概要

Combined Mechanical and Enzymatic Dissociation of Mouse Brain Hippocampal Tissue

Published: October 21, 2021
doi:

概要

This neural cell dissociation protocol is intended for samples with a low amount of starting material and yields a highly viable single-cell suspension for downstream analysis, with optional fixation and staining steps.

Abstract

This neural dissociation protocol (an adaptation of the protocol accompanying a commercial adult brain dissociation kit) optimizes tissue processing in preparation for detailed downstream analysis such as flow cytometry or single-cell sequencing. Neural dissociation can be conducted via mechanical dissociation (such as using filters, chopping techniques, or pipette trituration), enzymatic digestion, or a combination thereof. The delicate nature of neuronal cells can complicate efforts to obtain the highly viable, true single-cell suspension with minimal cellular debris that is required for single-cell analysis. The data demonstrate that this combination of automated mechanical dissociation and enzymatic digestion consistently yields a highly viable (>90%) single-cell suspension, overcoming the aforementioned difficulties. While a few of the steps require manual dexterity, these steps lessen sample handling and potential cell loss. This manuscript details each step of the process to equip other laboratories to successfully dissociate small quantities of neural tissue in preparation for downstream analysis.

Introduction

The hippocampus was first described by a Bolognese anatomist, Giulio Cesare Aranzio, in the 1500's1. In naming this newfound structure, Aranzio was likely inspired by its uncanny resemblance to the seahorse of the genus Hippocampus1. The hippocampus is involved in stress responses but is widely known for its role in learning and memory. More specifically, the hippocampus is responsible for the encoding and retrieval of declarative and spatial memory1.

The hippocampus, or hippocampus proper, is divided into the CA1 (cornu ammonis), CA2, and CA3 subfields1. Compared to the rest of the nervous system, the hippocampus has several unique defining characteristics, including its plasticity and potential for ongoing neurogenesis2. Neurogenesis is the process of the proliferation and differentiation of neural stem cells, followed by their integration into the pre-existing neuronal network. Neurogenesis is restricted to the subgranular zone of the dentate gyrus and subventricular zone of the lateral ventricles (and the olfactory bulbs)3. While neurogenesis is abundant in embryogenesis, it is a lifelong process3,4. As such, this discussion will focus on adult neurogenesis in the hippocampus.

The subventricular and subgranular zones are neurogenic niches containing ependymal and vascular cells, as well as immature and mature lineages of neural stem cells5. Microglia contribute to these niches as immune cells to regulate neurogenesis6. Neural progenitor cells are nonstem cell progenies of neural stem cells7. Three types of neural progenitors are present in the subventricular zone: radial glia-like type B cells, type C transit-amplifying progenitors, and type A neuroblasts3,8. The slowly dividing type B neural progenitor cells in the subventricular zone can differentiate into rapidly dividing type C cells8. Subsequently, type C cells differentiate into type A cells8. These neuroblasts migrate through the rostral migratory stream to the olfactory bulb before differentiating into interneurons or oligodendrocytes9. These olfactory bulb interneurons are key to olfactory short-term memory, and associative learning, whereas the oligodendrocytes myelinate axons of the corpus callosum9. The majority of adult neurogenesis occurs in the subgranular zone of the dentate gyrus, where radial type 1 and nonradial type 2 neural progenitors are found3. Most neural progenitor cells are destined to become dentate granule neurons and astrocytes10. Connected by gap junctions, astrocytes form networks to modulate plasticity, synaptic activity, and neuronal excitability5. As the primary excitatory neuron of the dentate gyrus, granule cells provide input from the entorhinal cortex to the CA3 region11.

Neural stem cell populations can be isolated using immunomagnetic or immunofluorescent isolation strategies12,13. Neural tissue is particularly difficult to dissociate; efforts to do so often result in samples with poor cell viability and/ or fail to produce the necessary single-cell suspension for downstream analysis. Neural dissociation can be conducted via mechanical dissociation (such as using filters, chopping techniques, or pipette trituration), enzymatic digestion, or a combination of techniques14,15. In a study evaluating neural dissociation methods, the viability and quality of manual mechanical dissociation by pipette trituration versus combinations of pipette trituration and digestion with various enzymes were compared15. Quality was graded based on the amount of cell clumps and DNA or subcellular debris in the prepared suspension15. Suspensions of glial tumors subjected to manual mechanical dissociation alone had significantly lower cell viability than treatments with dispase or a combination of DNase, collagenase, and hyaluronidase15. Volovitz et al. acknowledged the variation in viability and quality between the different methods and emphasized that inadequate dissociation may reduce the accuracy of downstream analysis15.

