Modeling Highly Repetitive Low-level Blast Exposure in Mice

Adam Crabtree; Cory McEvoy; Peter Muench; Rebecca A. Ivory; Josh Rodriguez; Mohamed Omer; Trinity Charles; James S. Meabon

doi:10.3791/66592

JoVE Journal > Neuroscience

神経科学

Modeling Highly Repetitive Low-level Blast Exposure in Mice

Published: May 24, 2024

doi:

10.3791/66592

Adam Crabtree*¹, Cory McEvoy*^1,2, Peter Muench¹, Rebecca A. Ivory^3,4,5, Josh Rodriguez⁵, Mohamed Omer⁵, Trinity Charles⁵, James S. Meabon^5,6

¹United States Army Special Operations Command, ²CU Anschutz Center for COMBAT Research, Department of Emergency Medicine,University of Colorado School of Medicine, ³University of Washington School of Nursing, ⁴University of Delaware School of Nursing, ⁵Veterans Affairs Northwest Mental Illness Research, Education, and Clinical Center (MIRECC),VA Puget Sound Health Care System, ⁶Department of Psychiatry and Behavioral Sciences,University of Washington School of Medicine

概要

Presented here are methods for producing repeated low-intensity blast exposures using mice.

Abstract

Exposure to explosive blasts is a significant risk factor for brain trauma among exposed persons. Although the effects of large blasts on the brain are well understood, the effects of smaller blasts such as those that occur during military training are less understood. This small, low-level blast exposure also varies highly according to military occupation and training tempo, with some units experiencing few exposures over the course of several years whereas others experience hundreds within a few weeks. Animal models are an important tool in identifying both the injury mechanisms and long-term clinical health risks following low-level blast exposure. Models capable of recapitulating this wide range of exposures are necessary to inform acute and chronic injury outcomes across these disparate risk profiles.

Although outcomes following a few low-level blast exposures are easily modeled for mechanistic study, chronic exposures that occur over a career may be better modeled by blast injury paradigms with repeated exposures that occur frequently over weeks and months. Shown here are methods for modeling highly repetitive low-level blast exposure in mice. The procedures are based on established and widely used pneumatic shocktube models of open-field blast exposure that can be scaled to adjust the overpressure parameters and the number or interval of the exposures. These methods can then be used to either enable mechanistic investigations or recapitulate the routine blast exposures of clinical groups under study.

Introduction

Low-level blast (LLB) exposure occurs when individuals or structures experience relatively low magnitudes of explosive force, typically arising from small industrial accidents, controlled demolitions, or certain military training activities. In contrast, high-level blast (HLB) exposure entails exposure to intense and potentially destructive magnitudes of explosive force, commonly encountered in military combat, terrorist attacks, or large-scale accidental explosions. The primary distinction between LLB and HLB therefore lies in the intensity of the explosive events and, by extension, the ability of exposed persons to tolerate repeated exposures before experiencing physical or functional injury. In this regard, the effects of HLB exposure tend to be more obvious than the effects of LLB exposure. Because of this, persons with significant LLB exposure may be at increased risk for slowly developing injuries or deficits that go undetected until their cumulative effects become discernable.

Ongoing research aims to enhance our understanding of how the properties of blast exposure, such as intensity or repetition, may cause injury so that we can better guide prevention and medical management. In military medicine, understanding the clinical implications of blast exposure is of paramount importance, and as a result, animal models capable of informing those outcomes are needed. Although animal models have helped elucidate the effects of HLB, the effects of LLB exposures remain largely understudied. Numerous modeling studies examine the effects of blast overpressures near or above 10 pounds per square inch (psi) peak pressure¹^,²^,³^,⁴^,⁵^,⁶^,⁷^,⁸^,⁹^,¹⁰^,¹¹^,¹²^,¹³^,¹⁴^,¹⁵^,¹⁶^,¹⁷^,¹⁸, but few reports focus on pressure levels ranging from 1 to 7 psi¹⁹^,²⁰^,²¹^,²²^,²³^,²⁴^,²⁵^,²⁶^,²⁷^,²⁸^,²⁹^,³⁰^,³¹^,³²^,³³^,³⁴^,³⁵^,³⁶, which are more common in military training environments³⁷^,³⁸^,³⁹^,⁴⁰ and fall near the historical threshold of 4 psi for safe environmental exposure. Thus, broader dissemination of methods for the study of frequently used peak pressures of LLB may help catalyze rapid clinical insights for application to military medicine and force optimization.

A significant association between the occupational risk of LLB and diverse clinical diagnoses is emerging from epidemiological investigations of military LLB⁴¹^,⁴²^,⁴³^,⁴⁴. These studies support a poorly defined dose-dependent relationship, with repetitive LLB exposures demonstrating heightened risks⁴¹. This suggests that increasing cumulative blast exposure plays a crucial role in shaping clinical outcomes in military settings.

Previous animal modeling studies of LLB under 10 psi have primarily used explosives or shocktube systems to investigate the effects of exposure. Although these models typically examine the effects of one to three exposures, they have nonetheless contributed to a growing understanding of the mechanistic¹⁹^,²⁰^,³⁰^,³¹, neuropathological²⁹^,³¹^,³³, and behavioral consequences¹⁹^,²⁰^,²³^,²⁵^,³²^,³⁴, associated with low-intensity blast exposures that are typical of the military training environment.

Studies examining single LLBs generated by open-field explosives have reported evidence of subtle brain pathologies and behavioral changes frequently associated with posttraumatic stress. Woods and colleagues²⁴ were unable to detect microscopic brain injury at 2.5-5.5 psi, but they did detect quantitative changes in brain tissue glycosphingolipids by mass spectrometry. Using the same peak pressures and experimental design, Rubovitch and colleagues²⁵ observed behavioral changes following blasts that occurred with a similar lack of brain pathology when measured by light microscopy. However, in subsequent pathological investigation, unambiguous ultrastructural damage to brain myelin, mitochondria, neurons, and neurovasculature was identified by electron microscopy²⁹^,³⁰^,³¹^,³²^,³³ in 6.7 psi LLB-exposed mice. Interestingly, several LLB studies using open-field explosives with pressures of ~10 psi and less report approximately 3-8% mortality after a single exposure²⁵^,³⁶.

