繁殖と離乳の基本

JoVE Educazione Scientific
Lab Animal Research
È necessario avere un abbonamento a JoVE per visualizzare questo.  Accedi o inizia la tua prova gratuita.
JoVE Educazione Scientific Lab Animal Research
Fundamentals of Breeding and Weaning

34,198 Views

13:54 min

April 30, 2023

Panoramica

Source: Kay Stewart, RVT, RLATG, CMAR; Valerie A. Schroeder, RVT, RLATG. University of Notre Dame, IN

Millions of mice and rats are bred for use in biomedical research each year. Worldwide, there are several large commercial breeding facilities that supply mice to research laboratories, but many facilities choose to also breed mice and rats in-house to reduce costs and increase research options. When breeding in the animal facility, researchers are able to manipulate the genetics of the animals, time the pregnancies to meet the needs of the research, and work with embryos and neonates as required.

Mice and rats can be bred in a variety of schemes and methods. Technical procedures, such as the use of vaginal cytology, visualization of the vaginal area, and observation of copulatory plugs, have been developed to assist with the synchronization of breeding to correspond to research requirements. This manuscript is an overview of the basic fundamentals of mouse and rat breeding and technical procedures used. More detailed descriptions of the complex breeding schemes, and the full description of the methods for vaginal cytology, are available in the list of references.

Principi

Common Types of Strains and Stocks

Mice and rats are commonly bred as outbred stocks, inbred strains, and hybrid strains. Outbred animals have similar characteristics, yet are not identical genetically. They are randomly bred to maintain heterozygosity or genetic variance. In contrast, inbred animals have been crossbred with at least 20 generations of brother-sister or parent-offspring mating and are genetically homozygous. Finally, hybrid animals are the offspring of the mating of two inbred strains.

Factors Affecting Breeding Behavior

There are many factors that can influence the breeding performance of mice and rats. The vigor of female breeders largely depends on the level of inbreeding. Animals that are outbred are much hardier and more vigorous, thus they produce larger and stronger litters. Some commonly used strains, such as the C57BL/6 mouse, display aggressive behaviors that can interfere with breeding. When breeding an aggressive strain, all litters should be closely watched. Animals from a litter containing aggressive pups should not be used for breeding. Temperature, humidity, and lighting fluctuations can cause decreases in breeding efficiency. Noise and vibrations within the breeding rooms have also been shown to cause deleterious effects. Control of these variables within the breeding facility will minimize some effects.1 Animals with genetic modifications tend to be less hardy and fertile, and some of the mutations may result in lethality of the pups before or soon after birth.

Reproduction Schemes

Reproduction schemes are similar for mice and rats. Systems commonly used are monogamous mating of one female bred to one male or polygamous mating of two or more females bred to one male. Both the female mouse and rat are polyestrous and undergo a postpartum estrus approximately 20-24 h after parturition. During postpartum estrus, the female can conceive a litter. For strains of mice or rats that have a short breeding life span due to a genetic mutation, it is common to leave the male in the cage with the female so that she can immediately conceive another litter. This intensive breeding scheme can be stressful to the female, as she is continually lactating and gestating. A nonintensive scheme involves the separation of the female once she is visibly pregnant; she is not returned to the male's cage until her litter has been weaned. This system is much less demanding on the female.

Breeding for Genetic Manipulation Purposes

Genetically engineered animals (GEAs) are either knockout animals that have had genes removed from their genome or transgenic animals that have had genes from a different species added into their genome. The GEAs are then bred as an inbred strain and are often bred with other GEAs to create a complex, genetically-manipulated animal for very specific research projects. Complex breeding schemes are used to create strains with some genes removed and others added. Animal models for many gene-related disorders-including, but not restricted to, Alzheimer's disease, cancer, stroke and other blood disorders, diabetes, and retinal pigmentos-have been developed through genetic engineering of animals.

Most breeding schemes can rely on Mendelian genetics to make predictions on genotype ratios. When a wildtype mouse is bred with a mouse with one modified gene (a heterozygote), the expected results would be 50% wildtype animals and 50% heterozygotes. A wildtype mouse crossed with a mouse with two modified genes (a homozygote) will result in all offspring being heterozygotes. When two heterozygous animals are crossed, all three genotypes should be present in the following percentages: 25% wildtype, 50% heterozygotes, and 25% homozygotes. It is from these expectations that embryonic lethal genes can be detected (i.e., if there are no homozygote offspring produced).

