Due to its multi-day radioactive half-life and favorable decay properties, the positron-emitting radiometal 89Zr is extremely well-suited for use in antibody-based radiopharmaceuticals for PET imaging. In this protocol, the bioconjugation, radiosynthesis, and preclinical application of 89Zr-labeled antibodies will be described.
The exceptional affinity, specificity, and selectivity of antibodies make them extraordinarily attractive vectors for tumor-targeted PET radiopharmaceuticals. Due to their multi-day biological half-life, antibodies must be labeled with positron-emitting radionuclides with relatively long physical decay half-lives. Traditionally, the positron-emitting isotopes 124I (t1/2 = 4.18 d), 86Y (t1/2 = 14.7 hr), and 64Cu (t1/2 = 12.7 hr) have been used to label antibodies for PET imaging. More recently, however, the field has witnessed a dramatic increase in the use of the positron-emitting radiometal 89Zr in antibody-based PET imaging agents. 89Zr is a nearly ideal radioisotope for PET imaging with immunoconjugates, as it possesses a physical half-life (t1/2 = 78.4 hr) that is compatible with the in vivo pharmacokinetics of antibodies and emits a relatively low energy positron that produces high resolution images. Furthermore, antibodies can be straightforwardly labeled with 89Zr using the siderophore-derived chelator desferrioxamine (DFO). In this protocol, the prostate-specific membrane antigen targeting antibody J591 will be used as a model system to illustrate (1) the bioconjugation of the bifunctional chelator DFO-isothiocyanate to an antibody, (2) the radiosynthesis and purification of a 89Zr-DFO-mAb radioimmunoconjugate, and (3) in vivo PET imaging with an 89Zr-DFO-mAb radioimmunoconjugate in a murine model of cancer.
Due to their remarkable sensitivity, affinity, and selectivity, antibodies have long been considered promising vectors for the delivery of radioisotopes to cancer cells. However, their application in positron emission tomography (PET) imaging has been hampered by the lack of a suitable positron-emitting radioisotope for their labeling.1-3 One of the most critical considerations in the design of radioimmunoconjugates is matching the physical decay half-life of the radioisotope to the in vivo pharmacokinetics of the antibody. More specifically, antibodies often have relatively long, multi-day biological half-lives and therefore must be labeled with radioisotopes with comparable physical half-lives. For PET imaging applications, antibodies have traditionally been radiolabeled with 64Cu (t1/2 = 12.7 hr), 86Y (t1/2 = 14.7 hr), or 124I (t1/2 = 4.18 d).4,5 However, each of these radioisotopes possesses significant limitations that hamper their suitability for clinical imaging. While radioimmunoconjugates labeled with 86Y and 64Cu have proven promising in preclinical investigations, both isotopes possess physical half-lives that are too short to be effective for imaging in humans. 124I, in contrast, has a nearly ideal physical half-life for imaging with antibodies, but it is expensive and has suboptimal decay characteristics that lead to relatively low resolution clinical images. Furthermore, 124I-labeled radioimmunoconjugates can be subject to dehalogenation in vivo, a process which can lower tumor-to-background activity ratios.6,7
The drive to find a positron-emitting radioisotope to supplant 64Cu, 86Y, and 124I in radioimmunoconjugates has fueled the recent surge in research on 89Zr-labeled antibodies.8-12 The reason for the advent of 89Zr is straightforward: the radiometal possesses near-ideal chemical and physical properties for use in diagnostic PET radioimmunoconjugates.13 89Zr is produced via the 89Y(p,n)89Zr reaction on a cyclotron using a commercially available and 100% naturally abundant 89Y target.14,15 The radiometal has a positron yield of 23%, decays with a half-life of 78.4 hr, and emits positrons with the relatively low energy of 395.5 keV (Figure 1).13,16,17 It is important to note that 89Zr also emits a high energy, 909 keV γ-ray with 99% efficiency. While this emission does not interfere energetically with the emitted 511 keV photons, it does require extra consideration with regard to transport, handling, and dosimetry. Despite this caveat, these decay characteristics ultimately mean that 89Zr not only has a more favorable half-life for imaging with antibodies than 86Y and 64Cu but can also produce higher resolution images than 124I, which emits positrons with higher energies of 687 and 975 keV as well as a number of photons with energies within 100-150 keV of the 511 keV positron-created photons.13 Moreover, 89Zr is also safer to handle, less expensive to produce, and residualizes in tumors more effectively than its radioiodine counterpart.18,19 One potential limitation of 89Zr is that it does not have a therapeutic isotopologue, e.g., 86Y (PET) vs. 90Y (therapy). This precludes the construction of chemically identical, surrogate imaging agents that can be employed as dosimetric scouts for their therapeutic counterparts. That said, investigations suggest that 89Zr-labeled antibodies do have potential as imaging surrogates for 90Y- and 177Lu-labeled immunoconjugates.20,21