Similar results have been previously noted by several studies using laboratory shocktubes. In studies examining single LLBs produced by shocktubes, evidence has been found of neural cytoskeletal injury and changes in neuronal firing patterns developed after exposure to a single 1.7 psi blast²². At 4 psi, corpus callosum dysfunction was reported to accompany neurobehavioral deficits in LLB-exposed rats²³. Compared to the blast duration measured in air, Chavko and colleagues²⁷ found that the positive phase duration of the blast overpressure was significantly longer in the brains of rats exposed to 5.8 psi. Biosignatures of similar injury responses may be supported by a study in mice following 7.5 psi exposure in which Ahmed and colleagues³⁵ report detectable changes in serum levels of specific inflammatory, metabolic, vascular, and neural injury proteins up to a month after exposure. Interestingly, this study also reported 4.5% mortality at 24 h following exposure.

In studies examining three shocktube LLBs over a single 20 min exposure session, LLBs between 1.4 and 8.7 psi caused psi-dependent increases in intracranial pressure (ICP) in rats, with observable ICP changes taking longer for lower psi²⁰ and resulting in cognitive changes¹⁹^,²⁰. Using pigs, the same group determined that three 4 psi LLB exposures from a variety of military equipment were sufficient to cause histological neuropathology when the animals were placed in gunner positions simulating human use of the equipment²¹.

These studies collectively illustrate the diverse effects of LLB exposure that may occur under conditions of limited exposure and recovery periods. Repetitive LLB exposure appears to induce persistent cognitive and behavioral deficits, emphasizing the need for a nuanced understanding of the cumulative effects so we can better determine when those effects may become clinically significant; this is particularly relevant for military trainees who are exposed to high levels of repetitive LLB. To achieve this, new studies are required since the current literature does not adequately model the clinical experiences of routine military training exposures that exceed one to a few blasts over the course of a few days.

Special Operations Forces (SOF) may endure significant and highly repetitive LLB during routine exposures. A recent study estimates the representative exposure anonymized across all positions in an explosive entry breaching team to be as high as 184 cumulative peak psi over the course of one training week⁴². This is based, in part, on a conservative estimate of 6 breaching charges used per day, with an average of 4 psi peak pressure each, as measured by personnel-mounted blast gauges; it does not account for flashbangs and other devices⁴⁵. A routine training cycle may last several weeks. To facilitate the study of clinical LLB experiences, such as those of training SOF members, we present a laboratory-shocktube model of highly repetitive LLB exposure. The method, based on established pneumatic shocktube systems⁴⁶^,⁴⁷^,⁴⁸, allows for highly reproducible investigations of pressures of 2 psi and higher. The procedure is not dependent on external factors such as weather, results in no observed mortality, and is lab-based. As a result, the method enables sustained, daily repetitive LLB exposures in the same subjects for studies lasting weeks to months, facilitating the high-fidelity investigation of military training.

Protocol

All procedures were performed under protocol #1588223, approved by the Veterans Affairs Puget Sound Health Care System Institutional Animal Care and Use Committee and in accordance with the National Institutes of Health Guide for the Care and Use of Laboratory Animals.

1. Animal care

NOTE: Animal models of LLB are limited solely by their availability and the capacity of the shocktube to accommodate their size. The described shocktube herein was designed specifically for use with mice.

Use 3-4-month-old male or female C57BL/6J mice or other approved mouse strains/lines in accordance with experimental needs. Maintain the mice on a 12 h dark-light cycle in specific pathogen-free facilities with ad libitum access to food and water. Mice are typically socially housed with 4 or 5 in a cage. Maintain facility temperatures at 20-22 °C.
Bring cages containing blast and sham mice to a nearby holding area. Bring separate empty cages for transferring individual mice to and from the blast room.

2. Shocktube preparation

(Safety check) Confirm that the necessary safety checks have been completed for the specific system. Ensure that the gas supply (helium) and master power are off/disconnected.
Prepare membranes as needed for the specific number of low-intensity blasts to be conducted (Figure 1.1). Cut membrane dimensions as required for the specific shocktube used in this protocol:
1. Cut one sheet of plastic cling wrap into a 5.5" x 5.5" square to seal the spool, allowing it to pressurize.
2. Cut one sheet of standard 8.5" x 11" copier paper (75 g/m² weight) to 5.5" x 11"; fold the resulting sheet of paper in half to form a 5.5" x 5.5" square.
3. Obtain one sheet of 500 G mylar membrane (125 µm thickness).
  NOTE: These sheets are not ruptured or significantly deformed by standard low-intensity blasting and can be reused for the duration of a day's procedure.
Take a square of cling wrap and a square of folded paper and set them out on a flat surface (Figure 1.2). Place the folded paper on top of the cling wrap and align the two with each other as best as possible (Figure 1.3). To expedite repetitive blasts, arrange all the membrane stacks now.
Insert the mylar membrane between the driver and the spool by rolling it up into a small tube (about as big around as one's index finger; Figure 1.4,1.5). Insert it completely into the mechanism, and let go to allow it to unroll against the rubber seal that separates the driver section from the spool. Push the spool toward the driver to secure the mylar sheet in place; this will unseal the spool from the driven section of the shocktube.
Place the fingers under the top half of the cling wrap and carefully roll both the cling wrap and paper toward you, ensuring they roll up together without becoming misaligned (Figure 1.6).
Insert the membrane stack between the spool and the driven sections of the shocktube (Figure 1.7).
Allow the membrane stack to unroll so that the plastic seal is facing toward the spool and the paper is facing toward the driven section of the tube (Figure 1.8).
NOTE: This orientation will create an airtight seal so that the system can be pressurized.
Close the spool assembly (Figure 1.9,1.10). As appropriate, tighten the bolts by hand or hydraulically, securing the driver-spool-shocktube assembly so that the system can be pressurized. (Safety check; Figure 1.10)
NOTE: For hydraulic systems, ensure that the closure assembly's target pressure is reached to prevent misfires, which can require membrane replacement and slow the LLB exposure process. We use hydraulics to close our assembly at 500 psi.

