Rivista
/
Ingegneria
/
Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization
JoVE Journal
Ingegneria
È necessario avere un abbonamento a JoVE per visualizzare questo.  Accedi o inizia la tua prova gratuita.
JoVE Journal Ingegneria
Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization

DOI:
10.3791/53710-v

•

07:32 min

•

January 29, 2017

•

, , , , , , ,
1Materials Sciences Division,Lawrence Berkeley National Laboratory, 2Department of Polymer Science and Engineering,University of Massachusetts, Amherst, 3Advanced Light Source,Lawrence Berkeley National Laboratory

Capitoli

  • 00:05Titolo
  • 00:58Active Layer Printing
  • 03:26Synchrotron X-ray Measurement
  • 05:21Results: Dynamic Morphology Evolution of Obtained Smooth Bulk Heterojunction Solar Cell Thin Films
  • 06:47Conclusion

Summary

Traduzione automatica

Traduzione automatica

Here, we present a protocol to fabricate organic thin film solar cells using a mini-slot die coater and related in-line structure characterizations using synchrotron scattering techniques.

Tags

Printing FabricationBulk Heterojunction Solar CellsIn Situ Morphology CharacterizationOrganic Thin Film Solar CellsSolvent EvaporationFunctional Thin FilmsThin Film Solar CellsPolymer CoatingsMorphology EvolutionThin Film Organic PhotovoltaicsPEDOT:PSSIndium-tin-oxide SubstrateMini-slot Die CoaterPrinting HeadLinear ManipulatorTwo-dimensional Tilting ManipulatorForce SensorOPV InkSyringe PumpSlot Die Printer

Article

Embed

AGGIUNGI ALLA PLAYLIST

Usage Statistics

Video correlati

Simulation, Fabrication and Characterization of THz Metamaterial Absorbers

Fabrication And Characterization Of Photonic Crystal Slow Light Waveguides And Cavities

Patterning via Optical Saturable Transitions – Fabrication and Characterization

Integration of Light Trapping Silver Nanostructures in Hydrogenated Microcrystalline Silicon Solar Cells by Transfer Printing

Fabrication and Operation of Acoustofluidic Devices Supporting Bulk Acoustic Standing Waves for Sheathless Focusing of Particles

Fabrication and Characterization of Superconducting Resonators

Digital Printing of Titanium Dioxide for Dye Sensitized Solar Cells

Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer

In Situ Monitoring of the Accelerated Performance Degradation of Solar Cells and Modules: A Case Study for Cu(In,Ga)Se2 Solar Cells

Developing High Performance GaP/Si Heterojunction Solar Cells

Read Article