From a chemical standpoint, as a Group IV metal, 89Zr exists as a +4 cation in aqueous solution. The Zr4+ ion is highly charged, relatively large (effective ionic radius = 0.84 Å), and can be classified as a “hard” cation. As such, it exhibits a preference for ligands bearing up to eight hard, anionic oxygen donors. Easily the most common chelator used in 89Zr-labeled radioimmunoconjugates is desferrioxamine (DFO), a siderophore-derived, acyclic chelator bearing three hydroxamate groups. The ligand stably coordinates the Zr4+ cation quickly and cleanly at RT at biologically relevant pH levels, and the resulting Zr-DFO complex remains stable over the course of multiple days in saline, blood serum, and whole blood.22 Computational studies strongly suggest that DFO forms a hexacoordinate complex with Zr4+ in which the metal center is coordinated to the three neutral and three anionic oxygen donors of the ligand as well as two exogenous water ligands (Figure 2).23,24 The in vivo behavior of radioimmunoconjugates employing the 89Zr-DFO conjugation scaffold has generally been excellent. However, in some cases, imaging and acute biodistribution studies have revealed elevated activity levels in the bones of mice injected with 89Zr-labeled antibodies, data that suggests that the osteophilic 89Zr4+ cation is released from the chelator in vivo and subsequently mineralizes in the bone.25 Recently, a number of investigations into the development of novel 89Zr4+ chelators particularly ligands with eight oxygen donors have appeared in the literature.24,26,27 Nevertheless, at present, DFO is the most widely employed chelator in 89Zr-labeled radioimmunoconjugates by a wide margin. A variety of different bioconjugation strategies have been employed to attach DFO to antibodies, including bioorthogonal click chemistry, the reaction of thiol-reactive DFO constructs with cysteines in the antibody, and the reaction of activated ester-bearing DFO constructs with lysines in the antibody.4,28-30 Easily the most common strategy, however, has been the use of an isothiocyanate-bearing derivative of DFO, DFO-NCS (Figure 2).22 This commercially available bifunctional chelator robustly and reliably forms stable, covalent thiourea linkages with the lysines of the antibody (Figure 3).
Over the past few years, a wide variety of 89Zr-DFO-labeled radioimmunoconjugates have been reported in the literature. Preclinical investigations have been especially abundant, featuring antibodies ranging from the more well-known cetuximab, bevacizumab, and trastuzumab to more esoteric antibodies such as the CD105-targeting TRC105 and fPSA-targeting 5A10.30-36 More recently, a small number of early-phase clinical trials using 89Zr-DFO-labeled antibodies have emerged in the literature. Specifically, groups in the Netherlands have published trials employing 89Zr-DFO-cmAb U36, 89Zr-DFO-ibritumomab tiuxetan, and 89Zr-DFO-trastuzumab.21,32,37 In addition, a range of other clinical trials with 89Zr-labeled radioimmunoconjugates are currently underway, including investigations here at Memorial Sloan Kettering Cancer Center using the PSMA-targeting 89Zr-DFO-J591 for prostate cancer imaging and the HER2-targeting 89Zr-DFO-trastuzumab for breast cancer imaging.23,30 In addition, while radiolabeled antibodies remain the most common 89Zr-labeled radiopharmaceuticals, the radiometal has also increasingly been employed with other vectors, including peptides, proteins, and nanomaterials.38-43
The modularity of this 89Zr-DFO labeling methodology is a tremendous asset. The repertoire of biomarker-targeting antibodies is ever-expanding, and the interest in performing in vivo PET imaging using these constructs is growing apace. As a result, we believe that the development of more standardized practices and protocols could benefit the field. An excellent written experimental protocol for DFO-NCS conjugation and 89Zr radiolabeling has already been published by Vosjan, et al.22 We feel that the visual demonstration provided by this work could further help investigators new to these techniques. In the protocol at hand, the prostate-specific membrane antigen targeting antibody J591 will be used as a model system to illustrate (1) the bioconjugation of the bifunctional chelator DFO-isothiocyanate to an antibody, (2) the radiosynthesis and purification of the 89Zr-DFO-mAb radioimmunoconjugate, and (3) in vivo PET imaging with a 89Zr-DFO-mAb radioimmunoconjugate in a murine model of cancer.23,44,45
All of the in vivo animal experiments described were performed according to an approved protocol and under the ethical guidelines of the Memorial Sloan Kettering Cancer Center Institutional Animal Care and Use Committee (IACUC).