3. Animal preparation

Turn on the circulating water heating pad below the anesthesia chamber, with the temperature set to 37 °C (Figure 1.11). Place an absorbent medical pad on top of the heat pad.
In the holding room, remove one mouse from its home cage and place it into an empty transfer cage. Bring the caged mouse into the blast room.
Turn the oxygen flow rate to 1.0 L/min (lpm) and the vacuum scavenge system on (Figure 1.12).
Turn the isoflurane on to 5% (to induce rapid unconsciousness) and route the flow to the rodent anesthesia chamber (Figure 1.13).
Place the mouse in the chamber to induce anesthesia (Figure 1.14).
Once the mouse is fully anesthetized and displays stable breathing for an additional 30 s, reach into the chamber and ear punch the mouse for unambiguous long-term identification of the mouse throughout the remainder of the study. Doing this step now is necessary to avoid interfering with recovery times after the blast. Then, apply sterile ophthalmic lubricant to both eyes to prevent corneal drying.
Remove the mouse from the chamber and place its nose into the nosecone (Figure 1.15). Switch the flow of anesthesia (e.g., isoflurane) from the induction chamber to the nosecone.
Use small pieces of laboratory tape to lightly restrain the mouse's limbs against the gurney (Figure 1.16).
After restraining the mouse, place a wire twist tie around each limb and twist tightly, securing the mouse to the gurney at the wrists and ankles (Figure 1.17). Place a larger twist tie around the chest, tying it very loosely such that the mouse's breathing is not restricted. This will serve as a secondary restraint mechanism in case any of the limb restraints come loose.
Lift the mouse's tail and place it under the left foot to ensure it does not get pinched when the gurney is inserted into the shocktube (Figure 1.18).

4. LLB procedure

Open the animal exposure section of the shocktube and orient the mouse so that it faces the oncoming blast wave (Figure 1.19).
Secure/suspend the gurney in the animal exposure section (Figure 1.20).
Close the door tightly for the animal exposure section, ensuring that the anesthetic flow tube is not pinched by the door (Figure 1.21).
Reduce the anesthesia to 2.5-3% isoflurane, 1 lpm for the remainder of the session.
Power the system as appropriate (Figure 1.22).
Locate and connect the supply line for the compressed helium gas (Figure 1.23,1.24).
Leave the blast room to access the blast tube control console in an adjoining room, and ensure no personnel or animals are left in the blast room.
NOTE: Hearing protection may be required by the institution or by operational conditions. Such conditions may include shocktube arrangements where the control console is located in the same open space as the shocktube.
From the console, turn on the acquisition software to record the blast event (see the green box in Figure 1.25).
NOTE: For these procedures, we collect sensor data at a 20 kilo hertz (kHz) sampling rate, which is then processed using LabView software. We recommend acquiring sensor sampling at ≥10 kHz to achieve high-quality time versus pressure curves.
Disengage any safety lock (e.g., power control keys, which are depicted by a green arrow in Figure 1.26).
Close both gas vents and passively pressurize the spool (Figure 1.27). Do not use the driver side. Continue to fill until the membrane ruptures on its own at the target peak psi as determined by the number of membrane sheets used.
Record the peak pressure, positive phase duration, and impulse at the animal location. (Figure 1.28). Turn off the fill mechanism.
Return to the shocktube, disconnect the helium feed line, and turn off the power supply to the blast control circuit (Figure 1.29).
To conduct repeated LLB exposures on the same animal, open the spool, remove the spool membrane stack, and then roll and insert another spool membrane stack (Figure 1.30, 1.31, 1.32). Flatten the membrane stack and reclose the assembly.
NOTE: To model the clinical experience of low-level blast exposures during empirically defined SOF training, we expose mice to 5-6 LLBs per day, capping daily exposures to a conservative ~20 cumulative total psi⁴⁵. Studies emphasizing mechanistic and dose-response relationships may alternatively choose to use a consistent number of LLB exposures with defined overpressure parameters per session.
After the final LLB for the current animal, remove it from the shocktube, leaving the anesthesia on (Figure 1.33).
Untie the animal while it is under anesthesia. Remove it from the anesthesia nosecone, placing it on its back onto the heated water pad (Figure 1.34).
Once the animal has been placed on the water pad, start a timer and record the amount of time until the mouse flips over onto its ventral side (i.e., its stomach) on its own (Figure 1.35). Record this time as the righting time. Once the mouse recovers, return it to the home cage and continue monitoring as needed.

5. Multiday procedures

To model routine LLB exposures from breaching charges used during SOF Close Quarter Battle training, perform repeated daily exposures on the mice 5 days a week (Monday through Friday) for a total of 15 days across 3 standard work weeks.

6. Altering peak LLB pressures

Increase peak pressure through the use of stronger membrane materials or by simply stacking additional membranes. For example, use Mylar Roll Clear 0.005 (500 G) membrane to produce ~20 psi peak pressure (when used as both driver and spool membranes) or Mylar Roll Clear 0.002 (200 G) membrane to produce ~10 psi peak pressure.
Adjust the parameters for the positive phase duration and impulse of the blast to meet experimental needs. To adjust positive phase durations and impulses, empirically determine target conditions by substituting compressed gas sources⁴⁷^,⁴⁹ or changing the driver length whenever possible. The above protocol uses helium to create a sharp peak pressure and waveform similar to an idealized Friedlander curve.

7. Tissue collection

NOTE: Tissue collection practices can be adjusted according to experimental needs.

Anesthetize the mouse via intraperitoneal injection with 210 mg/kg of pentobarbital.
Place the mouse into a mouse or rat cage with bars or a premade mesh; place the caged mouse into a fume hood.
Once the mouse is unresponsive, place it on its back on the bars on top of the cage and close its mouth around one of the bars to help it stay in place during perfusion.
Grab the skin of the stomach, pull it upwards, and use a pair of large scissors to cut a hole in the abdominal cavity, being careful not to cut any of the organs. Continue to cut farther down along the base of the ribs to allow for freer articulation of the ribcage.
Using a hemostat, approach the mouse from the side and grab the tissue directly on top of the ribcage, rolling the hemostat back to keep the base of the ribcage angled in an easily accessible position. Use a pair of forceps or a similar tool to hold the hemostat in place.
Using a small pair of surgical scissors, carefully cut the diaphragm to allow access to the heart. Use a pair of forceps to gently angle the heart such that the bottom is facing directly out of the open base of the ribcage. Work quickly so the heart will still be beating during perfusion.
If collecting blood, hold the heart with a pair of forceps and carefully pierce the right ventricle using a 3 mL syringe tipped with an 0.5" 25 G needle. Insert from the bottom of the ventricle and go in lengthwise, being careful not to pierce the opposite side of the ventricle. Gently pull on the syringe until 0.5-1.0 mL of blood has been collected or the flow stops, and then remove the syringe.
Use a pair of surgical scissors to cut a small incision in the right atrium to allow blood and perfusate to drain. Hold the heart with a pair of forceps, and carefully insert a 25 G butterfly needle into the left ventricle, inserting from the bottom. Hold the butterfly needle in place with a holding clamp or by hand.
Perfuse the animal.
1. Connect a syringe containing 50 mL of phosphate-buffered saline (PBS) to a butterfly needle and perfuse at a rate of approximately 10 mL/min. Look for blanching of the liver as a sign of proper perfusion. After the syringe is emptied, disconnect it from the butterfly needle.
2. For preparation of tissues for microscopy, replace the empty PBS syringe with a syringe containing 50 mL of 10% neutral buffered formalin (NBF) or 4% formaldehyde solution. Repeat the above steps to perfuse with formalin.
  NOTE: The perfused mouse should be observed to twitch during perfusion; this should result in full body rigor or rigidity after the procedure is completed.
Remove the butterfly needle from the heart and remove the mouse from the cage bars for tissue collection.
Remove and subdissect the target organs according to need; be careful to perform procedures on ice when fresh, unfixed materials are collected.
Flash freeze any unfixed tissues that were collected in liquid nitrogen and store them at -80 °C until used in protocols assaying protein or RNA targets.
For fixed tissues, remove to a labeled 50 mL conical tube filled with formalin (one tube per organ).

