This video describes the procedure for biliary system resin casting, for understanding 3D biliary architecture. This technique provides insights into the internal diameter and network connectivity of the biliary system, which could be used for liver regeneration analysis.
Protocol
All procedures involving animal models have been reviewed by the local institutional animal care committee and the JoVE veterinary review board. 1. Double resin injections Preparation Prepare resin solution. For double system resin injections, prepare both yellow and green resins as described in the steps 1.1.2-1.1.4. Prepare 1 mL aliquots of diluted resin per mouse. Yellow Resin: Dilute yellow silicone rubber (hig…
Representative Results
Figure 1: Injection set for resin casting. (A) Injection set #1 comprises a 30 G needle and PE10 tubing that is ~30 cm long. Injection set #2 is composed of a 23 G needle and PE50 tubing ~30 cm long. (B) The tip of the tubing is stretched and cut at an angle to create a beveled tip. The ruler in A and B is a centimeter ruler, with major increments of 1 cm, i…
Biliary System Resin Casting: A Technique for Analyzing 3D Architecture of Biliary System in Murine Model Using Radiopaque Resin Injection. J. Vis. Exp. (Pending Publication), e20788, doi: (2023).