1. Conjugation of DFO-NCS to J591
2. Radiolabeling J591-DFO with 89Zr
CAUTION: This step of the protocol involves the handling and manipulation of radioactivity. Before performing these steps or performing any other work with radioactivity researchers should consult with their home institution’s Radiation Safety Department. All possible steps should be taken to minimize exposure to ionizing radiation.
NOTE: In the interest of proper radiochemical note-keeping, the amount of radioactivity in the sample should be measured using a dose calibrator and recorded before and after Steps 2.2-2.13 in the protocol below. This will help with the accurate determination of radiochemical yields and specific activities.
3. In Vivo PET Imaging with 89Zr-DFO-J591
CAUTION: As in Protocol Section 2, this step of the protocol involves the handling and manipulation of radioactivity. Before performing these steps researchers should consult with their home institution’s Radiation Safety Department. All possible steps should be taken to minimize exposure to ionizing radiation.
The first step in this protocol the conjugation of DFO-NCS to the antibody is typically quite robust and reliable. Generally, the purified, chelator-modified immunoconjugate can be obtained in > 90% yield, and using 3 molar equivalents of DFO-NCS in the initial conjugation reaction will yield a degree-of-labeling of the chelator of approximately 1.0-1.5 DFO/mAb. The 89Zr radiolabeling and purification steps of the procedure are likewise straightforward. At the concentrations outlined in the protocol above, radiolabeling yields of > 80% and thus specific activities of > 2.0 mCi/mg are typical after 60 min at RT. The radio-TLC chromatogram of the crude radiolabeling mixture will likely reveal some DTPA-bound 89Zr4+ that elutes at the solvent front (Figure 4A). However, after quenching the reaction with DTPA and purifying the 89Zr-DFO-mAb construct via size exclusion chromatography, the radiochemical purity of the purified, isolated 89Zr-DFO-mAb conjugate should be > 95% (Figure 4B). In the event that the radiochemical purity of the isolated 89Zr-DFO-mAb conjugate is less than 95%, the purification procedure should be repeated prior to performing any in vitro or in vivo experiments.
Moving on to the in vivo experiments, in the protocol described above, athymic nude mice bearing PSMA-expressing, LNCaP prostate cancer xenografts were employed to investigate the in vivo behavior of 89Zr-DFO-J591. Both acute biodistribution and PET imaging experiments revealed that 89Zr-DFO-J591 clearly delineates the prostate cancer xenografts with excellent image contrast and high tumor-to-background activity ratios (Figure 5). The uptake of the radioimmunoconjugate in the tumor is evident as early as 24 hr (20.9% ± 5.6% ID/g), and the activity concentration in the tumor increases to a maximum of 57.5% ± 5.3% ID/g at 96 hr post-injection. As is typical for radioimmunoconjugates, a relatively high concentration of radiotracer is present in the blood at early time points (9.1% ± 5.3% ID/g at 24 hr), followed by a slow decrease in the amount of radioactivity in the blood over the course of the experiment. The non-target tissue with the highest activity concentration was the bone, which displayed uptake values around 10% ID/g throughout the experiment, presumably as a result of the in vivo release of the osteophilic cation 89Zr4+. All other organs including heart, lung, liver, spleen, stomach, large and small intestine, kidney, and muscle displayed relatively low activity concentrations, often well below 5% ID/g. As a control, an additional cohort of mice were injected co-injected 300 µg unlabeled DFO-J591 in order to saturate the antigen and thus illustrate selective blocking. Critically, the blocking experiment lowered uptake of the radioimmunoconjugate in the tumor from 48.9% ± 9.3% ID/g to 23.5% ± 11.1% ID/g at 72 hr post-injection, clearly indicating that 89Zr-DFO-J591 selectively targets its antigen.