Representative Results

While investigating experimental outcomes in mice following exposures to explosive blast forces, recording and characterizing the event through pressure versus time analysis is crucial for evaluating the success of the experiment. This method, which involves measuring the dynamic changes in pressure during the blast, helps investigators understand the effects of blasts on biological systems.

In successful experiments, pressure recordings exhibit a well-defined and controlled wave pattern. The pressure rise is sharp, reaching peak values within expected times (Figure 2). The subsequent pressure decline follows a predictable curve, exemplified by the Friedlander waveform, indicating efficient dissipation of energy. In terms of injury assessment, no overt signs of injury are present in LLB experiments, even when conducting highly repetitive LLB exposure with up to six blasts occurring within 15-20 min (Figure 3). However, an analysis of righting times following repetitive LLB exposure indicates that blast mice return to consciousness faster than sham mice (Figure 4). Thus, repetitive LLB results in reproducible changes in acute neurobehavioral arousal responses after exposure.

Suboptimal experiments may display irregular pressure profiles. Instances in which peak pressures are unexpectedly depressed may indicate a premature or slow release of gas, preventing the sharp release of gas expansion down the length of the driven shocktube section to encounter the animal in the target area. Premature loss of gas pressure is often the result of improperly sealed driver or spool sections. This can result from flaws in the membrane or inadequate tightening of the driver-spool-shocktube assembly. In such cases, biological samples may exhibit reduced signs of trauma.

Data interpretation involves linking pressure-time profiles with observed biological responses. Successful experiments demonstrate that the chosen blast parameters, such as peak pressure and duration, elicit the expected or established biological responses under investigation. Correlations between specific pressure features and biological outcomes aid in establishing causal relationships. Longitudinal studies are enabled by this protocol due to the lack of observed animal loss for study time points as long as 6 months after the final LLB (Figure 5).

The range of clinical outcomes following LLB exposure is subtle and poorly understood. Repetitive exposure to LLBs has historically been considered subinjurious for both people and mice. This is supported by a quick return to normal ambulation, behavior, and physical activity following exposures at 2-5 psi. However, the lack of overwhelming acute neurosensory symptoms or behavioral changes does not preclude the existence of negative insidious effects. Because LLB-related phenotypes are subtle at best, the full range of effects is an area of active investigation and may require considerable time or repetition to provoke clinically significant outcomes.

Figure 1: Procedural steps for the shocktube model of repeated murine LLB. Following both the preparation of the shocktube (Steps 1-10) and the animal preparation stages (Steps 11-18), mice are exposed to one or more LLBs (Steps 19-32), before being removed from the tube (Step 33). Mice are then placed on their backside onto a warmed heating pad (Step 34). The amount of time it takes the animal to flip over onto their ventral side is recorded as the righting time (Step 35). Abbreviation: LLB = Low-level blast. Please click here to view a larger version of this figure.

Figure 2: Representative pressure-time curves for exposures near 4 psi. (A) Additive stacks provide linear peak pressures across the range of 2-4.5 peak psi. Representative pressure versus time (milliseconds) profiles averaged from 3-6 shocktube blasts (red) as compared to the idealized Friedlander curves (blue) for (B) 1 sheet, (C) 2 sheets, (D) 3 sheets, and (E) 4 sheets. Please click here to view a larger version of this figure.

Figure 3: Intersubject Interval. Set up and execution of a single blast requires on average 9.8 ± 1.9 min (mean ± standard error of the mean (sem)). Additional blast exposures require an additional 1.7 ± 0.4 min per event (mean ± sem). Dots represent results from individual animals. Please click here to view a larger version of this figure.

Figure 4: Daily righting times during 3 weeks of highly repetitive LLB exposures. The graph represents the sham-normalized righting times over 3 weeks of LLB exposure. LLB mice were subject to 6 daily blast exposures for a total of 90 total LLB exposures occurring over 15 days. Mean overpressure characteristics were (± sem) 3.05 ± 0.07 peak psi, 0.94 ± 0.04 positive phase duration, and 2 ± 0.1 psi * msec impulse. p-values reflect results from 2-way ANOVA. Abbreviation: LLB = Low-level blast. Please click here to view a larger version of this figure.

Figure 5: Effects of the laboratory shocktube LLB model on animal attrition following highly repetitive LLB exposures. Attrition rates for sham (N = 24) and LLB mice (N = 32) from the first LLB exposure (day 1) through all study exposures (ending day 19) and following a 6-month recovery period (day 199). There was no significant difference between the attrition rates of sham and LLB groups over the observed period. LLB mice experienced an average of 62 exposures at an average of 4.78 ± 0.01 peak psi and 3.16 ± 0.023 psi∙ms impulse. Exposures were administered to mice 5 days per week (i.e., Monday-Friday) for 3 consecutive weeks to model recently reported SOF overpressure exposures during routine breaching training⁴⁵. Abbreviation: LLB = Low-level blast; SOF = Special Operations Forces. Please click here to view a larger version of this figure.