Figure 1
Figure 1. Possible matings and outcomes based on Mendelian genetics. Wildtype animals are not genetically modified and are designated as (+/+). Heterozygous animals have one copy of a modified gene and are designated as (-/+); homozygous animals have both copies of a gene modified and are designated as (-/-).

Procedura

1. Information needed when pairing animals includes strain/stock of the animal utilizing proper nomenclature, dates of birth for the breeder male and female, and the setup date. Accurate recordkeeping is imperative with breeding colonies.

2. Sex determination of mice and rats is done by comparing the anogenital distances. In females, the distance between the anus and the external genitalia is shorter than it is for males. The presence of a scrotal sac in male animals is another sex indicator.

3. Selecting and setting up the mating scheme

NOTE: There are two mating schemes that can be used.

  1. Proestrus/estrus timed mating: This method relies on paring females with males at the point of maximum receptivity and fertility.
    1. The estrous cycle must be monitored in the females either by visual examination of the external genitalia for changes that are indicative of proestrus and estrous, or by cytology of vaginal secretions (see below).
    2. When a female is determined to be in proestrus or estrus, she is paired with a male at the end of the day, as the animals generally mate at night.
    3. The following morning, the female is examined for a copulatory plug (see below). If no plug is present, the female can remain with the male during the day and checked for a copulatory plug at the end of the day. Alternatively, if it is determined that she is no longer in proestrus or estrus, she is removed from the breeding cage.
  2. Random timed mating: This method is based on the fact the estrous cycle of rodents is very short, 4-5 days long.
    1. For this method, matings can be set up anytime, and the females are then checked for copulatory plugs every morning and evening until a plug is observed.
    2. A female is paired with a male in the evening.
    3. She is checked for a copulatory plug at the beginning and end of each day until a plug is observed. It commonly takes 3 or more days for a plug to be seen when using this method.

4. Predicting pregnancy

Since palpation of pups is difficult until later during pregnancy, around day 10-12, commercial ultrasound systems for rodents have been developed; however, few animal research facilities have this technology. Therefore, visualization of copulatory plugs, observation of vaginal changes, or vaginal cytology are commonly used to assist with the prediction of when a female has conceived a litter (see below). However, none of these methods are able to confirm pregnancy. Once a copulatory plug is observed, the female should be monitored for signs of pregnancy, such as weight gain.