In a separate study, the authors compared over 60 different methods and combinations of dissociation of cultured neuronal cells14. These methods included eight different variations of manual mechanical dissociation by pipette trituration, a comparison of incubation with five individual enzymes at three different intervals, and various combinations of mechanical dissociation with enzymatic digestion or the combination of two enzymes14. None of the mechanical methods yielded a single-cell suspension14. Four of the single enzyme treatments, ten of the combination enzymatic treatments, and four of the combinations of mechanical dissociation with enzymatic digestion yielded a single-cell suspension14. Enzymatic digestion with TrypLE followed by Trypsin-EDTA most effectively dissociated samples14. Incidentally, samples treated with TrypLE and/or Trypsin-EDTA tended to form gelatinous clumps14. While this study was performed on cultured cells, it speaks to the shortcomings of pipette trituration or enzymatic digestion alone.

Side-by-side comparisons of manual versus automated mechanical dissociation are lacking. However, one group ran flow cytometry to compare manual and semi-automated mechanical dissociation of whole mouse brains in conjunction with commercial papain or trypsin enzymatic dissociation kits16. Processing with the dissociator more consistently yielded viable cells16. Following dissociation, the authors also isolated Prominin-1 cells, neuronal precursor cells, and microglia16. For two of the three isolated cell populations, the purity of the isolated cells was slightly higher when samples were processed with the dissociator, as compared to manually16. Reiß et al. noted that person-to-person variability in pipetting technique hinders reproducibility of viable cell population yield in tissue dissociation16. The authors concluded that automated mechanical dissociation standardizes sample processing16.

The method of dissociation outlined in this manuscript is a combination of fully automated mechanical dissociation and enzymatic digestion, using solutions accompanying a commercial adult brain dissociation kit17. Unlike standard protocols, this optimized protocol reduces sample manipulation, yields a highly viable single-cell suspension, and is intended for processing minimal amounts of starting tissue.

Protocol

Experiments were conducted in accordance with the ethical standards approved by the Institutional Animal Care and Use Committee at UAMS. 6-month-old female C57Bl6/J wild-type mice were purchased and group-housed (4 mice per cage) under a constant 12 h light/dark cycle.

1. Preparation of reagents

  1. Prepare fixable live/dead stain stock solution. Reconstitute the fluorescent stain with 20 µL of dimethyl sulfoxide (DMSO).
  2. Wrap the vial in foil, label it as "Reconstituted", and store it at -20 °C for up to six months.
  3. Prepare a 0.9% saline solution with heparin. Dilute the contents of one vial of heparin sodium (10,000 USP units per 10 mL) in 1 L of double-distilled water (ddH2O).
  4. Prepare enough for approximately 45 mL per animal and store at 4 °C for up to one week.
  5. Make 1% paraformaldehyde (PFA).
    1. In a fume hood, heat a hot plate to 50 °C. In a Microwave, heat 100 mL of ddH2O in a glass beaker to approximately 60 °C. Add a magnetic stir bar and transfer to the hot plate.
    2. In the fume hood, weigh out 1 g of PFA and add to the beaker of ddH2O. Add 0.1125 g of NaOH crystals and mix until dissolved (5-10 min).
    3. Add 0.4 g of NaPO4- monobasic and mix until dissolved (2-5 min). Vacuum filter the solution and adjust pH to 7.4 with HCl and NaOH.
    4. Cool on ice or at 4°C for 30 min before storing.
      NOTE: Aliquots of 1.5 mL can be stored at -20 °C for one year. Avoid freeze-thaw cycles. If, after thawing, the solution becomes cloudy or a precipitate has formed, the solution should not be used.
      CAUTION: Toxic, flammable. Always work with PFA under a ventilated hood wearing proper personal protective equipment.
  6. Resuspend lyophilized Enzyme A with 1 mL of Buffer A. Do not vortex the solution.
    NOTE: Enzyme A and Buffer A as well as Buffers A, Y, and Z are reagents in the commercial Adult Brain Dissociation Kit17.
  7. Divide Enzyme P into aliquots of 50 µL and resuspend Enzyme A into 10 µL aliquots. Per kit instructions, store at -20 °C for up to six months. Avoid freeze-thaw cycles.

2. Day of experiment

  1. Cool the tabletop centrifuge to 4 °C.
  2. Place aliquot(s) of PFA in the fridge for gradual thawing.
  3. Place the reconstituted live/dead stain in the dark (e.g., a drawer) to thaw at room temperature.
  4. Prepare the bovine serum albumin (BSA) Buffer. Add 0.5 g of BSA to 100 mL of 1x Dulbecco's phosphate-buffered solution without calcium and magnesium (D-PBS), pH 7.2.
  5. Add a stir bar and mix on a stir plate for 30 min. Transfer to 50 mL conical tubes and store at 4 °C.
    NOTE: Always use freshly prepared BSA buffer.
  6. Prepare live/dead stain working dilution. Add 1 µL of the reconstituted live/dead stain stock solution to 360 µL D-PBS and store it in the dark (e.g., a drawer or box) at room temperature. Prepare 50 µL of the working dilution per sample.

