Journal
/
Ingénierie
/
Experimental Protocol to Investigate Particle Aerosolization of a Product Under Abrasion and Under Environmental Weathering
Journal JoVE
Ingénierie
Un abonnement à JoVE est nécessaire pour voir ce contenu.  Connectez-vous ou commencez votre essai gratuit.
Journal JoVE Ingénierie
Experimental Protocol to Investigate Particle Aerosolization of a Product Under Abrasion and Under Environmental Weathering

Experimental Protocol to Investigate Particle Aerosolization of a Product Under Abrasion and Under Environmental Weathering

DOI:
10.3791/53496-v

•

07:47 min

•

September 16, 2016

•

, , ,
1Direction des Risques Chroniques,Institut National de l’Environnement Industriel et des Risques (INERIS), 2Génie des Procédés Industriels,Université de Technologie de Compiègne (UTC)

Chapitres

  • 00:05Titre
  • 00:44Abrasion and Engineered Nanomaterial Aerosols Characterization
  • 04:23Transmission Electron Microscopy (TEM) Analysis of the Liquid Suspensions-Drop Deposition Technique
  • 05:49Results: Analysis of Particle Aerosolization of a Product under Abrasion and Under Environment Weathering
  • 06:57Conclusion

Summary

Traduction automatique

Traduction automatique

In this article, an experimental protocol to investigate particle aerosolization of a product under abrasion and under environmental weathering is presented. Results on the emission of engineered nanomaterials, in the form of aerosols are presented. The specific experimental set-up is described in detail.

Tags

Particle AerosolizationAbrasionEnvironmental WeatheringNanomaterialNanosafetyParticle EmissionProduct LifeExperimental ProtocolParticle CounterAbradantNanostructured ProductAerosol SamplerCopper Mesh GridParticle SourceNormal LoadDead Weights

Article

Embed

AJOUTER À LA PLAYLIST

Usage Statistics

Vidéos Connexes

Measuring Material Microstructure Under Flow Using 1-2 Plane Flow-Small Angle Neutron Scattering

High-Sensitivity Nuclear Magnetic Resonance at Giga-Pascal Pressures: A New Tool for Probing Electronic and Chemical Properties of Condensed Matter under Extreme Conditions

A Testing Platform for Durability Studies of Polymers and Fiber-reinforced Polymer Composites under Concurrent Hygrothermo-mechanical Stimuli

Development of an Experimental Setup for the Measurement of the Coefficient of Restitution under Vacuum Conditions

Using Synchrotron Radiation Microtomography to Investigate Multi-scale Three-dimensional Microelectronic Packages

Three-dimensional Particle Tracking Velocimetry for Turbulence Applications: Case of a Jet Flow

In Situ Visualization of the Phase Behavior of Oil Samples Under Refinery Process Conditions

A Novel Biaxial Testing Apparatus for the Determination of Forming Limit under Hot Stamping Conditions

Experimental Protocol to Determine the Chloride Threshold Value for Corrosion in Samples Taken from Reinforced Concrete Structures

Measurements of Waves in a Wind-wave Tank Under Steady and Time-varying Wind Forcing

Read Article