5. Determining the estrous cycle stage

  1. Visual Inspection
    NOTE: For timed mating of mice and rats, visual observation of the vagina for changes that are indicative of proestrus and estrus is the quickest method to determine the estrous cycle stage, and it requires no special equipment.
    1. When evaluating the estrous cycle using the visual method, it is important to perform the visual inspection in the same area with respect to room lighting, as the light source can change the perceived color of vaginal tissues and make evaluation difficult. For example, the purple hue cast by LED lights makes visual detection more difficult.
    2. To evaluate the stage of the estrous cycle by visual observation, each mouse must be manually restrained by the tail, with the forepaws resting on a cage lid.
    3. The vaginal opening of each female is evaluated based on the condition of the tissue surrounding the vaginal area and the size of the vaginal opening.2
      1. During proestrus, the vaginal opening is wide and is characterized by swelling of the surrounding tissue. The tissue is pink in color and very moist. Often there are wrinkles or striations along the dorsal and ventral edges of the opening.
      2. During estrus, the swelling of the tissues surrounding the vaginal opening is reduced, and the tissues are not as moist and pink.
      3. During metestrus the vaginal opening is minimal and there is negligible swelling.
      4. During diestrus, there is no swelling of the tissues around the vaginal area, and the vaginal opening is small and closed.
  2. Vaginal cytology
    As both mice and rats are polyestrous, the estrus cycle length is very short, ranging from 4-5 days. It is sometimes necessary to identify all four stages of estrous: proestrus, estrus, metestrus, and diestrus. Vaginal cytology is a very accurate method to determine these stages. There are also two methods of sample collection: the noninvasive method of vaginal lavage, and the invasive method of vaginal canal swabbing.
    1. Vaginal lavage
      1. Materials needed are sterile 200 µl pipettes tips, latex bulbs, sterile double distilled water (ddH20), and clean glass slides.
      2. Place a latex bulb on the end of a sterile 200 µl tip. Draw up approximately 100 µl of sterile ddH2O into the pipette.
      3. Lift the mouse out of the cage, and place her on the wire bar cage top with her tail towards you.
      4. Firmly grasp the tail and elevate the hindquarters of the mouse. The mouse will now have only the front paws grasping the lid.
      5. If the mouse urinates, wait until urination stops. Should there be urine left at the entrance to the vaginal canal, the opening can be rinsed with a small squirt of ddH2O. Change the tip that was used for rinsing.
      6. Place the end of the ddH2O-filled tip at the opening of the vaginal canal without penetrating the orifice.
      7. Gently depress the bulb to expel a quarter to half of the volume of water (~25-50 µl) at the opening of vaginal canal. The liquid will spontaneously aspirate into the canal without tip insertion. Slowly release the pressure exerted on the bulb. The fluid will withdraw back into the tip.
      8. Avoid releasing pressure too quickly to prevent aspiration of fluid into the bulb. A filtered tip may be useful for this purpose.
      9. Repeat the previous step 4-5 times using the same tip, bulb, and fluid to obtain a sufficient number of cells in a single sample.
      10. Place the fluid on glass slide, and allow the smear to completely dry at room temperature.
      11. Use a new pipette for each mouse.
      12. Once dry, these estrous smears can be stained immediately or stored and stained at a later date. Wright-Giemsa staining is most commonly used to stain the slides. This stain is available commercially as a one-step stain that does not require fixation of the slide to prevent cells from washing off during the staining process. The slide is placed in the stain for 45-60 seconds, as per the manufacturer's instructions.
      13. The slides are then examined under a microscope, and the cells seen correspond to the stage of the cycle: 1) if the female is in proestrus, the cells are seen as clusters of round, well-formed nucleated epithelial cells with a nucleus that stains darker than the cytoplasm; 2) if the female is in estrus, the majority of the cells are cornified squamous epithelial cells that lack a nucleus, are angular in appearance, and occur in densely packed clusters; 3) if the female is in metestrus, the cells are typically white blood cells (specifically neutrophils with some cornified squamous epithelial cells present) with darkly-stained nuclei that are shaped like two sausages linked together; 4) during diestrus, the cells present are normally white blood cells with the occurrence of a few nucleated epithelial cells..
    2. Vaginal swabbing
      1. Materials needed are sterile cotton-tipped applicators with a 2 mm diameter tip, clean glass microscope slides, and sterile physiological saline.
      2. Wet a cotton-tipped applicator with saline.
      3. Insert the tip of the applicator into the vagina of the restrained mouse.
      4. Gently turn and roll the tip against the vaginal wall. Carefully remove the swab.
      5. Cells are transferred to a dry glass slide by rolling the swab across the slide.
      6. Once the slide is dry, it can be stained with Wright-Giemsa stain.
        Swabbing is considered a stressful procedure, and-when stressed-mice can have disrupted estrous cycles. Vaginal and cervical stimulation caused by swabbing can induce pseudopregnancy. Repeated swabs of the vaginal mucosa can cause damage if not performed gently, with proper restraint, and with the correct-sized cotton swabs.3,4

Figure 2
Figure 2. Vaginal cytology — different stages of rodent estrus cycle

6. Visualizing a copulatory plug

This plug consists of vaginal fluid and semen, and persists in the vagina for 12-24 h postcopulation. The presence of the plug confirms mating, but does not guarantee that the female is pregnant. If the plugged female is pregnant, the first day of gestation is considered to be the day after the plug is found.

  1. Lift the mouse out of the cage and place her on the wire bar cage top with her tail towards you.
  2. Position the mouse by applying pressure just above the tail to arch the back to allow better presentation of the vaginal opening.
  3. Observe her vaginal opening for a whitish mass. The copulatory plug may not be visually obvious but can be confirmed with the use of a blunt probe.
  4. Using the tip of the probe, gently insert it into the vaginal opening. The presence of a copulatory plug will impede the advancement of the probe within 0.5 cm of the vaginal opening.
  5. The probe must be disinfected with alcohol and dried completely before each use.

As the female has litters, the date of birth, the litter size, the number born, the number weaned, the ratio of male:female pups, and the ratio of the genotypes should all be recorded. If the genotypes within a litter do not correspond to the genotypes of the parents, retesting must be done to verify the true genotype.