Discussion

We cannot adequately treat what we inadequately understand, and we do not yet understand the injury mechanisms related to highly repetitive LLB exposure. Many SOF personnel report the development of health-related impairments thought to be related to highly repetitive LLB exposure within five to ten years of operational service⁵⁰^,⁵¹. Some SOF personnel develop acute traumatic brain injury (TBI)-like neurocognitive effects immediately after LLB exposure³⁹. Furthermore, clinicians report that symptoms resulting from blast exposure are frequently refractory to traditional treatments, which may drive SOF and clinicians to look to alternate treatments⁵²^,⁵³. Despite the frequent exposure of SOF to LLB and overpressure mechanisms⁴⁵, the severity and treatment resistance of the resulting symptoms, and the documented pattern of blast-related astroglial scarring⁵¹, the long-term health outcomes remain relatively unknown. Clinicians and military leadership rely on modeling research to uncover injury mechanisms and pathophysiology. These models are critical to developing policies and strategies to identify, interrupt, prevent, and treat the pathology process early.

Crucially, mouse modeling of common military LLB exposures is expected to inform health-prediction models. Clinical practice would benefit from LLB predictive models that identify who may be at greatest risk for blast-related pathology, which blast properties provoke the most serious outcomes, and how the disease process may evolve based on the chronicity, dosing, or specificity of the blast exposure. Thus, modeling repetitive LLB exposure is essential in developing hypotheses and predictions for how exposures will impact the health outcomes of SOF and other Service members. Prediction and injury mechanism models would inform diagnostics and treatment, as well as return-to-duty decisions based on symptoms and exposure.

The study of blast-induced TBI (bTBI) in mice has seen significant advancements in recent years, particularly with the development of models that predict outcomes following chronic repetitive mild bTBI in humans⁵⁴^,⁵⁵. Whereas the study of mid-to-high level blast exposure using shocktubes is well developed with hundreds of PubMed indexed articles⁴⁶^,⁵⁶^,⁵⁷^,⁵⁸, shocktube use in studies of blasts near routine military training overpressures (<6 psi peak pressure⁴⁰) is less developed, with fewer than ten articles identified in a recent PubMed search¹⁹^,²⁰^,²²^,²³^,²⁶^,²⁷^,²⁸. To facilitate the development of this understudied field, the presented model focuses on key considerations for consistent LLB overpressures in mice, post blast recovery, and monitoring while noting several distinct advantages of this model over the use of open-field explosives. Indeed, we argue that the described laboratory LLB model may enable the development of predictive models of clinical outcomes following chronic repetitive LLB.

The LLB model offers critical advantages over open-field explosive blast models, particularly in terms of animal welfare. Open-field models may result in 3-8% mortality rates²⁵^,³⁶, whereas this lab-based LLB model shows no loss. This distinction is crucial, especially when simulating the high cumulative exposures typical of military training, where virtually no trainees experience fatal outcomes from LLB exposure. The apparent absence of apnea or other causes of death, such as lethal pulmonary trauma, ensures the model's reliability and consistency, positioning it as a preferred choice for studies on the clinically relevant effects of repetitive LLB.

This protocol is specific for an "open-ended" shocktube with a three-part design, consisting of driver, spool, and driven sections. Highly repetitive LLBs may be achievable with other shocktube designs with appropriate modifications to the protocol. Open-ended shocktube designs are frequently used for the study of blast-induced neurotrauma⁴⁶^,⁴⁷^,⁴⁸. The open-ended shock tube, featuring an open exit end, allows the generated shock wave to propagate freely down the length of the tube where it encounters its target (e.g., the animal subject) before exiting the opposite end of the tube. This design facilitates the reproduction and study of relatively pure primary blast overpressures approximating the properties of blast explosions as they would occur in the open field⁴⁸. As a result, the fidelity of the empirically measured blast overpressure wave is compared with an idealized Friedlander wave; this allows the evaluation of the tube performance to produce a specific overpressure event. To model LLB exposure, we use a previously described⁴⁸, custom-built, open-ended blast tube originally designed to reproduce the effects of HLB detonations of over 200+ lbs of trinitrotoluene (TNT) at a standoff distance of ~25 feet. To enable high peak overpressures, a gas is pressurized into the driver, which is separated from the spool by a membrane, sealing the gas in the driver. The spool, in turn, is also separated from the open-ended section by another membrane. This second membrane allows the spool to be separately pressurized. The dual chamber system allows the gases in the driver to be pressurized past the membrane's normal point of rupture. This occurs because the pressurized spool acts as a buffer, supporting the membrane at the interface of the driver and the spool, thus preventing its rupture. When the shock tube operator desires to generate a shockwave at the target pressure, an electronic valve vents gas from the spool, rapidly dropping pressure in the spool and allowing the overpressurized gas in the driver section to rupture both the driver and spool membranes and rapidly expand down the length of the tube where it encounters the animal in the target zone. The key modification enabling the study of LLB in high-performance tubes of this design is that we block off the driver and only use the spool in combination with low-threshold membranes.

To ensure the reliability and reproducibility of LLB experiments, certain actions must be taken during the setup. Tightly securing the arms and legs at the wrists and ankles is crucial. This minimizes variability in bodily movement and blast exposure and prevents unintended injuries that could confound results. Additionally, rotating wrists and ankles inward helps direct the movement of the appendages toward the animal midline, reducing the risk of distal injuries that might affect subsequent motor performance assessments. The straightening of the head and spinal curvature is another essential factor in ensuring uniform blast exposure across subjects, as it helps to reduce potential differences in range of motion. Increasing the percentage of isoflurane that is used for anesthesia is recommended for protocols spanning multiple days or weeks. This adjustment helps maintain consistent anesthesia depth throughout the extended experimental duration. In our experience, an increase in 0.5% isoflurane is sufficient to maintain adequate anesthesia.

However, anesthesia delivery via nosecone may not be possible for all blast tube designs, especially for those with full enclosures that do not allow the insertion of the tubing into the driven section. In such events, injectable anesthetics may be preferable. We recommend determining how much time is required for the delivery of the repeated sequential blasts and then administering sufficient anesthetic to maintain unconsciousness throughout the procedure. Additional animal welfare checks may be necessary during the development of this modified method to ensure proper anesthesia maintenance. Furthermore, the use of injectables may render postacute response monitoring, such as the collection of righting time measures, impossible.

Ethical considerations are paramount in animal research, and this lab-based LLB model incorporates comprehensive post-blast recovery and monitoring protocols. Humane endpoints after blast exposure, including difficulty breathing, inability to right themselves, non-ambulatory status after a 2 h observation period, seizure-like movements, awkward movements, vision impairment, and evidence of internal bleeding or fractured limbs, are closely observed. Notably, LLB blast mice have not exhibited any of these conditions in our experiments. However, limb fractures can occur during HLBs, often due to operator error. Mitigating this risk involves rotating the hands and feet toward the animal midline during gurney securing. This technique prevents the blast wind from sweeping the appendages backward and breaking the associated bones.

