Implant-associated infection is a significant clinical complication. This study describes an approach using platelet-rich plasma (PRP) to prevent implant-associated infections, presents the protocol for preparing PRP with constant platelet concentration, and reports the newly identified antimicrobial properties of PRP and related protocols for examining such antimicrobial properties in vitro.
Implant-associated infection is becoming more and more challenging to the healthcare industry worldwide due to increasing antibiotic resistance, transmission of antibiotic resistant bacteria between animals and humans, and the high cost of treating infections.
In this study, we disclose a new strategy that may be effective in preventing implant-associated infection based on the potential antimicrobial properties of platelet-rich plasma (PRP). Due to its well-studied properties for promoting healing, PRP (a biological product) has been increasingly used for clinical applications including orthopaedic surgeries, periodontal and oral surgeries, maxillofacial surgeries, plastic surgeries, sports medicine, etc.
PRP could be an advanced alternative to conventional antibiotic treatments in preventing implant-associated infections. The use of PRP may be advantageous compared to conventional antibiotic treatments since PRP is less likely to induce antibiotic resistance and PRP’s antimicrobial and healing-promoting properties may have a synergistic effect on infection prevention. It is well known that pathogens and human cells are racing for implant surfaces, and PRP’s properties of promoting healing could improve human cell attachment thereby reducing the odds for infection. In addition, PRP is inherently biocompatible, and safe and free from the risk of transmissible diseases.
For our study, we have selected several clinical bacterial strains that are commonly found in orthopaedic infections and examined whether PRP has in vitro antimicrobial properties against these bacteria. We have prepared PRP using a twice centrifugation approach which allows the same platelet concentration to be obtained for all samples. We have achieved consistent antimicrobial findings and found that PRP has strong in vitro antimicrobial properties against bacteria like methicillin-sensitive and methicillin-resistant Staphylococcus aureus, Group A Streptococcus, and Neisseria gonorrhoeae. Therefore, the use of PRP may have the potential to prevent infection and to reduce the need for costly post-operative treatment of implant-associated infections.
Implant-associated infection is a significant clinical complication. Staphylococcus aureus (S. aureus) is one of the most common microorganisms isolated from implant-associated infections. It is capable of producing a biofilm that covers the surfaces of implants and may lead to antibiotic-resistant infection 1,2. Treatment of implant-associated infection frequently requires long-term hospitalization for repeated debridements and prolonged parenteral antibiotic therapy. In antibiotic resistant cases, removal of the implant may be necessary. The rising resistance of bacteria to antibiotics has also been referred to by the Centers for Disease Control and Prevention (CDC) as “one of the world’s most pressing health problems.” In time, without the development of new and effective antimicrobial treatments, it is possible that multi-drug resistant pathogens will be untreatable with conventional antibiotics. Prevention of implant-associated infection is therefore important and novel prophylactic agents or approaches are needed for preventing such infections.
Platelet-rich plasma (PRP) is a concentration of autologous blood that contains over 30 growth factors which can help with bone and bone graft healing 3-5. The application of PRP to enhance bone regeneration and soft tissue maturation has been increasingly reported in clinics because of its high concentration of various growth factors released by platelets.
Several characteristics of PRP indicate that PRP may also have antimicrobial properties 6-9. PRP contains a large number of platelets, a high concentration of leukocytes (which may possess host-defense actions against bacteria and fungi), and multiple antimicrobial peptides 7,8,10. In a recent study of a large cohort of cardiac surgical patients, it was revealed that the intraoperative use of PRP-gel during wound closure significantly decreased the incidence of superficial and deep sternum infection 11. For these reasons and observations, we hypothesized that PRP, besides its well-studied healing-promoting properties, has antimicrobial properties. The potential advantages of using PRP to prevent infection may include: (i) PRP is less likely to induce resistance compared to conventional antibiotic treatments. (ii) PRP also has properties that promote healing which may have a synergistic effect on infection prevention; PRP’s healing-promoting properties could provide a seal to prevent bacterial attachment thereby reducing the odds for infection as pathogens and human cells are racing for implant surfaces 12,13. (iii) PRP is inherently biocompatible, and safe and free from the risk of transmissible diseases.
Our long-term goal is to use PRP as a new approach to prevent implant-associated infections. The aim of this study was to prepare PRP using a twice centrifugation approach, to examine PRP’s in vitro antimicrobial properties, and to describe the protocols for evaluating such antimicrobial properties.
