2735 (2021).
  20. Hughes, R. E., et al. Multiparametric high-content cell painting identifies copper ionophores as selective modulators of esophageal cancer phenotypes. ACS Chemical Biology. 17 (7), 1876-1889 (2022).
  21. Akbarzadeh, M., et al. Morphological profiling by means of the Cell Painting assay enables identification of tubulin-targeting compounds. Cell Chemical Biology. 29 (6), 1053-1064 (2022).
  22. Schiff, L., et al. Integrating deep learning and unbiased automated high-content screening to identify complex disease signatures in human fibroblasts. Nature Communications. 13 (1), 1590 (2022).
  23. Way, G. P., et al. Morphology and gene expression profiling provide complementary information for mapping cell state. Cell Systems. 13 (11), 911-923 (2022).
  24. Feng, Y., Mitchison, T. J., Bender, A., Young, D. W., Tallarico, J. A. Multi-parameter phenotypic profiling: using cellular effects to characterize small-molecule compounds. Nature Reviews Drug Discovery. 8 (7), 567-578 (2009).
  25. Antonov, S. A., Novosadova, E. V. Current state-of-the-art and unresolved problems in using human induced pluripotent stem cell-derived dopamine neurons for parkinson’s disease drug development. International Journal of Molecular Sciences. 22 (7), 3381 (2021).
  26. Miller, J. D., et al. Human iPSC-based modeling of late-onset disease via progerin-induced aging. Cell Stem Cell. 13 (6), 691-705 (2013).
  27. Bezard, E., Gross, C. E., Brotchie, J. M. Presymptomatic compensation in Parkinson’s disease is not dopamine-mediated. Trends in Neurosciences. 26 (4), 215-221 (2003).
  28. Wu, Y., Le, W., Jankovic, J. Preclinical Biomarkers of parkinson disease. Archives of Neurology. 68 (1), 22-30 (2011).
  29. Verstraelen, P., et al. Systematic quantification of synapses in primary neuronal culture. iScience. 23 (9), 101542 (2020).
  30. Liu-Yesucevitz, L., et al. ALS-Linked mutations enlarge TDP-43-enriched neuronal RNA granules in the dendritic arbor. The Journal of Neuroscience. 34 (12), 4167-4174 (2014).

Play Video

Citar este artigo
Weiss, A., Sommer, P., Wilbertz, J. H. Phenotypic Profiling of Human Stem Cell-Derived Midbrain Dopaminergic Neurons. J. Vis. Exp. (197), e65570, doi:10.3791/65570 (2023).

View Video