7. Weaning

Gestation for mice and rats is approximately 21 days. The young are weaned at 21-28 days of age. Both mice and rats can breed as early as 8 weeks of age, thus it is imperative that the pups are separated by gender at an early age. Intensive breeding requires that the pups of each litter be weaned at day 20 to prevent the older pups from being present when the next litter is born. For nonintensive breeding, the pups can be left with the mother past 20 days of age, often up to 28 days of age. This can be very beneficial for many genetically modified strains, as the pups may not be as vigorous as nonengineered or wildtype animals.

Male and female pups are separated at weaning. Whenever possible, newly weaned pups should not be housed singly. If a litter contains only one pup of a given sex, attempts should be made to house this pup with others of the same gender. Possible housing options are: 1) a single female pup may remain with the mother if not in an intensive breeding cage; 2) a single female or male pup may be placed with other same-gender pups from a different litter of the same age; 3) if the parents are a monogamous pair, the female can be removed from the cage to allow a single male pup to be housed with the father; and 4) a single male pup may be housed with female siblings up to 5 weeks of age. The gender of pups should be verified one week postweaning to prevent unwanted litters from improperly segregated pups.

Weanling mice and rats should be checked daily to assure that they are thriving. Although the Guide for the Care and Use of Laboratory Animals5 states that food must be presented to the animals in such a way to prevent it from being soiled by feces and urine, newly weaned mice should be provided a small amount of food (one pellet per mouse) placed in a glass dish (petri dish) on the cage floor. This will encourage the animals to transition to having rodent chow as their sole food source. Even for animals that are housed on racks that provide water to the cages through an automatic watering system, a water bottle can be added to the cage if the mice appear to be dehydrated.

Name Colony Type Description
ICR Outbred Albino
Swiss-Webster Outbred Albino
Balb/c Inbred Albino
FVB Inbred Albino
C57BL/6 Inbred Black coat color
C3H Inbred Brown coat color
DBA/2 Inbred Brown/grey coat color
Athymic nudes (nu/nu) Inbred Hairless
SCID Inbred Severe combined immune-deficient mice-various coat colors

Table 1. Commonly used mouse stains and stocks.

Name Colony Type Description
Sprague-Dawley Outbred Albino
Wistar Outbred Albino
Fisher 344 Inbred Albino
Lewis Inbred Albino
Long Evans Inbred Hooded, black and white

Table 2. Commonly used rat strains and stocks.

Millions of mice and rats are bred for use in biomedical research every year, and many institutions choose to this in-house to reduce costs and increase research options. The advantages of in-house breeding are, 1) researchers are able to manipulate the genetics of the animals through selective breeding 2) they can time pregnancies to meet research needs, and 3) they can work with embryos and neonates as necessary. However, to setup a successful breeding scheme, one should understand the rodent estrous cycle. In addition, they should have knowledge about the different mating schemes, the factors affecting rodent breeding behavior and the weaning considerations…all of which will be discussed in this video presentation.

Let's begin with review of the rodent estrous cycle. Both female rats and mice are polyestrous, meaning they have more than one estrus cycle in a year or a breeding season. Each cycle lasts for 4-5 days and can be divided into 4 stages: metestrus, diestrus, proestrus, and estrus. Estrus is the ovulatory phase, which means that if the female is in the proestrus or the estrus phase, she is ready to conceive.

One way to determine the estrous cycle stage is by visual examination. Manually restrain the animal by the tail and with the forepaws resting on a cage lid and carefully inspect the size of the vaginal opening and the surrounding tissue. During the proestrus phase, the vaginal opening is wide and is characterized by swelling of the surrounding tissue, which is pink in color and very moist. Often there are wrinkles or striations along the dorsal and ventral edges of the opening. During the estrus, the swelling surrounding the vaginal opening is reduced and the tissues are not as moist and pink. During the metestrus, the vaginal opening is minimal and there is negligible swelling. During diestrus, there is no swelling of the tissues around the vaginal area and the opening is small or closed.

Another, more accurate approach for determining the estrous cycle stage is vaginal cytology for which cell samples are collected by either lavage or swabbing. For lavage, place a latex bulb on the end of a sterile 200-microliter tip and draw up approximately 100 microliters of sterile double distilled water into the pipette. Next, lift the mouse out of the cage and place her on the wire bar cage top with her tail towards you. Firmly grasp the tail and elevate the hindquarters of the mouse such that only the front paws are grasping the lid. Place the end of the filled tip at the opening of the vaginal canal without penetrating the orifice. Gently depress the bulb to expel approximately 25-50 microliters of water at the vaginal opening. The liquid will spontaneously aspirate into the canal without tip insertion. Slowly release the pressure exerted on the bulb and the fluid will withdraw back into the tip. Repeat 4-5 times using the same tip, bulb, and fluid to obtain a sufficient number of cells in a single sample. Place the fluid on glass slide, and allow the smear to completely dry at room temperature. Once dry, these estrous smears can be stored for later use, or they can be stained immediately using the Wright-Giemsa stain, which is a one-step stain and does not requiring fixation. The slide is placed in the stain for 45 to 60 seconds.