3. Perfusion

  1. Place the saline solution with heparin on ice.
  2. Turn on oxygen, set the flowmeter indicator ball on the small animal anesthesia vaporizer system to 1 L/min. Ensure there is adequate oxygen pressure and isoflurane.
  3. Adjust the vaporizer dial to 3.5% (for induction and maintenance).
  4. Prime the perfusion pump lines with the saline/heparin solution. Set the speed to 6 mL/min.
  5. Place the mouse in the induction chamber, turn on the breather, and wait several minutes until the mouse is unresponsive. Confirm sufficient depth of anesthesia through the absence of pedal withdrawal to noxious pinch.
  6. Place the mouse on its back on the dissection tray with its nose in the nose cone. Perform a secondary confirmation of full anesthetization through the absence of pedal withdrawal to noxious pinch. Pin all four paws to the tray.
  7. Spray the animal's abdomen with 20% ethanol.
  8. Using forceps, pinch the lower abdomen and lift the skin. Use scissors to cut through fur and skin to the bottom of the ribcage.
  9. Make two diagonal incisions from below the ribcage toward each shoulder.
  10. Carefully resect the diaphragm (avoiding the lungs and heart). Resect the ribcage to expose the heart.
  11. Carefully sever any connective tissue around the heart.
    NOTE: Steps 3.10-3.11 are critical; perform with proficiency and dexterity.
  12. Use the scissors to clip the right atrium (dark lobe on the upper left of the heart). Turn off the flow of isoflurane to the breather.
  13. Hold the heart steady with forceps. With the bevel of the butterfly needle facing up, pierce the left ventricle while keeping the needle level and parallel to the animal.
  14. Hold the needle in place, turn on the pump, and perfuse at least 30 mL of the saline/heparin solution until the fluid leaving the heart is opaque and the liver and lungs pale in color.
    NOTE: Steps 3.13-3.14 are critical; perform with proficiency and dexterity.
  15. Turn off the pump, remove the needle, and transfer the mouse to the dissection area.

4. Dissection

  1. Using large surgical scissors, decapitate the head.
  2. Cut the fur from the back of the head up to the eyes. Peel the skin back to expose the skull.
  3. Clip the skull between the eyes. Make two cuts at the back of the skull, at the 10 and 2 o'clock positions, then make one long cut (keep tips up to avoid damaging the brain) along the midsagittal line of the skull to the original cut between the eyes.
  4. Use forceps to peel the two halves of the skull away to the sides. Use a spatula to remove the brain and place it into a 60 mm glass Petri dish on ice filled with cold D-PBS (Figure 1).
  5. Use a scalpel or razor to separate each hemisphere. Then remove the olfactory bulbs and cerebellum.
  6. Use forceps to remove the midbrain until the hippocampus is exposed.
  7. Secure the brain with forceps. Using a second set of forceps, gently tease the hippocampus out of each hemisphere, and transfer both hippocampi to a labeled 1.5 mL tube containing cold D-PBS.
  8. Place the sample tube containing the two hippocampi from the mouse on ice.

5. Prepare Enzyme Mix 1 and 2 for each sample

NOTE: For volumes greater than 2 mL, use a 10 mL serologic pipette; for volumes, 200 µL-2 mL, use a 1000 µL pipette; for volumes, 21-199 µL, use a 200 µL pipette; for volumes, 2-20 µL, use a 20 µL pipette; for volumes under 2 µL, use a 0-2 µL pipette.

  1. For each sample, thaw one aliquot each of Enzyme P and Enzyme A at room temperature.
  2. For Enzyme mix 1, combine 50 µL of Enzyme P and 1900 µL of Buffer Z in a labeled C Tube (Table of Materials).
  3. For Enzyme mix 2, add 20 µL of Buffer Y to the thawed 10 µL aliquot of Enzyme A.

6. Adult brain dissociation protocol17

NOTE: When working with samples, tubes should be placed in a tube rack at room temperature while BSA and D-PBS remain on ice unless otherwise noted.

  1. Switch on the dissociator.
  2. Use forceps to transfer the hippocampi tissue pieces to the C Tube.
  3. Transfer 30 µL of Enzyme mix 2 into the C Tube. Twist the cap until tension is felt, then tighten until it clicks.
  4. Place the C Tube upside down into a position of the dissociator; the sample will be assigned the Selected status (Figure 2). Secure the heater over the C Tube.
  5. Press the folder icon, select Favorites folder, scroll to and select the 37C_ABDK_02 program. Click on OK to apply the program to all selected C tubes, then tap on Start (Figure 2).
  6. Label one 50 mL conical tube per sample.
  7. Place a 70 µm cell strainer on each 50 mL conical tube and wet with 2 mL of BSA buffer.
  8. Upon completion of the program, remove the heater and the C tube from the dissociator.
  9. Add 4 mL of BSA buffer to the sample and apply the mixture to the cell strainer on the 50 mL conical tube.
  10. Add 10 mL of D-PBS to the C Tube, close it, and swirl the solution gently. Apply it to the cell strainer on the 50 mL conical tube.
  11. Discard the cell strainer and the C Tube. Centrifuge the suspension at 300 x g for 10 min at 4 °C. Then, aspirate and discard the supernatant.

