Methods to Quantify Pharmacologically Induced Alterations in Motor Function in Human Incomplete SCI

To assess the effects of acute oral administration of an SSRI (10 mg escitalopram oxalate, Lexapro, Forest Pharmaceuticals, Inc.) on motor activity in individuals with motor incomplete SCI, a double-blinded, randomized, placebo controlled crossover design is employed. As part of the inclusion criteria, subjects will be required to undergo a 14 day washout period for all anti-depressant medications, anti-spastic medications and other medications with known interactions to the SSRIs.

Two hours is required for each of the experimental protocols, consisting of clinical, quantitative static and quantitative dynamic assessments. A 4.5 hour delay is given following medication administration (time to peak plasma concentration)⁷. Subjects are re-tested following medication administration using an identical experimental set-up and paradigm employed during pre-medication testing. Following pre- and post-testing of the first medication (SSRI or placebo), a minimum of 7 days separates the two testing conditions (half-life of agents is approximately 27 hrs).

Part 1: Clinical assessments

Modified ashworth

Spasticity of the quadriceps and hamstring muscle groups is quantified using the Modified Ashworth Scale (mAsh).

1. The individual is placed supine on padded mat.
2. Spastic reflexes are graded on a 0-4 scale consisting of whole numbers in addition to a ‘1+’ grade. The criteria for grading is based upon the table below (Table 1).
3. To assess quadriceps spasticity, the patient’s leg is raised off of the mat and fully extended by support under the thigh and ankle, with contralateral leg extended. A stretch is provided to the quadriceps by providing brisk passive flexion about the knee joint. The response to stretch is quantified in accordance to the scale below.
4. To assess hamstring spasticity, the patient’s leg is raised off of the mat and fully flexed by support under the thigh and ankle, with contralateral leg extended. A stretch is provided to the hamstrings by providing brisk passive extension about the knee joint. The response to stretch is quantified in accordance to the scale below.
5. Raw scores are converted to an ordinal scale and summed bilaterally to gain a composite score.

Spinal cord assessment tool for spastic reflexes

The magnitude or duration of flexor spasms, extensor spasms, and clonus is quantified using the Spinal Cord Assessment Tool for Spastic Reflexes (SCATS)

1. The individual is placed supine on padded mat.
2. Spastic reflexes are graded on a 0-3 scale using whole numbers. The criteria for grading are based upon the table below (Table 2).
3. To assess flexor spasms, both legs are fully extended with the patient’s shoes and socks removed. A pin prick is applied for 1 second to the medial arch of the subject’s foot. The magnitude of motion of big toe, knee and hip quantified in accordance to the scale below.
4. To assess extensor spasms, the leg is supported in 90° of hip flexion and 110° of knee flexion, with contralateral leg extended. From this position the leg is briskly extended and laid to rest on the mat. The duration of visible quadriceps activity, noted by superior patella displacement, is quantified in accordance to the scale below.
5. To assess clonus, the lower leg is lifted slightly from the mat and the ankle is placed in neutral to slight plantarflexion, with contralateral leg extended. A stretch to the plantarflexors is delivered via brisk passive dorsiflexion of the ankle. The duration of the clonic bursting is quantified in accordance to the scale below.
6. Scores are summed within and between legs to obtain a composite score.

Lower extremity motor score

The ability for an individual to volitionally contract muscles in accordance with myotomes is assessed using the ASIA Lower Extremity Motor Score (LEMS).

1. The individual is placed supine on padded mat.
2. Strength is graded on a 0-5 scale using whole numbers. The criteria for grading are based upon the table below (Table 3).
3. The hip flexors (L2 myotome) are assessed by having the patient attempt to flex hip from the supine position, and manual resistance is provided as necessary. If the patient is unable to fully move against gravity, the hip is externally rotated to lessen the effects of gravity and hip flexion is attempted again.
4. The knee extensors (L3 myotome) are assessed by having the patient attempt to extend knee from a flex position, pivoting about the examiners forearm, and manual resistance is provided as necessary. If the patient is unable to fully move against gravity, the hip is externally rotated to lessen the effects of gravity and knee extension is attempted again.
5. The ankle dorsiflexors (L4 myotome) are assessed by having the patient attempt to dorsiflex ankle with the leg extended, manual resistance provided as necessary. If the patient is unable to fully move ankle against gravity, the hip is externally rotated to lessen the effects of gravity and ankle dorsiflexion is attempted again.
6. The great toe extensors (L5 myotome) are assessed by having the patient attempt to extend the great toe with the leg extended and the ankle plantarflexed, manual resistance is provided as necessary. If the patient is unable to fully move toe against gravity, the hip is externally rotated to lessen the effects of gravity and great toe extension is attempted again.
7. The ankle plantarflexiors (S1 myotome) are assessed by having the patient attempt to plantarflex with the leg extended with manual resistance is provided as necessary. If patient is unable to move ankle through full range with resistance, the hip and knee are flexed to place the plantar surface of the foot on the mat and the patient is asked to rise up on their toes. If patient is unable to fully rise up on their toes, the hip is externally rotated to lessen the effects of gravity and ankle plantarflexion is attempted again.
8. Lower extremity motor score is calculated by adding results for each muscle group bilaterally.