This repetitive LLB model's advantages extend beyond ethical considerations to practical and methodological aspects. Its lab-based design eliminates the need for handling explosives, thereby enhancing safety and accessibility. The model is highly reproducible and customizable, allowing researchers to influence exposure parameters through the use of different gas types, device settings, and membrane strengths. Helium, which is chosen here for its ability to reproduce open-field explosion kinetics⁴⁹, may provide a reliable baseline⁴⁷^,⁵⁹^,⁶⁰. Adjusting peak pressure is achieved empirically by modifying the retention membrane thickness or strength, enabling fine-tuning for specific experimental requirements. Lastly, the LLB model eliminates the impact of seasonal or weather variations on data, animal exposure, and other experimental factors. This consistency ensures robust and reliable results, making this repetitive LLB model an invaluable tool for longitudinal and highly repetitive blast research.

Understanding blast-related neurotrauma requires elucidating injury mechanisms, blast intensity metrics, and threshold values. However, uncertainties surround human brain injury mechanisms in blast scenarios. Previously proposed criteria for human injury following blast exposure have relied on animal studies, yet it is challenging to directly apply these studies to humans due to incomplete scaling criteria across species⁶¹. Lung injury scaling based on animal body mass is an exception, given the presence of accepted criteria⁶²^,⁶³. Proposed scaling laws for brain effects, based on body⁶⁴^,⁶⁵ or brain mass⁶⁶, however, overlook known and unknown anatomical differences, especially concerning the protective structures inside and around the brain. Mass scaling predicts higher injury risks in smaller-bodied species, which are contradicted by studies both in birds⁶⁷^,⁶⁸^,⁶⁹ and humans⁷⁰. Developing accurate scaling laws therefore demands an empirical understanding of the relationship between external blast event intensity and internal brain effects across species. In the case of LLBs, very little is known about either single or chronic exposure in either animal models or people. As a result, the empirical studies needed to inform the development of future scaling laws at the LLB intensity range may be catalyzed by our method.

In summary, this laboratory-based shocktube model represents a significant advancement in the study of the chronic effects of LLB exposure in mice. By incorporating procedures for modeling consistent overpressures, prioritizing post-blast recovery and monitoring, and highlighting distinct advantages over alternative models, this lab-based LLB model may provide a reliable and ethical choice for advancing our understanding of injuries related to chronic LLB exposure.

開示

The authors have nothing to disclose.

Acknowledgements

JSM received funding from the United States Department of Veterans Affairs (VA) Office of Biomedical Laboratory Research & Development (JSM, I01BX004896) and the VA Northwest Mental Illness Research Education and Clinical Center, a Congressionally-mandated VA entity investigating blast-induced brain injury and comorbid post-traumatic stress. JSM reports unrelated funding from the FY22 Traumatic Brain Injury and Psychological Health Research Program Translational Research Award (W81XWH-22-TBIPHRPTRA, Award Number HT94252310755). The authors thank Andrew Shutes-David for his editorial assistance.

Materials

Adroit Thermal Recirculating Heat Pump (120 V)	Parkland Scientific	HTP-1500
Copy paper, 75 g/m² weight	Staples	897804
Disposable Absorbant Blue Pads	VWR	82020-845
Forane Inhalant Solution	MedLine	10019-360-60
Helium	Linde	UN1046
Laboratory tape (1")	VWR	89098-076
LabView software	Emerson	V 2011
Medical oxygen	Central Welding Supply	UN1072
Mylar, 0.005 thickness	Tapp Plastics	22934
Plastic cling wrap	Santa Cruz Biotechnology	sc-3687
Plastic twist ties	VWR	11215-940
Pneumatic Shocktube (with driver and spool sections; target area sized for mice, 20 kHz sampling rate pressure sensors, control and acquisition software)	BakerRisk, San Antonio, TX	custom
Reusable Heavy Duty Heating Pad (12" x 18")	Parkland Scientific	121218
Scissor-style, Rodent Ear Punch	Kent Scientific	INS750076-2
Sliding Top Chambers for Traditional Vaporizers	Kent Scientific	VetFlo-0530SM
VetFlo Isoflurane Vaporizer	Kent Scientific	VetFlo-1210S

