5.1:

Conditions of Equilibrium

JoVE Core
Mechanical Engineering
A subscription to JoVE is required to view this content.  Sign in or start your free trial.
JoVE Core Mechanical Engineering
Conditions of Equilibrium

468 Views

01:28 min

September 22, 2023

Equilibrium refers to a state where a rigid body is not subjected to any translational or rotational motion. This state is achieved when the force and couple acting on a rigid body equal zero. When the system of external forces results in a net effect equivalent to zero, the rigid body is considered to be in equilibrium.

Internal forces are not considered for conditions of equilibrium because they occur in equal and opposite pairs within the body, effectively canceling each other. As a result, these internal forces do not contribute to the overall motion or change in motion of the rigid body. Equilibrium is determined by the balance of external forces and moments acting on the body, as they are responsible for causing translational or rotational motion.

The necessary and sufficient conditions for equilibrium can be determined by setting the resultant force and moment equal to zero. Additionally, the vector equations can be replaced with six scalar equations by resolving each force and moment into its rectangular components. This implies that the components of the external forces in the x, y, and z directions are balanced, and the moments of the external forces about the x, y, and z axes are also balanced. If a rigid body is in equilibrium, the system of external forces imparts no translational or rotational motion to the body.

To write the equilibrium equations for a rigid body, first, identify all the forces acting on the body and then draw the corresponding free-body diagram. Besides the forces applied to a structure, consider the reactions exerted on the structure by its supports. Correctly identifying each reaction can help solve the unknown forces and reactions.

Knowledge of equilibrium conditions is crucial in analyzing problems related to rigid bodies. By determining the unknown forces and reactions and using the necessary and sufficient conditions for equilibrium, it is possible to predict the behavior of rigid bodies.