Part 2: Quantitative static assessments

Velocity dependent stretch reflex

Using isokinetic dynamometers in addition to electromyography (EMG), a precise stretch can be applied and a quantitative response can be assessed.

1. The individual is comfortably seated in testing apparatus (Biodex System 3, Shirley, New York)
2. Surface EMGs are applied to the soleus and medial gastrocnemius.
3. Leg is attached to foot plate coupled to a 6 degree of freedom load cell (ATX Industrial Automation, Apex, NC) and ankle joint axis is aligned to the center of the load cell.
4. With the patient relaxed, single or multiple stretches into dorsiflexion (DF) or plantarflexion (PF) are applied at various rotational speeds including 5, 30, 60 and 120 deg/sec
5. To quantify torque response, torque signals are filtered at 200Hz, sampled at 1000 Hz and synchronized with EMG data. Passive and gravitational torques are obtained from the slow stretch perturbations (5 deg/sec) and subtracted from the rapid stretches to calculate the reflex response. Stretches are segmented for each DF and PF excursion, minimum and maximum torques are identified, and peak torque is defined as the difference in the values.
6. To quantify EMG response, EMG signals are filtered at 20-450Hz, sampled at 1000 Hz, synchronized with torque data. The signal is rectified and smoothed at 10 Hz low-pass using a 4^th order recursive Butterworth filter, and the area of the smoothed signal is calculated for agonist and antagonist for all excursions. For perturbations, EMG is often present following cessation of movement during the final hold position. Integrated EMG area is calculated, starting from the beginning of the final joint rotation extending into the hold phase for up to 3 seconds.

Isometric strength

Precise quantification of volitional strength can be obtained using an isokinetic dynamometer.

1. The individual is comfortably seated in testing apparatus.
2. Surface EMGs are affixed to 6 major muscle groups of each leg including rectus femoris, medial hamsting, vastus lateralis, tibialis anterior, soleus and medial gastrocnemius (Delsys 2.1, Boston, MA). Leg is attached to foot plate coupled to a 6 degree of freedom load cell and knee joint axis is aligned to the center of the load cell.
3. With the patient relaxed, the patient is instructed to generate maximal force. To ensure maximal volitional force production, vigorous verbal encouragement is provided to the patient by the experimenters. When the torque begins to decline, super maximal stimulus is delivered to the agonist (10 pulses, 600 μs duration, 100 Hz, 135 V; S48 Grass, West Warwick, RI) through 3″ x 5″ self-adhesive, gel plate stimulating electrodes (ConMed Corp, Utica, NY). Torque and EMG are collected and conditioned as in the velocity dependent stretch (step 2).
4. Offline
5. To quantify maximal torque response, peak torque of the smoothed signal is found. Maximal torque is defined as the average torque produced ±50ms of peak torque.
6. To quantify EMG response, maximal EMG is calculated as the average signal present 0 to 100ms prior to peak torque.
7. To quantify deficits in volitional activation, the central activation ratio is calculated with Equation 1. In this equation T_voluntary refers to the voluntary torque produced 100 ms before the electrical stimulation and Telectrical refers to the peak electrically elicited torque.⁸

Equation #1

Part 3: Quantitative dynamic assessments

Peak treadmill speed

Functional ambulation is assessed using a graded treadmill test to obtain treadmill speed.

1. Subject is secured on the treadmill (Bertec, Columbus, OH) using an overhead safety harness that does not restrict movement and does not provide body-weight support. A heart rate monitor is affixed. A reflective marker set is applied using the modified Cleveland Clinic template (32 reflective markers). Surface EMGs are affixed to 6 major muscle groups of each leg including rectus femoris, medial hamsting, vastus lateralis, tibialis anterior, soleus and medial gastrocnemious (Noraxon, Scottsdale, Arizona)
2. The subject begins to walk on the treadmill at 0.1 m/s. Speed is speed increased every 2 minutes by 0.1 m/s.
3. The test is terminated under 3 conditions
   1. Volitional fatigue
   2. Gait instability
   3. In accordance to American College of Sports Medicine (ACSM) guidelines ⁹
      1. Rating of perceived exertion=20
      2. Heart rate within 10 beats of predicted maximum
      3. Respiratory exchange ratio=1.15
4. Maximal speed obtained for at least 1 min, is recorded as peak treadmill speed.

Gait kinematics

During treadmill walking multiple kinematic measures including, peak range of motion, peak velocity and variability are assessed using motion capture system (Motion Analysis, Santa Rosa, CA). The consistency of intralimb coordination between the hip and knee joints is quantified by calculating the average coefficient of correspondence (ACC; ¹⁰). The ACC uses a vector coding technique to analyze the sagittal-plane hip and knee angles on an angle-angle plot.

