ジャーナル
/
工学
/
Experimental Methods for Trapping Ions Using Microfabricated Surface Ion Traps
JoVE Journal
工学
This content is Free Access.
JoVE Journal 工学
Experimental Methods for Trapping Ions Using Microfabricated Surface Ion Traps

Experimental Methods for Trapping Ions Using Microfabricated Surface Ion Traps

DOI:
10.3791/56060-v

•

11:45 min

•

August 17, 2017

•

, , , ,
1ISRC/ASRI, Department of Electrical and Computer Engineering,Seoul National University, 2Quantum Tech. Lab,SK Telecom

章

  • 00:05標題
  • 01:07Overview of the Experiment
  • 02:59Experiment Set Up: Electrical Connections
  • 04:24Experiment Set Up: Alignment of the 369.5 nm Laser and the Imaging System
  • 06:59Experiment Set Up: Alignment of the 399 nm and 935 nm Lasers and the Oven Test
  • 09:16Trapping Ions
  • 10:40Results: Trapping of 174Yb+ Ions in a Microfabricated Ion-trap Chip
  • 11:12Conclusion

概要

自動翻訳

自動翻訳

This paper presents a microfabrication methodology for surface ion traps, as well as a detailed experimental procedure for trapping ytterbium ions in a room-temperature environment.

タグ

Ion TrappingMicro-fabricated Surface Ion TrapsQuantum Information ProcessingQuantum ComputingVacuum ChamberYtterbium IonsRadio Frequency ElectrodesDC VoltagesUltra-high Vacuum SystemOvenDiode LasersImaging System

Article

Embed

プレイリスト追加

Usage Statistics

関連ビデオ

Optical Trapping of Nanoparticles

Characterization of Surface Modifications by White Light Interferometry: Applications in Ion Sputtering, Laser Ablation, and Tribology Experiments

Characterization of Electrode Materials for Lithium Ion and Sodium Ion Batteries Using Synchrotron Radiation Techniques

In Situ Neutron Powder Diffraction Using Custom-made Lithium-ion Batteries

Surface Enhanced Raman Spectroscopy Detection of Biomolecules Using EBL Fabricated Nanostructured Substrates

Speciation and Bioavailability Measurements of Environmental Plutonium Using Diffusion in Thin Films

Advanced Experimental Methods for Low-temperature Magnetotransport Measurement of Novel Materials

Experimental Methods for Investigation of Shape Memory Based Elastocaloric Cooling Processes and Model Validation

Emission Spectroscopic Boundary Layer Investigation during Ablative Material Testing in Plasmatron

Subsurface Defect Localization by Structured Heating Using Laser Projected Photothermal Thermography

Read Article