参考文献

Dal Cengio Leonardi, A., et al. Head orientation affects the intracranial pressure response resulting from shock wave loading in the rat. J Biomech. 45 (15), 2595-2602 (2012).
Leonardi, A. D., Bir, C. A., Ritzel, D. V., VandeVord, P. J. Intracranial pressure increases during exposure to a shock wave. J Neurotrauma. 28 (1), 85-94 (2011).
Li, Y., et al. Low-level primary blast induces neuroinflammation and neurodegeneration in rats. Mil Med. 184, 265-272 (2019).
Ravula, A. R., et al. Animal model of repeated low-level blast traumatic brain injury displays acute and chronic neurobehavioral and neuropathological changes. Exp Neurol. 349, 113938 (2022).
Dickstein, D. L., et al. Brain and blood biomarkers of tauopathy and neuronal injury in humans and rats with neurobehavioral syndromes following blast exposure. Mol Psychiatry. 26 (10), 5940-5954 (2021).
Perez-Garcia, G., et al. Chronic post-traumatic stress disorder-related traits in a rat model of low-level blast exposure. Behav Brain Res. 340, 117-125 (2018).
Perez-Garcia, G., et al. Exposure to a predator scent induces chronic behavioral changes in rats previously exposed to low-level blast: implications for the relationship of blast-related TBI to PTSD. Front Neurol. 7, 176 (2016).
Perez Garcia, G., et al. Laterality and region-specific tau phosphorylation correlate with PTSD-related behavioral traits in rats exposed to repetitive low-level blast. Acta Neuropathol Commun. 9 (1), 33 (2021).
Perez Garcia, G., et al. Progressive cognitive and post-traumatic stress disorder-related behavioral traits in rats exposed to repetitive low-level blast. J Neurotrauma. 38 (14), 2030-2045 (2021).
Perez-Garcia, G., et al. PTSD-related behavioral traits in a rat model of blast-induced mTBI are reversed by the mGluR2/3 receptor antagonist BCI-838. eNeuro. 5 (1), (2018).
Gasperi, R., et al. Progressive transcriptional changes in the amygdala implicate neuroinflammation in the effects of repetitive low-level blast exposure in male rats. J Neurotrauma. 40 (5-6), 561-577 (2023).
De Gasperi, R., et al. Metabotropic glutamate receptor 2 expression is chronically elevated in male rats with post-traumatic stress disorder related behavioral traits following repetitive low-level blast exposure. J Neurotrauma. , (2023).
Gama Sosa, M. A., et al. Lack of chronic neuroinflammation in the absence of focal hemorrhage in a rat model of low-energy blast-induced TBI. Acta Neuropathol Commun. 5 (1), 80 (2017).
Gama Sosa, M. A., et al. Late chronic local inflammation, synaptic alterations, vascular remodeling and arteriovenous malformations in the brains of male rats exposed to repetitive low-level blast overpressures. Acta Neuropathol Commun. 11 (1), 81 (2023).
Gama Sosa, M. A., et al. Low-level blast exposure induces chronic vascular remodeling, perivascular astrocytic degeneration and vascular-associated neuroinflammation. Acta Neuropathol Commun. 9 (1), 167 (2021).
Hubbard, W. B., et al. Mitochondrial dysfunction after repeated mild blast traumatic brain injury is attenuated by a mild mitochondrial uncoupling prodrug. J Neurotrauma. 40 (21-22), 2396-2409 (2023).
Hubbard, W. B., Velmurugan, G. V., Brown, E. P., Sullivan, P. G. Resilience of females to acute blood-brain barrier damage and anxiety behavior following mild blast traumatic brain injury. Acta Neuropathol Commun. 10 (1), 93 (2022).
Chen, M., et al. Proteomic profiling of mouse brains exposed to blast-induced mild traumatic brain injury reveals changes in axonal proteins and phosphorylated Tau. J Alzheimers Dis. 66 (2), 751-773 (2018).
Saljo, A., Bolouri, H., Mayorga, M., Svensson, B., Hamberger, A. Low-level blast raises intracranial pressure and impairs cognitive function in rats: prophylaxis with processed cereal feed. J Neurotrauma. 27 (2), 383-389 (2010).
Saljo, A., Svensson, B., Mayorga, M., Hamberger, A., Bolouri, H. Low-level blasts raise intracranial pressure and impair cognitive function in rats. J Neurotrauma. 26 (8), 1345-1352 (2009).
Saljo, A., Arrhen, F., Bolouri, H., Mayorga, M., Hamberger, A. Neuropathology and pressure in the pig brain resulting from low-impulse noise exposure. J Neurotrauma. 25 (12), 1397-1406 (2008).
Park, E., Gottlieb, J. J., Cheung, B., Shek, P. N., Baker, A. J. A model of low-level primary blast brain trauma results in cytoskeletal proteolysis and chronic functional impairment in the absence of lung barotrauma. J Neurotrauma. 28 (3), 343-357 (2011).
Park, E., Eisen, R., Kinio, A., Baker, A. J. Electrophysiological white matter dysfunction and association with neurobehavioral deficits following low-level primary blast trauma. Neurobiol Dis. 52, 150-159 (2013).
Woods, A. S., et al. Gangliosides and ceramides change in a mouse model of blast induced traumatic brain injury. ACS Chem Neurosci. 4 (4), 594-600 (2013).
Rubovitch, V., et al. A mouse model of blast-induced mild traumatic brain injury. Exp Neurol. 232 (2), 280-289 (2011).
Perez Garcia, G., et al. Repetitive low-level blast exposure improves behavioral deficits and chronically lowers Abeta42 in an Alzheimer disease transgenic mouse model. J Neurotrauma. 38 (22), 3146-3173 (2021).
Chavko, M., Koller, W. A., Prusaczyk, W. K., McCarron, R. M. Measurement of blast wave by a miniature fiber optic pressure transducer in the rat brain. J Neurosci Methods. 159 (2), 277-281 (2007).
Chavko, M., et al. Relationship between orientation to a blast and pressure wave propagation inside the rat brain. J Neurosci Methods. 195 (1), 61-66 (2011).
Song, H., et al. Ultrastructural brain abnormalities and associated behavioral changes in mice after low-intensity blast exposure. Behav Brain Res. 347, 148-157 (2018).
Song, H., et al. Proteomic analysis and biochemical correlates of mitochondrial dysfunction after low-intensity primary blast exposure. J Neurotrauma. 36 (10), 1591-1605 (2019).
Konan, L. M., et al. Multi-focal neuronal ultrastructural abnormalities and synaptic alterations in mice after low-intensity blast exposure. J Neurotrauma. 36 (13), 2117-2128 (2019).
Chen, S., et al. Low-intensity blast induces acute glutamatergic hyperexcitability in mouse hippocampus leading to long-term learning deficits and altered expression of proteins involved in synaptic plasticity and serine protease inhibitors. Neurobiol Dis. 165, 105634 (2022).
Li, C., et al. Low-intensity open-field blast exposure effects on neurovascular unit ultrastructure in mice. Acta Neuropathol Commun. 11 (1), 144 (2023).
Siedhoff, H. R., et al. Long-term effects of low-intensity blast non-inertial brain injury on anxiety-like behaviors in mice: home-cage monitoring assessments. Neurotrauma Rep. 3 (1), 27-38 (2022).