1. Preparation and Activation of PRP
1.1 Blood draw
1.2 PRP preparation (Figure 1)
1.3 PRP activation
2. In vitro Antimicrobial Test of PRP Using Kill Curve Assay (Figure 2)
PRP is reproducibly prepared using a twice centrifugation approach (Figure 1). PRP is found to present strong (up to 100-fold reduction in CFUs) in vitro antimicrobial properties against methicillin resistant S. aureus (MRSA) (Figure 3), which is commonly found in hospitals worldwide 14. Similarly, PRP has strong antimicrobial properties against methicillin sensitive S. aureus (MSSA), Group A Streptococcus, and Neisseria gonorrhoeae.
The twice centrifugation approach allows acquisition of PRP with the same platelet concentration (i.e. 2.0 x 106 platelets/μl) but concentrated (~10 times above the baseline in blood; Figure 4) and allows us to obtain consistent antimicrobial findings; no significant differences in CFU findings among PRPs from different individual animals (i.e. rabbits) have been observed.
Groups | PRP/PPP/PBS | MHB | MRSA inoculum |
Control | None | 1,800 μl | 200 μl |
Control | None | 2,000 μl | None |
Control | PBS + thrombin (200 μl) | 1,600 μl | 200 μl |
PPP | PPP + thrombin (200 μl) | 1,600 μl | 200 μl |
PRP | PRP + thrombin (200 μl) | 1,600 μl | 200 μl |
Table 1. Experimental samples for antimicrobial assessment of PRP.
Figure 1. PRP preparation using a twice centrifugation procedure. (A) First centrifugation. After the first centrifugation, three layers are formed, and the top two layers (i.e. plasma and buffy coat layers) and 2-3 mm of the bottom layer (i.e. red blood cell layer) are transferred to a second sterile centrifuge tube. (B) Second centrifugation. After the second centrifugation, the top layer is transferred to a new sterile tube and designated as PPP. The remaining is adjusted with PPP to a platelet concentration of 2.0 x 106 platelets/μl and designated as PRP.
Figure 2. Experimental set-up for assessing the antimicrobial properties of PRP using the kill curve assay. First, PRP or PPP is added to the test tubes, and immediately activated with thrombin solution. Next, MHB is added followed by bacterial inoculums. Aliquots of samples are taken at different time points and plated for CFU counts.
Figure 3. PRP, PPP, or PBS are placed in a sterile 5 ml polystyrene tube along with thrombin, MHB broth, and MRSA inoculum and then incubated at 37 °C with orbital agitation at 150 rpm. At pre-determined time points (i.e. 1 and 2 hr), aliquots of samples are taken and plated for CFU counts. (A) CFU data and (B) representative plate images at 10-2 dilution. Significant reduction (~100-fold at 2 hr) of MRSA growth is obtained using PRP compared to PPP and PBS controls. This is true for bacteria like MSSA, Group A Streptococcus, and Neisseria gonorrhoeae as well.
Figure 4. Blood smears of whole blood (left) and PRP (right). PRP prepared from the twice centrifugation approach has ~10 times the number of platelets compared to whole blood.
Platelet-rich plasma has been increasingly used for clinical applications due to its healing-promoting properties 15-17. In the present study, PRP was presented as a new approach for infection prevention. PRP was found to have strong antimicrobial properties against MRSA, MSSA, Group A Streptococcus, and Neisseria gonorrhoeae. The major advantages of PRP, compared to conventional antibiotic treatments, for infection prevention include: (1) Current antibiotic therapies are facing challenges including increasingly reported antibiotic resistance 14,18-20. PRP could be an advanced alternative because (i) PRP’s platelet microbicidal proteins may possess chemotactic properties for immune cells such as neutrophils, monocytes and T cells which play important roles in defending against pathogen invasion 21, and (ii) compared to conventional antibiotics, platelet microbicidal proteins are less prone to inducing bacterial resistance due to the difficulty in changing bacterial membrane structures 22. (2) PRP not only reduces infections but also promotes wound healing; both are costly in terms of trauma, time, and money.
PRP has recently attracted increased interest. However, there are numerous complex variations among PRP preparation protocols including the starting number of platelets, the use of anticoagulants, the inclusion of leukocytes, and the use of activators 23-27. The variation in PRP preparation contributes in part to the controversial outcomes both in animal and clinical studies 28. As a result, a big issue for PRP studies is to control the variation. In the current study, a twice centrifugation approach was performed, and the platelet concentration of PRP was fixed at 2 x 106 platelets/μl (~10 times above the baseline in blood) to standardize the PRP preparation protocol and to limit the variability in PRP preparation. The twice centrifugation approach presented is simple, can be easily applied for isolation of PRP from blood of other animals and human beings, and has led to consistent in vitro antimicrobial properties of rabbit PRP in the present study. However, differences may still exist since the growth factors and other chemicals within or released from platelets may vary among individual cells and animals; some cell populations (e.g. leukocyte) were not controlled. Note that leukocyte-rich PRP was prepared and used in this study, since leukocytes are involved in direct bacterial killing and antigen-specific immune response. The protocols could be further modified to obtain leukocyte-poor PRP by carrying out a second centrifugation of only the top layer (i.e. plasma and platelet portion) after the first centrifugation (Figure 1).
