Rivista
/
Ingegneria
/
Generating Lap Joints Via Friction Stir Spot Welding on DP780 Steel
JoVE Journal
Ingegneria
È necessario avere un abbonamento a JoVE per visualizzare questo.  Accedi o inizia la tua prova gratuita.
JoVE Journal Ingegneria
Generating Lap Joints Via Friction Stir Spot Welding on DP780 Steel

Generating Lap Joints Via Friction Stir Spot Welding on DP780 Steel

DOI:
10.3791/58633-v

•

07:18 min

•

August 13, 2019

•

,
1Department of Health and Beauty,Shu Zen College of Medicine and Management, 2Department of Mold and Die Engineering,National Kaohsiung University of Science and Technology

Capitoli

  • 00:04Titolo
  • 00:54Material Preparation
  • 01:52Friction Stir Spot Welding Procedure
  • 05:20Results: FSSW Process on DP 780 Lap Joints
  • 06:32Conclusion

Summary

Traduzione automatica

Traduzione automatica

Here, we present a friction stir spot welding (FSSW) protocol on dual phase 780 steel. A tool pin with high-speed rotation generates heat from friction to soften the material, and then, the pin plunges into 2 sheet joints to create the lap joint.

Tags

Friction Stir Spot WeldingDP780 SteelLap JointsWeight ReductionAutomotive IndustryAHSSProcess ReliabilityResistance Spot WeldingZ-axial ForcePenetration DepthTool Pin Rotation SpeedDwell TimePlunge RateWork Piece ContaminationMicrofiber FabricsClamping ForceNon-rotating Clamping Ring

Article

Embed

AGGIUNGI ALLA PLAYLIST

Usage Statistics

Video correlati

Micropunching Lithography for Generating Micro- and Submicron-patterns on Polymer Substrates

Mechanical Expansion of Steel Tubing as a Solution to Leaky Wellbores

Preparation and Friction Force Microscopy Measurements of Immiscible, Opposing Polymer Brushes

Ultrasonic Welding of Thermoplastic Composite Coupons for Mechanical Characterization of Welded Joints through Single Lap Shear Testing

The Evolution of Silica Nanoparticle-polyester Coatings on Surfaces Exposed to Sunlight

Preparation and High-temperature Anti-adhesion Behavior of a Slippery Surface on Stainless Steel

Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass (ADG) Fresnel Lens for Concentrating Photovoltaics

Preparation of Aligned Steel Fiber Reinforced Cementitious Composite and Its Flexural Behavior

Applicability Analysis of Assessment Methods for Morphological Parameters of Corroded Steel Bars

O-cresol Concentration Online Measurement Based On Near Infrared Spectroscopy Via Partial Least Square Regression

Read Article