On the other hand, for swabbing, wet a 2 mm cotton-tipped applicator with saline. Insert the tip of the applicator into the vagina of the restrained mouse and gently turn and roll the tip against the vaginal wall. Then remove the swab carefully and transfer the cells to a dry glass slide by rolling the swab across the slide. This procedure is considered stressful and can cause damage if not performed gently, with proper restraint, and with the correct sized cotton swabs. Like lavage, once the slide is dry, it can be stained with the Wright-Giemsa stain. Following staining, the slides can be examined under a microscope.

If the female is in proestrus, the cells are seen as clusters of round, well-formed, nucleated epithelial cells with a nucleus that stains darker than the cytoplasm. If she is in estrus phase, the majority of the cells are cornified squamous epithelial cells that lack a nucleus. They are angular in appearance and are in densely packed clusters. If the female is in metestrus, the cells are typically white blood cells, specifically neutrophils, with some cornified squamous epithelial cells present. During diestrus, the cells present are normally white blood cells with the occurrence of a few nucleated epithelial cells.

Now that you have an understanding of the rodent estrous cycle, let's discuss how to set-up mating. First step is determination of the sex, which is done by comparing the anogenital distances. In females, the distance between the anus and the external genitalia is shorter than it is for the males. Based on research needs and the strain's breeding efficiency, the mating scheme can be monogamous — where one female is bred to one male OR polygamous — where two or more females are bred to one male.

In terms of timing, given that the rodent estrous cycle is short-only 4-5 days long-one can set up mating randomly. Or they can set up "timed mating", which involves introducing female to the mating cage when she is at the point of maximum receptivity and fertility-that is during the proestrus or the estrus phase. In either case, the mating should be set up at the end of a day, as rodents are nocturnal and tend to mate at night. The following morning, the female is examined for a copulatory plug – a whitish mass consisting of vaginal fluid and semen that persists for 12-24 hours post-copulation. If the copulatory plug is not visually obvious, gently insert the tip of a blunt probe into the vaginal opening. The presence of a copulatory plug will impede the advancement of the probe within 0.5 cm of the vaginal opening. In case of random mating, copulatory plug appearance commonly takes three days. The presence of a plug confirms mating does not guarantee that the female is pregnant.

Once a copulatory plug is observed, the female should be monitored for signs of pregnancy such as weight gain. If the plugged female is pregnant, then the day the plug was found is embryonic day zero or E0 and the next day is considered as the first day of gestation, or E1, and so on right up to parturition-that is giving birth-which is between 19 to 21 days. Approximately 20-24 hours post partum, both female rats and mice undergo an estrus and can conceive again.

In an intensive breeding scheme, which is commonly used for animals with a short breeding life span due to a genetic mutation, the male animals are left in the cage with the female and pups, so that the female can conceive another litter immediately. This scheme can be stressful to the female as she is continually lactating and gestating. On the contrary, the non-intensive breeding scheme, involves separating the female once she is visibly pregnant, and not returning her to the male's cage until her litter has been weaned, making this a less demanding breeding scheme.

There are many factors that can influence the breeding performance of mice and rats. Let's review some of them, which come up more frequently. The vigor of female breeders largely depends on the level of inbreeding. Animals that are outbred are much more hardy and vigorous, thus they produce larger and stronger litters. Another factor that can affect breeding performance is aggressive behavior. Some commonly used strains, such as C57BL/6 mice, have a tendency to display aggression, which can interfere with breeding. When breeding an aggressive strain, all litters should be closely watched. Animals from a litter containing aggressive pups should not be used for breeding. Temperature, humidity, and lighting fluctuations can cause decreases in breeding efficiency. Noise and vibrations within the breeding rooms have also been shown to cause deleterious effects. Animals with genetic modifications tend to be less hardy and fertile, and some of the mutations may result in lethality of the pups before or soon after birth.