7. Debris removal

  1. Resuspend the pellet with 1550 µL of cold D-PBS and transfer the suspension to a labeled 15 mL conical tube.
  2. Add 450 µL of cold Debris Removal Solution and pipette up and down (do not vortex).
    NOTE: Debris Removal Solution is a reagent in the commercial Adult Brian Dissociation Kit17.
  3. Gently overlay 1 mL of cold D-PBS on top of the cell suspension, keeping the tip against the wall of the conical tube. Repeat until the total overlay is 2 mL.
    NOTE: This step is critical; perform with proficiency and dexterity.
  4. Centrifuge at 3000 x g for 10 min at 4 °C with full acceleration and full brake.
    NOTE: If the phases are not clearly separated, repeat steps 7.2-7.3. Centrifuge a final time at 1000 x g for 10 min at 4 °C.
  5. The suspension should now consist of three distinct layers (Figure 3). Aspirate the topmost layer. Sweep the pipette tip back and forth to aspirate the white middle layer. Remove as much of the middle layer as possible without disturbing the bottommost layer.
    NOTE: This step is critical; perform with proficiency and dexterity.
  6. Add 2 mL of cold D-PBS and pipette up and down to mix.
  7. Centrifuge at 1000 x g for 10 min at 4 °C with full acceleration and full brake. Aspirate and discard the supernatant. Resuspend the pellet in 1 mL of BSA buffer.
    ​NOTE: Cells can be resuspended in the appropriate buffer then magnetically labeled and isolated in preparation for single-cell sequencing at this point.

8. Cell count

  1. Perform cell counting as per the manufacturer's protocol of available cell counter (one option is noted in the Table of Materials)

9. Live/dead stain

  1. Centrifuge the remaining 900 µL (from 7.7) at 1000 x g for 10 min at 4 °C with full acceleration and full brake.
  2. While the sample is spinning, label one flow tube per sample and wrap it in foil to limit light exposure.
  3. Aspirate and discard the supernatant.
  4. Resuspend the pellet in 50 µL of diluted live/dead stain (previously prepared).
    NOTE: This step should be performed in a low-light setting. Turn off overhead room lights to achieve this.
  5. Transfer each sample to the corresponding labeled flow tube and incubate at room temperature for 8-10 min in the dark (e.g., a drawer or box).
  6. Add 500 µL of BSA buffer and centrifuge at 1000 x g for 10 min at 4 °C with full acceleration and full brake.
  7. Aspirate and discard the supernatant.
    ​NOTE: The pellet may not be visible; leave a small amount of buffer behind so as not to unintentionally aspirate the pellet. Cells can be resuspended in the appropriate buffer, blocked, and stained with cell-specific antibodies at this point. See Supplemental File 1 for sample protocol18.

10. Fixation (optional)

  1. Resuspend the pellet in 200 µL of 1% PFA (previously prepared). Incubate for 15 min at 4 °C.
  2. Wash by adding 500 µL of D-PBS and centrifuge at 300 x g for 10 min at 4 °C.
  3. Aspirate the supernatant.
    NOTE: The pellet may not be visible; leave a small amount of buffer behind so as not to unintentionally aspirate the pellet.
  4. Resuspend the pellet in 200 µL of D-PBS and store at 4 °C for up to 3 days.

11. Flow cytometry

  1. Label the filter caps on the new tubes.
  2. Using a 1 mL pipette, pipette each sample onto the filter cap.
  3. Centrifuge briefly at 200 x g at 4 °C, only allowing the centrifuge to reach 200 x g before stopping the run.
  4. Proceed to flow cytometry core for downstream analysis.

Representative Results

Samples were processed with a flow cytometer at a core facility, and the resulting data were evaluated with a software package for flow analysis. Previously, compensation controls were analyzed-the live/dead stain and negative control. If multiple fluorochromes are used, fluorescence minus one (FMO) controls and single-stain controls should be prepared for each antibody. Compensation for spectral overlap for the experimental samples was calculated based on the analyzed controls. For cell population identification, a hierarchical gating strategy was used. The primary gate excluded debris in the forward scatter (cell size) versus side scatter (granularity) plot19,20. Subsequently, the dead cells were excluded (Figure 4, Figure 5, Figure 6, Supplemental Figure 1, Supplemental Figure 2, Supplemental Figure 3, and Supplemental Figure 4). The following gate excluded cells positive for Myelin Basic Protein (Supplemental Figure 4). Of the remaining cells, density plots of cells positive for each fluorochrome were created (Supplemental Figure 4). The frequency of each neuronal cell population was calculated out of the third gate (Supplemental Figure 4). Samples that were processed with manual mechanical dissociation21 and enzymatic digestion yielded a substantially lower population of cells of interest (Supplemental File 221, Figure 4, and Supplemental Figure 1). Conversely, both fixed and fresh samples prepared via automated mechanical dissociation and enzymatic digestion returned a population of cells of interest several-fold larger (Figure 5, Figure 6, Supplemental Figure 2, and Supplemental Figure 3).