In this study, 50 ml whole blood was used to obtain approximately 5 ml PRP. If blood volume is a concern, pooled blood from multiple animals may be used to prepare PRP. If clots form during blood draw and/or centrifugation, most likely some platelets are activated which will result in low platelet yield. Therefore, sufficient anticoagulants and gentle but thorough mixing are important steps for successful PRP isolation.
PRP was activated using thrombin in the present study. Other approaches including calcium chloride, exogenous or autologous thrombin with or without calcium chloride, mechanical stress (additional high speed centrifugation), and batroxobin can also be applied for PRP activation 29-32. Note that platelets activated by thrombin may likely release their granule contents much faster than platelets activated by other chemicals. The cause is that, besides its capability to convert factor XI to XIa, VIII to VIIIa, V to Va, and fibrinogen to fibrin, thrombin can promote platelet activation and aggregation via activation of protease-activated receptors on platelet cell membranes 33-35.
The kill curve assay was presented to assess the in vitro antimicrobial activity of PRP. Unlike the agar disk diffusion assay, the kill curve assay allows quantitative assessment of the rate of bactericidal activity over time. One critical step to properly disperse bacteria when counting CFUs is to mix the whole culture thoroughly by vigorous pipetting before the sample is drawn and vortexed for serial dilutions, as PRP gel may confound one’s ability to properly disperse bacteria.
Overall, platelet-rich plasma has strong antimicrobial properties against bacteria such as S. aureus, Group A Streptococcus, and Neisseria gonorrhoeae. Besides its well-studied healing-promoting properties, PRP may serve as a new approach to prevent implant-associated infections. The mechanism of PRP’s antimicrobial properties is still unknown and further investigations in this area are needed.
The limitations of this study include that PRP did not fully eliminate the bacteria under our experimental conditions (1 x 105 CFU/ml). This may be due to the high virulence of our clinical bacterial strains that were used; 1 x 102 CFU (0.1 ml) of S. aureus induced severe infections in vivo 36-38. Alternatively, the amount of PRP may be increased to achieve better bacterial elimination, or PRP can be used together with systemic or local administration of conventional antibiotics for infection prevention; the dual effects (i.e. antimicrobial and healing-promoting properties) of PRP may be advantageous in promoting healing while preventing infection. Another limitation is that PRP should not be used for patients who have already been systemically infected (e.g. sepsis patients). This is because bacteria in the blood may be passed on from PRP to the application site unless appropriate sterilization techniques are applied. We recommend careful examination of possible bacterial contaminations of PRP before its usage.
The authors have nothing to disclose.
The authors thank Therwa Hamza, John E. Tidwell, Nina Clovis, and Suzanne Smith for experimental assistance and Suzanne Smith for proofreading. The authors also thank John Thomas, PhD for providing the bacterial clinical isolates and John B. Barnett, PhD for his support and the use of the biological safety lab at the Department of Microbiology, Immunology and Cell Biology at West Virginia University. The authors acknowledge financial support from the Osteosynthesis and Trauma Care Foundation and National Science Foundation (#1003907). Microscope experiments and image analysis were also performed in the West Virginia University Imaging Facility, which is supported in part by the Mary Babb Randolph Cancer Center and NIH grant P20 RR016440.
Animal use for blood draws were approved by the West Virginia University Institutional Animal Care and Use Committee. All experiments were executed in compliance with all relevant guidelines, regulations, and regulatory agencies.
Name of Reagent/Material | Company | Catalog Number | コメント |
Bovine thrombin | King Pharmaceuticals, Inc | 60793-215-05 | Thrombin (bovine origin) |
Calcium chloride | King Pharmaceuticals, Inc | 60793-215-05 | 10% calcium chloride |
Ethanol | Sigma-Aldrich | E7023 | |
Isoflurane | Baxter | 1001936060 | |
Mueller Hinton broth | Becton, Dickinson and Company | 275710 | |
Phosphate-buffered saline | Sigma-Aldrich | D8662 | |
Tri-sodium citrate | Sigma-Aldrich | W302600 | |
Tryptic soy agar | Fisher Scientific | R01202 | |
Centrifuge | Kendro Laboratory Products | 750043077 | |
Syringe filter | Millipore | SLGP033RS |