Now let's briefly review how to wean pups of these lab animals. The time to start weaning differs with the breeding scheme. In case of non-intensive breeding, the young may be weaned at 21-28 days of age. But in case of intensive breeding, the pups of each litter are weaned at day 20 to prevent the older pups from being present when the next litter in born. Since rodents can begin mating as young as 8 weeks, male and female pups are separated at weaning. Whenever possible, newly weaned pups should not be housed singly.

If a litter contains only one pup of a given sex, attempts should be made to house this pup with pups of the same gender from another litter. The possible housing options for weaning pups are listed in the manuscript below. Weanling mice and rats should be checked daily to assure that they are thriving. For food supply, a small amount of food, one pellet per mouse, should be placed on the cage floor for the first 7-10 days, with additional food in the cage top. This will encourage the animals to transition to having rodent chow as their sole food source. For water supply, a bottle should be added even if the animals are housed on racks with automatic watering system. This is to prevent dehydration.

Lastly, let's see how scientists are using the in-house breeding approach to their advantage. One of the most common applications of setting up mating is to develop mice with altered genotype. To study a gene's function, researchers often disrupt its genetic code. However, these animals like humans are diploid and thus have two copies of the same gene. Therefore, in order to disrupt the gene completely, the altered mice need to be bred to produce an animal with both copies dysfunctional, in other words a homozygous knockout. Mice with one copy dysfunctional are called heterozygous or hets.

The other advantage of setting up in-house mating is testing the effect of prenatal exposure to test compounds. For example, here researchers provided pregnant female a liquid diet containing alcohol from E7 to E13. Then on E13, they dissected the pregnant female, obtained fetal brains, and sliced them into thin sections. Lastly, staining of the slides revealed that prenatal alcohol exposure increased cell death in the neural tissue.

Finally, in-house breeding also allows for the study of post pregnancy disorders like postpartum depression. In this study, scientists first moved the litter away from the dam during the lactating period. Then, 60 minutes later, reintroduced the pups to the dam. And to induce stress in the female, added a novel male intruder to the cage. Then, the researchers observed the dam for maternal aggression, which includes attacking and biting of the intruder male as well as for different maternal care behaviors like pup grooming, and nursing. The data obtained revealed that stress has a significant effect on both postpartum maternal aggression and care.

You've just watched JoVE's video on fundamentals of breeding and weaning mice and rats in the laboratory. You should now have a better understanding of the rodent estrus cycle and also know how to determine the cycle stage and how to use it to set-up successful mating schemes. We also reviewed the factors that can affect the breeding behavior, and explained how and when to wean mice and rat pups. As always, thanks for watching!

Applications and Summary

In-house breeding colonies offer flexibility to research, especially with projects that utilize embryos or neonates. Using techniques such as timed mating with copulatory plugs and vaginal cytology, the date of conception and gestation can be more accurately predicted. This allows researchers to more carefully plan their experiments. Controlling environmental factors such as light cycles, temperature, humidity, and vibrations will optimize the breeding outcomes.

Riferimenti

  1. Breeding Strategies for Maintaining Colonies of Laboratory Mice. A Jackson Laboratory Resource Manual. http://ko.cwru.edu/info/breeding_strategies_manual.pdf.
  2. Byers, S. L., Wiles, M. V., Dunn, S. L., and Taft, R. A. 2012. Mouse estrous cycle identification tool and images. PloS One. 7, 1-5.
  3. McLean, A. C., Valenzuela, N., Fai, S., Bennett, S. A. L. 2012. Performing vaginal lavage, crystal violet staining, and vaginal cytological evaluation for mouse estrous cycle staging identification. J. Vis. Exp. 67, e4389. doi:10.3791/4389.
  4. Mamrot, J., Pangestu, M., Walker, D., Gardner, D. K., and Dickerson, H. 2015. Confirmed dioestrus in pseudopregnant mice using vaginal exfoliative cytology improves embryo transfer implantation rate. Reproductive BioMedicine Online. 31. 538-543.
  5. Institute for the Laboratory Animal Research. 2011. Guide for the care and use of laboratory animals, 8th ed. Washington (DC): National Academies Press.

Trascrizione

Millions of mice and rats are bred for use in biomedical research every year, and many institutions choose to this in-house to reduce costs and increase research options. The advantages of in-house breeding are, 1) researchers are able to manipulate the genetics of the animals through selective breeding 2) they can time pregnancies to meet research needs, and 3) they can work with embryos and neonates as necessary. However, to setup a successful breeding scheme, one should understand the rodent estrous cycle. In addition, they should have knowledge about the different mating schemes, the factors affecting rodent breeding behavior and the weaning considerations…all of which will be discussed in this video presentation.