Figure 1
Figure 1: Mouse brain. (A) Properly perfused. (B) Non-perfused. Please click here to view a larger version of this figure.

Figure 2
Figure 2: Selected status in step 6.4. Please click here to view a larger version of this figure.

Figure 3
Figure 3: Tri-layered suspension in step 7.5: Buffer (top layer), cell debris, debris removal solution, and cells (bottom layer). Please click here to view a larger version of this figure.

Figure 4
Figure 4: Representative analysis of fixed samples processed using a combination of manual dissociation by Pasteur pipette trituration and enzymatic digestion. First of two samples processed simultaneously. (A) Percentage of cells that are the cellular population of interest. (B) Percentage of the population of interest that are live cells. Please click here to view a larger version of this figure.

Figure 5
Figure 5: Representative analysis of fresh samples processed using a combination of automated mechanical dissociation and enzymatic digestion. First of two samples processed simultaneously. (A) Percentage of cells that are the cellular population of interest. (B) Percentage of the population of interest that are live cells. Please click here to view a larger version of this figure.

Figure 6
Figure 6: Representative analysis of fixed samples processed using a combination of automated mechanical dissociation and enzymatic digestion. First of two samples processed simultaneously. (A) Percentage of cells that are the cellular population of interest. (B) Percentage of the population of interest that are live cells. Please click here to view a larger version of this figure.

Supplemental Figure 1: Representative analysis of fixed samples processed using a combination of manual Pasteur pipette trituration dissociation and enzymatic digestion. Second of two samples processed simultaneously. (A) Percentage of cells that are the cellular population of interest. (B) Percentage of the population of interest that are live cells. Please click here to download this File.

Supplemental Figure 2: Representative analysis of fresh samples processed using a combination of automated mechanical dissociation and enzymatic digestion. Second of two samples processed simultaneously. (A) Percentage of cells that are the cellular population of interest. (B) Percentage of the population of interest that are live cells. Please click here to download this File.

Supplemental Figure 3: Representative analysis of fixed samples processed using a combination of automated mechanical dissociation and enzymatic digestion. Second of two samples processed simultaneously. (A) Percentage of cells that are the cellular population of interest. (B) Percentage of the population of interest that are live cells. Please click here to download this File.

Supplemental Figure 4: Representative analysis of stained and fixed samples processed using a combination of automated mechanical dissociation and enzymatic digestion. (A) Percentage of cells that are the cellular population of interest. (B) Percentage of the population of interest that are live cells. (C). MBP Cells. (D). PSA-NCAM+ cells (Neuronal Precursor Cells). (E). ACSA2+ cells (Astrocytes). (F). CD31+ cells (Endothelial). (G). CD11b+ cells (Microglia). Please click here to download this File.

Supplemental File 1: Staining protocol. A sample staining protocol for immunostaining of cell surface markers. Please click here to download this File.

Supplemental File 2: Adapted manual mechanical and enzymatic dissociation protocol. This method is adapted from a previously published protocol21. Please click here to download this File.

Discussion

Several steps in this neural dissociation protocol require proficient technique and dexterity–perfusion, supernatant aspiration, and myelin removal. Throughout the perfusion process, the internal organs must remain intact (aside from removing the diaphragm and clipping the heart); this includes avoiding the upper chambers of the heart with the butterfly needle. While the amount of saline with heparin needed varies, transparent fluid flowing from the heart indicates the process is complete. The brain must be completely and properly perfused, at which point it will appear off-white (Figure 1). With perfusion, the red blood cell removal step becomes extraneous, eliminating excess manipulation of the samples that can result in cell loss. Subsequently, the debris removal step requires a steady hand. For the centrifugation to result in clearly defined layers following the D-PBS overlay (Figure 3), the layers must not be disturbed in transit or while pipetting. Additionally, when aspirating the top two layers, enough suspension must be removed to eliminate excessive cell debris while still leaving a large enough sample behind. This is a key step as dead cells are more likely to bind nonspecifically and become autofluorescent22,23, further stressing the importance of choosing a method that consistently results in high cell viability. Finally, when aspirating the supernatant, the pellet may not always be visible. A small amount of residual supernatant must be left to ensure the sample is not accidentally discarded.