Ahmed, F., Plantman, S., Cernak, I., Agoston, D. V. The temporal pattern of changes in serum biomarker levels reveals complex and dynamically changing pathologies after exposure to a single low-intensity blast in mice. Front Neurol. 6, 114 (2015).
Pun, P. B., et al. Low level primary blast injury in rodent brain. Front Neurol. 2, 19 (2011).
Lang, M., et al. Shooter-experienced blast overpressure in .50-caliber rifles. J Spec Oper Med. 18 (4), 87-91 (2018).
Wiri, S., et al. Significant mitigation of blast overpressure exposure during training by adjustment of body position as demonstrated with field data. Mil Med. , (2023).
Woodall, J. L. A., et al. Repetitive low-level blast exposure and neurocognitive effects in army ranger mortarmen. Mil Med. 188 (3-4), e771-e779 (2023).
Wiri, S., et al. Dynamic monitoring of service members to quantify blast exposure levels during combat training using BlackBox Biometrics Blast Gauges: explosive breaching, shoulder-fired weapons, artillery, mortars, and 0.50 caliber guns. Front Neurol. 14, 1175671 (2023).
Belding, J. N., Englert, R., Bonkowski, J., Thomsen, C. J. Occupational risk of low-level blast exposure and TBI-related medical diagnoses: a population-based epidemiological investigation (2005-2015). Int J Environ Res Public Health. 18 (24), 12925 (2021).
Belding, J. N., Kolaja, C. A., Rull, R. P., Trone, D. W. Single and repeated high-level blast, low-level blast, and new-onset self-reported health conditions in the U.S. Millennium Cohort Study: An exploratory investigation. Front Neurol. 14, 1110717 (2023).
Belding, J. N., et al. Self-reported concussion symptomology during deployment: differences as a function of injury mechanism and low-level blast exposure. J Neurotrauma. 37 (20), 2219-2226 (2020).
Belding, J. N., Khokhar, B., Englert, R. M., Fitzmaurice, S., Thomsen, C. J. The persistence of blast- versus impact-induced concussion symptomology following deployment. J Head Trauma Rehabil. 36 (6), E397-E405 (2021).
McEvoy, C. B., Crabtree, A., Powell, J. R., Meabon, J. S., Mihalik, J. P. Cumulative blast exposure estimate model for Special Operations Forces combat soldiers. J Neurotrauma. 40 (3-4), 318-325 (2023).
Long, J. B., et al. Blast overpressure in rats: recreating a battlefield injury in the laboratory. J Neurotrauma. 26 (6), 827-840 (2009).
Reneer, D. V., et al. A multi-mode shock tube for investigation of blast-induced traumatic brain injury. J Neurotrauma. 28 (1), 95-104 (2011).
Huber, B. R., et al. Blast exposure causes early and persistent aberrant phospho- and cleaved-tau expression in a murine model of mild blast-induced traumatic brain injury. J Alzheimers Dis. 37 (2), 309-323 (2013).
Reeder, E. L., et al. Effect of driver gas composition on production of scaled Friedlander waveforms in an open-ended shock tube model. Biomed Phys Eng Express. 8 (6), (2022).
Frueh, B. C., et al. 34;Operator syndrome": A unique constellation of medical and behavioral health-care needs of military special operation forces. Int J Psychiatry Med. 55 (4), 281-295 (2020).
Stewart, W., Trujillo, K. Modern warfare destroys brains: Creating awareness and educating the force on the effects of blast traumatic brain injury. Harvard Kennedy School, Belfer Center for Science and International Affairs. , 1-69 (2020).
Lipov, E., Sethi, Z., Nandra, G., Frueh, C. Efficacy of combined subanesthetic ketamine infusion and cervical sympathetic blockade as a symptomatic treatment of PTSD/TBI in a special forces patient with a 1-year follow-up: A case report. Heliyon. 9 (4), e14891 (2023).
Ivory, H. R. Stellate ganglion block as treatment for risk taking behaviors among Naval Special Warfare operators and Veterans. DNA Reporter. 48 (3), 9 (2023).
Schindler, A. G., et al. Repetitive blast mild traumatic brain injury increases ethanol sensitivity in male mice and risky drinking behavior in male combat veterans. Alcohol Clin Exp Res. 45 (5), 1051-1064 (2021).
Meabon, J. S., et al. Repetitive blast exposure in mice and combat veterans causes persistent cerebellar dysfunction. Sci Transl Med. 8 (321), 326 (2016).
Garman, R. H., et al. Blast exposure in rats with body shielding is characterized primarily by diffuse axonal injury. J Neurotrauma. 28 (6), 947-959 (2011).
Vu, P. A., et al. Transient disruption of mouse home cage activities and assessment of orexin immunoreactivity following concussive- or blast-induced brain injury. Brain Res. 1700, 138-151 (2018).
Logsdon, A. F., et al. Low-intensity blast wave model for preclinical assessment of closed-head mild traumatic brain injury in rodents. J Vis Exp. (165), (2020).
Panzer, M. B., et al. A multiscale approach to blast neurotrauma modeling: Part I – Development of novel test devices for in vivo and in vitro blast injury models. Front Neurol. 3, 46 (2012).
Kumar, R., Nedungadi, A. Using gas-driven shock tubes to produce blast wave signatures. Front Neurol. 11, 90 (2020).
Panzer, M. B., Wood, G. W., Bass, C. R. Scaling in neurotrauma: how do we apply animal experiments to people. Exp Neurol. 261, 120-126 (2014).
Bowen, I. G., Fletcher, E. R., Richmond, D. R., Hirsch, F. G., White, C. S. Biophysical mechanisms and scaling procedures applicable in assessing responses of the thorax energized by air-blast overpressures or by nonpenetrating missiles. Ann N Y Acad Sci. 152 (1), 122-146 (1968).
Bass, C. R., Rafaels, K. A., Salzar, R. S. Pulmonary injury risk assessment for short-duration blasts. J Trauma. 65 (3), 604-615 (2008).
Bass, C. R., et al. Brain injuries from blast. Ann Biomed Eng. 40 (1), 185-202 (2012).
Rafaels, K., et al. Survival risk assessment for primary blast exposures to the head. J Neurotrauma. 28 (11), 2319-2328 (2011).
Wood, G. W., et al. Scaling in blast neurotrauma. Injury Biomechanics Res: Proceedings of the 40th International Workshop. , 549-558 (2013).
Wang, L., et al. Why do woodpeckers resist head impact injury: a biomechanical investigation. PLoS One. 6 (10), e26490 (2011).
Van Wassenbergh, S., et al. Woodpeckers minimize cranial absorption of shocks. Curr Biol. 32 (14), 3189-3194 (2022).
Gibson, L. Woodpecker pecking: how woodpeckers avoid brain injury. J Zool. 270 (3), 462-465 (2006).
Jean, A., et al. An animal-to-human scaling law for blast-induced traumatic brain injury risk assessment. Proc Natl Acad Sci U S A. 111 (43), 15310-15315 (2014).

Play Video

PDF

DOI

DOWNLOAD MATERIALS LIST

記事を引用

Crabtree, A., McEvoy, C., Muench, P., Ivory, R. A., Rodriguez, J., Omer, M., Charles, T., Meabon, J. S. Modeling Highly Repetitive Low-level Blast Exposure in Mice. J. Vis. Exp. (207), e66592, doi:10.3791/66592 (2024).

Modeling Highly Repetitive Low-level Blast Exposure in Mice