Let’s begin with review of the rodent estrous cycle. Both female rats and mice are polyestrous, meaning they have more than one estrus cycle in a year or a breeding season. Each cycle lasts for 4-5 days and can be divided into 4 stages: metestrus, diestrus, proestrus, and estrus. Estrus is the ovulatory phase, which means that if the female is in the proestrus or the estrus phase, she is ready to conceive.

One way to determine the estrous cycle stage is by visual examination. Manually restrain the animal by the tail and with the forepaws resting on a cage lid and carefully inspect the size of the vaginal opening and the surrounding tissue. During the proestrus phase, the vaginal opening is wide and is characterized by swelling of the surrounding tissue, which is pink in color and very moist. Often there are wrinkles or striations along the dorsal and ventral edges of the opening. During the estrus, the swelling surrounding the vaginal opening is reduced and the tissues are not as moist and pink. During the metestrus, the vaginal opening is minimal and there is negligible swelling. During diestrus, there is no swelling of the tissues around the vaginal area and the opening is small or closed.

Another, more accurate approach for determining the estrous cycle stage is vaginal cytology for which cell samples are collected by either lavage or swabbing. For lavage, place a latex bulb on the end of a sterile 200-microliter tip and draw up approximately 100 microliters of sterile double distilled water into the pipette. Next, lift the mouse out of the cage and place her on the wire bar cage top with her tail towards you. Firmly grasp the tail and elevate the hindquarters of the mouse such that only the front paws are grasping the lid. Place the end of the filled tip at the opening of the vaginal canal without penetrating the orifice. Gently depress the bulb to expel approximately 25-50 microliters of water at the vaginal opening. The liquid will spontaneously aspirate into the canal without tip insertion. Slowly release the pressure exerted on the bulb and the fluid will withdraw back into the tip. Repeat 4-5 times using the same tip, bulb, and fluid to obtain a sufficient number of cells in a single sample. Place the fluid on glass slide, and allow the smear to completely dry at room temperature. Once dry, these estrous smears can be stored for later use, or they can be stained immediately using the Wright-Giemsa stain, which is a one-step stain and does not requiring fixation. The slide is placed in the stain for 45 to 60 seconds.

On the other hand, for swabbing, wet a 2 mm cotton-tipped applicator with saline. Insert the tip of the applicator into the vagina of the restrained mouse and gently turn and roll the tip against the vaginal wall. Then remove the swab carefully and transfer the cells to a dry glass slide by rolling the swab across the slide. This procedure is considered stressful and can cause damage if not performed gently, with proper restraint, and with the correct sized cotton swabs. Like lavage, once the slide is dry, it can be stained with the Wright-Giemsa stain. Following staining, the slides can be examined under a microscope.

If the female is in proestrus, the cells are seen as clusters of round, well-formed, nucleated epithelial cells with a nucleus that stains darker than the cytoplasm. If she is in estrus phase, the majority of the cells are cornified squamous epithelial cells that lack a nucleus. They are angular in appearance and are in densely packed clusters. If the female is in metestrus, the cells are typically white blood cells, specifically neutrophils, with some cornified squamous epithelial cells present. During diestrus, the cells present are normally white blood cells with the occurrence of a few nucleated epithelial cells.

Now that you have an understanding of the rodent estrous cycle, let’s discuss how to set-up mating. First step is determination of the sex, which is done by comparing the anogenital distances. In females, the distance between the anus and the external genitalia is shorter than it is for the males. Based on research needs and the strain’s breeding efficiency, the mating scheme can be monogamous — where one female is bred to one male OR polygamous — where two or more females are bred to one male.

In terms of timing, given that the rodent estrous cycle is short-only 4-5 days long-one can set up mating randomly. Or they can set up “timed mating”, which involves introducing female to the mating cage when she is at the point of maximum receptivity and fertility-that is during the proestrus or the estrus phase. In either case, the mating should be set up at the end of a day, as rodents are nocturnal and tend to mate at night. The following morning, the female is examined for a copulatory plug – a whitish mass consisting of vaginal fluid and semen that persists for 12-24 hours post-copulation. If the copulatory plug is not visually obvious, gently insert the tip of a blunt probe into the vaginal opening. The presence of a copulatory plug will impede the advancement of the probe within 0.5 cm of the vaginal opening. In case of random mating, copulatory plug appearance commonly takes three days. The presence of a plug confirms mating does not guarantee that the female is pregnant.