There are advantages and disadvantages to fixing the samples. Not all antibody markers are compatible with fixation, limiting downstream analysis depending on the cell populations of interest. Also, using overly concentrated PFA or leaving the cells in the fixative for an extended period of time can result in autofluorescence and false-positive readings, thereby confounding the results24,25. By using a 1% PFA solution and minimizing the exposure of the cells, the likelihood of false-positive readings is greatly reduced. As this procedure is detailed and has many timing variables, using fresh cells places labs under strict time constraints to ensure the cells remain viable. Fixation preserves the cell structure for next-day analysis.

Single-cell analysis can provide key insights into treatment efficacy, cell function, and disease or treatment mechanisms of action. Example methods include single-cell DNA and RNA sequencing26,27, cytometry by time-of-flight22,28, flow cytometry, and immunohistochemistry. With single-cell mRNA sequencing, gene expression at the time of sample collection can provide cell-type-specific insights26. For instance, a research group performed single-cell RNA sequencing on D1 and D2 dopamine receptors expressing medium spiny neuron subtypes from dorsomedial striatum27. The group redefined the transcriptome of medium spiny neurons by detecting novel subtype-specific marker genes and identifying genes that were previously and incorrectly reported to be differentially expressed due to a lack of single-cell resolution27. Ho et al. highlighted the potential of single-cell RNA sequencing in discovering cell type-specific drug targets27. With single-cell DNA sequencing, changes in gene expression can be described by measuring DNA and histone modifications, chromatin accessibility, and chromatin conformation26. In measuring single nucleus DNA methylation, Liu et al. constructed a single-cell DNA methylome atlas of 45 mouse brain regions and identified 161 neuronal cell types29. Sample preparation for single-cell sequencing is more intricate, especially the isolation of single-cells and debris removal. Mattei et al. examined the effect of enzymatic and mechanical dissociation on transcriptomic and proteotype profiling, noting that neural dissociation methods inherently introduce a level of bias30. Several groups have noted the importance of working efficiently, dissecting on ice, and using transcriptional inhibitors26,30,31. Mattei et al. also identified affected genes and proteins to inform analysis30. However, these techniques still provide detailed insights into cellular building blocks that are unmatched by bulk-tissue transcriptomics26,27.

Flow cytometry is a powerful analytic tool that can simultaneously identify and measure parameters of single-cell populations using fluorescent probes. Some applications of flow cytometers include cell cycle analysis, cell sorting, viability, phenotyping, cell proliferation, and functional analyses32,33. Most of these applications utilize surface staining due to the accessibility of cell surface proteins. These proteins can be stained to identify specific cell populations based on lineage, developmental stage, and function19,32,33. For example, samples can be surface stained to identify populations of astrocytes, endothelial cells, neuronal precursor cells, and microglia34. A primary advantage when staining surface proteins of live cells is being able to sort the cells while retaining the option to conduct further downstream analysis34. While surface staining techniques are fairly standard, intracellular staining is a more delicate procedure. With intracellular flow cytometry, the cells must be fixed and permeabilized before staining to allow the antibody to cross the cell membrane20,32,33,34. Ideally, the cell morphology will remain intact; however, permeabilization risks protein denaturation, which would negatively impact antibody detection22,34. Some methods of further downstream analysis are no longer an option once the cells are fixed20. While the downsides to intracellular staining are more pronounced than surface staining, the former allows detection and analysis of intracellular molecules that would otherwise not be plausible. Additionally, cell surface and intracellular staining procedures may be coupled to definitively identify certain cell types or assess additional parameters simultaneously20,28,34.

There are several methods of neural dissociation that can be used to prepare the single-cell suspension required for cellular analysis, though they are not equally effective. Compared to standardized kits and the aforementioned techniques, this particular method of neural dissociation is intended for processing small quantities of tissue, yields a highly viable single-cell suspension (>90%), and streamlines the experiment. With this protocol, other labs are equipped to perform neural dissociation in a reliable and reproducible manner.

開示

The authors have nothing to disclose.

Acknowledgements

We thank Aimee Rogers for providing hands-on training and continued product support. We thank Dr. Amanda Burke for ongoing troubleshooting and clarifying discussions. We thank Meredith Joheim and the UAMS Science Communication Group for the grammatical editing and formatting of this manuscript. This study was supported by NIH R25GM083247 and NIH 1R01CA258673 (A.R.A).