Figure 1. (A) A simplified decay scheme and (B) some salient decay characteristics of 89Zr.13,16,17 IT = isomeric transition; EC = electron capture. Modified and reprinted with permission from Deri, et al. Nuclear Medicine and Biology. 40, 3-14 (2013). Please click here to view a larger version of this figure.
Figure 2. (A) The structure of DFO-NCS with the coordinating oxygen atoms colored red; (B) A DFT-derived structure of the Zr-DFO coordination complex. Modified and reprinted with permission from Deri, et al. Journal of Medicinal Chemistry. 57, 4849-4860 (2014). Copyright 2014 American Chemical Society. Please click here to view a larger version of this figure.
Figure 3. Scheme of the bioconjugation and radiolabeling of 89Zr-DFO-J591. Please click here to view a larger version of this figure.
Figure 4. Representative radio-TLC chromatograms of the crude radiolabeling mixture (A) and purified product (B) of 89Zr-DFO-J591. Radio-TLCs were run on silica strips using an eluent of 50 mM DTPA, pH 5.0. Please click here to view a larger version of this figure.
Figure 5. Coronal PET images of 89Zr-DFO-J591 (11.1-12.9 MBq [300-345 μCi] injected via tail vein in 200 μl 0.9% sterile saline) in athymic nude mice bearing subcutaneous, PSMA-expressing LNCaP prostate cancer xenografts (white arrows) between 24 and 120 hr post-injection. Modified and reprinted with permission from Zeglis, et al. Bioconjugate Chemistry. 24, 1057-1067 (2013). Copyright 2013 American Chemical Society. Please click here to view a larger version of this figure.
While the construction, radiolabeling, and imaging of 89Zr-DFO-labled radioimmunoconjugates is generally a rather straightforward procedure, it is important to keep a few key considerations in mind during each step of the process. For example, perhaps the most likely cause for concern during the conjugation step of the procedure is the aggregation of the antibody during the conjugation reaction. This problem is most often a product of poor mixing of the conjugation reaction after the addition of the DFO-NCS stock solution.22 When this happens, the non-homogenous distribution of the DFO-NCS can cause excessively high levels of local reaction with the antibody, which can in turn lead to aggregation. This issue can be relatively easily circumvented by adding the DFO-NCS stock solution in small aliquots (< 5 µl), thoroughly mixing the reaction mixture after the addition of the DFO-NCS, and agitating the reaction mixture on a temperature-controlled shaker. In addition, after the conjugation and purification of the DFO-mAb construct, it is important to precisely determine the number of DFO conjugated to each mAb. The full characterization of the number of DFO chelates per antibody can be achieved using radiometric isotopic dilution experiments similar to those performed by Holland, et al. and Anderson, et al., though MALDI-TOF mass spectrometry is a viable alternative.14,23,30,51,52 During the radiolabeling step, easily the most common problem is lower-than-expected radiolabeling yields. If unexpectedly low yields occur despite assiduously following the protocol above, three different troubleshooting strategies are available: (1) incubating the radiolabeling reaction for longer amounts of time (e.g., 2-3 hr); (2) repeating the radiolabeling reaction using a higher concentration of antibody; or (3) repeating the initial DFO-NCS conjugation reaction using a higher molar excess of the bifunctional chelator.