Once a copulatory plug is observed, the female should be monitored for signs of pregnancy such as weight gain. If the plugged female is pregnant, then the day the plug was found is embryonic day zero or E0 and the next day is considered as the first day of gestation, or E1, and so on right up to parturition-that is giving birth-which is between 19 to 21 days. Approximately 20-24 hours post partum, both female rats and mice undergo an estrus and can conceive again.

In an intensive breeding scheme, which is commonly used for animals with a short breeding life span due to a genetic mutation, the male animals are left in the cage with the female and pups, so that the female can conceive another litter immediately. This scheme can be stressful to the female as she is continually lactating and gestating. On the contrary, the non-intensive breeding scheme, involves separating the female once she is visibly pregnant, and not returning her to the male’s cage until her litter has been weaned, making this a less demanding breeding scheme.

There are many factors that can influence the breeding performance of mice and rats. Let’s review some of them, which come up more frequently. The vigor of female breeders largely depends on the level of inbreeding. Animals that are outbred are much more hardy and vigorous, thus they produce larger and stronger litters. Another factor that can affect breeding performance is aggressive behavior. Some commonly used strains, such as C57BL/6 mice, have a tendency to display aggression, which can interfere with breeding. When breeding an aggressive strain, all litters should be closely watched. Animals from a litter containing aggressive pups should not be used for breeding. Temperature, humidity, and lighting fluctuations can cause decreases in breeding efficiency. Noise and vibrations within the breeding rooms have also been shown to cause deleterious effects. Animals with genetic modifications tend to be less hardy and fertile, and some of the mutations may result in lethality of the pups before or soon after birth.

Now let’s briefly review how to wean pups of these lab animals. The time to start weaning differs with the breeding scheme. In case of non-intensive breeding, the young may be weaned at 21-28 days of age. But in case of intensive breeding, the pups of each litter are weaned at day 20 to prevent the older pups from being present when the next litter in born. Since rodents can begin mating as young as 8 weeks, male and female pups are separated at weaning. Whenever possible, newly weaned pups should not be housed singly.

If a litter contains only one pup of a given sex, attempts should be made to house this pup with pups of the same gender from another litter. The possible housing options for weaning pups are listed in the manuscript below. Weanling mice and rats should be checked daily to assure that they are thriving. For food supply, a small amount of food, one pellet per mouse, should be placed on the cage floor for the first 7-10 days, with additional food in the cage top. This will encourage the animals to transition to having rodent chow as their sole food source. For water supply, a bottle should be added even if the animals are housed on racks with automatic watering system. This is to prevent dehydration.

Lastly, let’s see how scientists are using the in-house breeding approach to their advantage. One of the most common applications of setting up mating is to develop mice with altered genotype. To study a gene’s function, researchers often disrupt its genetic code. However, these animals like humans are diploid and thus have two copies of the same gene. Therefore, in order to disrupt the gene completely, the altered mice need to be bred to produce an animal with both copies dysfunctional, in other words a homozygous knockout. Mice with one copy dysfunctional are called heterozygous or hets.

The other advantage of setting up in-house mating is testing the effect of prenatal exposure to test compounds. For example, here researchers provided pregnant female a liquid diet containing alcohol from E7 to E13. Then on E13, they dissected the pregnant female, obtained fetal brains, and sliced them into thin sections. Lastly, staining of the slides revealed that prenatal alcohol exposure increased cell death in the neural tissue.

Finally, in-house breeding also allows for the study of post pregnancy disorders like postpartum depression. In this study, scientists first moved the litter away from the dam during the lactating period. Then, 60 minutes later, reintroduced the pups to the dam. And to induce stress in the female, added a novel male intruder to the cage. Then, the researchers observed the dam for maternal aggression, which includes attacking and biting of the intruder male as well as for different maternal care behaviors like pup grooming, and nursing. The data obtained revealed that stress has a significant effect on both postpartum maternal aggression and care.

You’ve just watched JoVE’s video on fundamentals of breeding and weaning mice and rats in the laboratory. You should now have a better understanding of the rodent estrus cycle and also know how to determine the cycle stage and how to use it to set-up successful mating schemes. We also reviewed the factors that can affect the breeding behavior, and explained how and when to wean mice and rat pups. As always, thanks for watching!