Materials

1.5 mL Microcentrifuge Tubes Fisher Scientific 02-682-003 Basix, assorted color
15 mL Falcon Tubes Becton Dickinson Labware Europe 352009 Polystyrene
25 mL Serological Pipets Fisher Scientific 14-955-235
5 mL Round Bottom Polystyrene Test Tube Falcon 352052
500 mL Vacuum Filter/ Storage Bottle System Corning 431097
70 μm cell strainer Fisher Scientific 08-771-2
Adult Brain Dissociation Kit Miltenyi Biotec  130-107-677 Contains Enzyme P, Buffer Z, Buffer Y, Enzyme A, Buffer A, Debris Removal Solution
Aluminum Foil Fisher Scientific 01-213-105
Anti-ACSA-2-PE-Vio770, mouse, clone REA969 Miltenyi Biotec 130-116-246
Anti-Myelin Basic Protein Sigma-Aldrich M3821-100UG
Anti-PSA-NCAM-PE, human, mouse and rat, Clone 2-2B Miltenyi Biotec 130-117-394
BD LSRFortessa BD
BSA Sigma-Aldrich A7906-50G
CD11b-VioBlue, mouse, Clone REA592 Miltenyi Biotec 130-113-810
CD31 Antibody Miltenyi Biotec 130-111-541
Ceramic Hot Plate Stirrer Fisher Scientific 11-100-100SH
Dimethyl Sulfoxide Fisher Scientific BP231-100
Ethanol Pharmco by Greenfield Global 111000200
Falcon 50 mL Conical Centrifuge Tubes Fisher Scientific 14-432-22
Fine Scissors – Sharp Fine Science Tools 14060-09 Perfusion
FlowJo BD (v10.7.0)
gentleMACS C Tubes Miltenyi Biotec 130-093-237
gentleMACS Octo Dissociator with Heaters Miltenyi Biotec 130-096-427
Gibco DPBS (1X) ThermoFisher Scientific 14190144
Glass Beaker Fisher Scientific 02-555-25A
Heparin sodium Fresenius Kabi 504011
LIVE/DEAD Fixable Aqua Dead Cell Stain Kit ThermoFisher L34965
Magnetic Stir Bar Fisher Scientific 14-513-51
Noyes Spring Scissors Fine Science Tools 15012-12 Dissection
Paraformaldehyde Sigma-Aldrich 441244-3KG Prilled, 95%
Pipette tips GP LTS 20 µL 960A/10 Rainin 30389270
Pipette Tips GP LTS 250 µL 960A/10 Rainin 30389277
Pipette tips RT LTS 1000 µL FL 768A/8 Rainin 30389213
Rainin Pipet-Lite XLS (2, 20, 200, 1000 μL) Rainin 30386597
RBXMO FITC XADS Fisher Scientific A16167
Round Ice Bucket with Lid Fisher Scientific 07-210-129
Round-Bottom Tubes with Cell Strainer Cap Falcon 100-0087
S1 Pipet Fillers ThermoFisher Scientific 9541
Spatula & Probe Fine Science Tools 10090-13 Dissection & Perfusion
Surflo Winged Infusion Set 23 G x 3/4" Termuno SV-23BLK Butterfly needle
Test Tube Rack Fisher Scientific 14-809-37
Thermo Scientific Legend XTR Centrifuge ThermoFisher discontinued Or other standard table top centrifuge
Variable-Flow Peristaltic Pump Fisher Scientific 13-876-2 Low-flow model
VetFlo Starter Kit for Mice Kent Scientific VetFlo-MSEKIT Anesthesia mask, tubing, induction chamber, charcoal canisters
VetFlo Vaporizer Single Channel Anesthesia System Kent Scientific VetFlo-1210S 0.2–4 LPM
Vi-CELL XR Cell Viability Analyzer Beckman Coulter Life Sciences 731196 Cell Counting
Vi-CELL XR 4 Bags of Sample Vials Beckman Coulter Life Sciences 383721 Cell Counting