While the DFO-NCS conjugation is facile and robust, one of its undeniable weaknesses is that it is not site-specific: DFO-NCS forms thiourea linkages with available lysines in the antibody regardless of their position. As a result, it is possible that the chelators may become appended to the antigen-binding region of the antibody, thereby adversely affecting the immunoreactivity of the 89Zr-DFO-labeled conjugate. Therefore, a fine balance must be struck in the construction of 89Zr-labeled radioimmunoconjugates: higher numbers of chelators per antibody facilitate higher specific activities, but higher degrees of labeling also increase the risk of compromising the immunoreactivity of the construct. In the end, the goal is simple: attach as many chelators as necessary without compromising immunoreactivity. After obtaining the purified 89Zr-DFO-mAb radioimmunoconjugate, it is critical to determine the in vitro immunoreactivity of the construct prior to any in vivo experimentation. To this end, we recommend using the in vitro methods published by Lindmo, et al.53,54 If the immunoreactivity of the construct is lower than 80-90%, it may be necessary to return to the conjugation reaction and append fewer DFO moieties per antibody. Alternatively, if the immunoreactivity of the purified 89Zr-DFO-mAb is high (> 90%) and higher specific activities are desired, it may be possible to attach more chelators to the antibody without decreasing immunoreactivity.
Finally, the in vivo behavior of a 89Zr-DFO-labeled antibody is, of course, highly dependent on both the identity of the antibody and the tumor model employed. In the model system presented here, the maximum uptake value in the tumor reaches approximately 60% ID/g; however, reports in the literature for maximum tumor uptake values range from as low as 15-20% ID/g to as high as 80-90% ID/g.33,44,55-57 Likewise, the amount of uptake in non-target tissues — in particular the liver and spleen — can vary widely depending on the antibody/antigen system being studied. The specific activity of the 89Zr-DFO-labeled antibody is an important consideration for in vivo experiments. Literature values for the specific activities of 89Zr-DFO-mAbs typically range from 1-6 mCi/mg (37-222 mBq/mg).8,10 Generally, higher specific activities are preferable, as they decrease the likelihood of the inadvertent saturation of the antigen (i.e., self-blocking). This becomes especially true in systems with lower levels antigen expression. Regardless of the antibody/antigen system, no in vivo investigation of a 89Zr-DFO-labeled imaging agent is complete without a demonstration of selectivity. This can be achieved via blocking experiments using large amounts of unlabeled biomolecule or the use of a cell line that does not express the antigen in question. In the procedure described herein, the former was employed, but the selectivity of 89Zr-DFO-J591 has also been demonstrated using PSMA-negative PC3 prostate cancer xenografts.23
It is important to note that despite its clear advantages, this DFO-NCS-based synthetic methodology is not perfect. As we have discussed, DFO is not an ideal chelator for 89Zr4+, and the non-site-specific nature of the conjugation reaction can prove cumbersome. To circumvent these issues, exciting efforts to develop new chelators for 89Zr4+ and site-specific radiolabeling methodologies are currently underway, yet these new technologies still need to be optimized and validated in both the laboratory and clinic.24,26,27,29,44 Ultimately, the DFO-NCS methodology for the construction of 89Zr-DFO-labeled antibodies has proven to be an extremely powerful tool for the synthesis of radioimmunoconjugates and has the potential to be used to create a wide variety of clinically useful radiopharmaceuticals.
The authors have nothing to disclose.
The authors thank Prof. Thomas Reiner, Dr. Jacob Houghton, and Dr. Serge Lyaschenko for helpful conversations.
Name of the Material/Equipment | Company | Catalog Number | Comments |
p-SCN-Bn-DFO | Macrocyclics | B-705 | Store at -80 °C |
[89Zr]Zr-oxalate | Various, including Perkin-Elmer | – | Caution: Radioactive material |
PD-10 Desalting Columns | GE Healthcare | 17-0851-01 | Store at room temperature |
Amicon Ultra-4 Centrifugal Filter Units | EMD Millipore | UFC805024 | Store at room temperature |
Silica Gel Impregnanted RadioTLC Paper | Agilent Technologies | SGI0001 | Cut into strips 0.5 cm wide |