1. Motion capture cameras are calibrated per manufacturers’ recommendations prior to each use. During data collection, data is sampled at 100 Hz from 6 cameras.
2. Offline, the motion capture data is manually tracked for accuracy and an epoch of at least 10 step cycles at the fasted speed obtained in either pre of post SSRI are isolated for analysis.
3. Gait cycle is normalized to percent from heel strike to heel strike and interpolated using a cubic spline for both the hip and the knee angles.
4. Hip knee angle-angle plot is constructed (Figure 3a).
5. The average cosine and sine of hip (x) and knee (y) normalized to vector length (l) respectively for each frame-to-frame interval calculated across all steps isolated for analysis (Equation 1-2).

Equation #2

Equation #3

6. The mean vector for each frame-to-frame interval is calculated using the average frame-to-frame sine and cosine values across all steps isolated for analysis (Equation 3).

Equation #4

7. The mean vector (a), represents the continuous variability of changes in the frame-to-frame interval or the consistency of intralimb coordination between the hip and knee joints over multiple step cycles (Equation 4). When a=1 the cycle is perfectly consistent with values less than 1 indicating progressively less intralimb consistency between steps (Figure 3b).

Equation #5

Muscle activity during ambulation

Muscle activity during gait is quantified using EMG signals.

1. To collect EMG responses, EMG signals are hardware filtered at 20-450Hz, sampled at 1000 Hz, while synchronized with motion capture data.
2. Off line, signals are highpass filtered at 30Hz to remove movement artifact full wave rectified and low-pass filtered at 20 Hz using a 4^th order recursive Butterworth to create a linear envelope. Smoothed EMG signals are normalized to the percent gait cycle and averaged between at least 10 steps at the fasted speed obtained in either pre of post SSRI.
3. Normative values of muscle activity are established using a database of healthy controls to establish normative on times and off times. The table below presents the normative activity of the 6 muscles throughout the gait cycle.
4. Normative on time and off times for each muscle are overlaid on the EMG signals collected from the subject. The integrated area of the on time and off time are calculated. The spasticity index (SI) is calculated through Equation 5 ¹¹. Representative results are shown in Figure 3c.

Equation #6

Metabolic recordings during ambulation

Cardiorespiratory/metabolic capacity is assessed using measures of peak oxygen uptake (VO2_peak; mL/kg/min) during graded treadmill testing using a K4b2 portable metabolic system (Cosmed USA Inc., Chicago IL).

1. Metabolic system is calibrated in accordance with manufacturers’ recommendations and affixed to patient.
2. Baseline measurements of VO2 are obtained in a seated position for a minimum of 2 minutes and then again in a standing position for a minimum of 2 min. An internal user controlled mark on the metabolic system is used to sync events.
3. While walking on the treadmill the VO2 is collected with manual marks provided by the experimenter with increases in speed (every 2 min).
4. After the treadmill test, the data is downloaded to a personal computer for further analysis.
5. VO2 data is analyzed by averaging the last minute of each 2 minute speed epoch and plotted for each speed (Figure 3d).

Figure 1. Following oral administration of SSRI in an individual with motor incomplete SCI there are notable alterations in clinical measures of motor activity. Both measures of involuntary reflex activity, mAsh (A) and SCATS (B) increased to varying degrees, suggesting the two clinical scales may be capturing a different aspect of the augmented involuntary activity. (C) Additionally, clinically detectable changes in volitional strength are observed following SSRI administration.

Figure 2. Following oral administration of SSRI in an individual with motor incomplete SCI there are notable alterations in quantitative static measures of motor activity. (A) Augmented and prolonged ankle plantarflexion torque and EMG are observed in response to repeated stretches of the plantarflexors following SSRI administration. Increased isometric torque is seen following SSRI administration. Interestingly, there is less activation deficit (greater CAR) following SSRI administration, indicating the individual is able to more fully activate their muscle during a maximal volitional contraction following SSRI administration.

Figure 3. Following oral administration of SSRI in an individual with motor incomplete SCI there are alterations in quantitative dynamic measures of motor activity. Analyses of variability of hip and knee kinematics (A) during ambulation using ACC (B) reveals that there is an increased consistency following SSRI medication, both pre and post measures are at 0.7 m/s. (C) Analysis lower extremity EMG activity during ambulation reveals an increase in inappropriate timing of muscle activity following SSRI medication, both pre and post measures are at 0.7 m/s. (D) Analysis of metabolic parameters during ambulation reveals a modest increase in O2 consumption during the graded treadmill test following SSRI administration.

Table 1: mAsh scoring, Modified from ¹²

Table 2: SCATS scoring, Modified from ¹³

Table 3: LEMS scoring

Table 4: Normative on and off times of LE muscles during gait