参考文献

  1. Andersen, P., Morris, R., Amaral, D., Bliss, T., O’Keefe, J. . The Hippocampus Book. , (2007).
  2. Kempermann, G., Kuhn, H. G., Gage, F. H. Genetic influence on neurogenesis in the dentate gyrus of adult mice. Proceedings of the National Academy of Sciences of the United States of America. 94, 10409-10414 (1997).
  3. Zhao, C., Deng, W., Gage, F. H. Mechanisms and Functional Implications of Adult Neurogenesis. Cell. 132, 645-660 (2008).
  4. Kempermann, G., Song, H., Gage, F. H. Neurogenesis in the adult hippocampus. Cold Spring Harbor Perspectives in Biology. 7, 018812 (2015).
  5. Bond, A. M., Ming, G. L., Song, H. Adult mammalian neural stem cells and neurogenesis: Five decades later. Cell Stem Cell. 17, 385-395 (2015).
  6. Sato, K. Effects of microglia on neurogenesis. Glia. 63, 1394-1405 (2015).
  7. Mu, Y., Lee, S. W., Gage, F. H. Signaling in adult neurogenesis. Current Opinion in Neurobiology. 20, 416-423 (2010).
  8. Fares, J., Diab, Z. B., Nabha, S., Fares, Y. Neurogenesis in the adult hippocampus: history, regulation, and prospective roles. International Journal of Neuroscience. 129, 598-611 (2018).
  9. Tosun, M., Semerci, F., Maletic-Savatic, M. Heterogeneity of stem cells in the hippocampus. Advances in Experimental Medicine and Biology. 1169, 31-53 (2019).
  10. Abbott, L. C., Nigussie, F. Adult neurogenesis in the mammalian dentate gyrus. Journal of Veterinary Medicine Series C: Anatomia Histologia Embryologia. 49, 3-16 (2020).
  11. Rodrigues, G. M., Fernandes, T. G., Rodrigues, C. A., Cabral, J. M., Diogo, M. M. Purification of human induced pluripotent stem cell-derived neural precursors using magnetic activated cell sorting. Methods in Molecular Biology. 1283, 137-145 (2015).
  12. Ko, I. K., Kato, K., Iwata, H. Parallel analysis of multiple surface markers expressed on rat neural stem cells using antibody microarrays. Biomaterials. 26, 4882-4891 (2005).
  13. Jager, L. D., et al. Effect of enzymatic and mechanical methods of dissociation on neural progenitor cells derived from induced pluripotent stem cells. Advances in Medical Sciences. 61 (1), 78-84 (2017).
  14. Volovitz, I., et al. A non-aggressive, highly efficient, enzymatic method for dissociation of human brain-tumors and brain-tissues to viable single-cells. BMC Neuroscience. 17, 1-10 (2016).
  15. Adult brain dissociation kit: mouse and rat. Miltenyi Biotec Available from: https://www.miltenyibiotec.com/upload/assets/IM0011920.pdf (2020)
  16. Cell surface flow cytometry staining protocol. Miltenyi Biotec Available from: https://www.miltenyibiotec.com/US-en/applications/all-protocols/cell-surface-flow-cytometry-straining-protocol-pbs-bsa-1-50.html (2021)
  17. Finak, G., Jiang, W., Gottardo, R. CytoML for cross-platform cytometry data sharing. Cytometry Part A: The Journal of the International Society for Analytical Cytology. 93, 1189-1196 (2018).
  18. Turaç, G., et al. Combined flow cytometric analysis of surface and intracellular antigens reveals surface molecule markers of human neuropoiesis. PLoS One. 8, 1-14 (2013).
  19. Schwarz, J. M. Using fluorescence activated cell sorting to examine cell-type-specific gene expression in rat brain tissue. Journal of Visualized Experiments: JoVE. (99), e52537 (2015).
  20. Brummelman, J. application and computational analysis of high-dimensional fluorescent antibody panels for single-cell flow cytometry. Nature Protocols. 14, 1946-1969 (2019).
  21. Recommended controls for flow cytometry. Abcam Available from: https://www.abam.com/protocols/recommended-conntrols-for-flow-cytometry (2021)
  22. . Fixing cells with paraformaldehyde (PFA) for flow cytometry Available from: https://flowcytometry.utoronto.ca/wp-content/uploads/2016/02/FixingCells_PFA.pdf (2021)
  23. Stewart, J. C., Villasmil, M. L., Frampton, M. W. Changes in fluorescence intensity of selected leukocyte surface markers following fixation. Cytometry Part A: The Journal of the International Society for Analytical Cytology. 71, 379-385 (2007).
  24. Armand, E. J., Li, J., Xie, F., Luo, C., Mukamel, E. A. Single-cell sequencing of brain cell transcriptomes and epigenomes. Neuron. 109, 11-26 (2021).
  25. Ho, H., et al. A guide to single-cell transcriptomics in adult rodent brain: The medium spiny neuron transcriptome revisited. Frontiers in Cellular Neuroscience. 12, 1-16 (2018).
  26. Li, L., et al. Novel technologies in studying brain immune response. Oxidative Medicine and Cellular Longevity. 2021, 6694566 (2021).
  27. Liu, H., et al. DNA methylation atlas of the mouse brain at single-cell resolution. bioRxiv. , (2020).
  28. Mattei, D., et al. Enzymatic dissociation induces transcriptional and proteotype bias in brain cell populations. International Journal of Molecular Sciences. 21, 1-20 (2020).
  29. Liu, L., et al. Dissociation of microdissected mouse brain tissue for artifact free single-cell RNA sequencing. STAR Protocols. 2 (2), 100590 (2021).
  30. Delmonte, O. M., Fleisher, T. A. Flow cytometry: Surface markers and beyond. The Journal of Allergy and Clinical Immunology. 143, 528-537 (2019).
  31. O’Connor, J. E., et al. The relevance of flow cytometry for biochemical analysis. IUBMB Life. 51, 231-239 (2001).
  32. Menon, V., Thomas, R., Ghale, A. R., Reinhard, C., Pruszak, J. Flow cytometry protocols for surface and intracellular antigen analyses of neural cell types. Journal of Visualized. Experiments. (94), e52241 (2014).

Play Video

記事を引用
Trujillo, M., McElroy, T., Brown, T., Simmons, P., Ntagwabira, F., Allen, A. R. Combined Mechanical and Enzymatic Dissociation of Mouse Brain Hippocampal Tissue. J. Vis. Exp. (176), e63007, doi:10.3791/63007 (2021).

View Video