JOVE JOURNAL

Ingénierie

Showing 301 - 312 in 666 videos.

Generation and Control of Electrohydrodynamic Flows in Aqueous Electrolyte Solutions

Kentaro Doi¹, Fumika Nito¹, Ayako Yano², Ryo Nagura¹, Satoyuki Kawano¹

¹Department of Mechanical Science and Bioengineering, Graduate School of Engineering Science,Osaka University, ²Division of Mechanical Science and Technology, Faculty of Science and Technology,GUNMA University

Journal (Engineering)

A Standard and Reliable Method to Fabricate Two-Dimensional Nanoelectronics

Kristan Bryan C Simbulan¹, Po-Chun Chen^1,2, Yun-Yan Lin^1,2, Yann-Wen Lan^1,2

¹Department of Physics,National Taiwan Normal University, ²National Applied Research Laboratories (NARL),National Nano Device Laboratories (NDL)

Journal (Engineering)

Force-Clamp Rheometry for Characterizing Protein-based Hydrogels

Luai R. Khoury¹, Joel Nowitzke¹, Narayan Dahal¹, Kirill Shmilovich¹, Annie Eis¹, Ionel Popa¹

¹Department of Physics,University of Wisconsin-Milwaukee

Journal (Engineering)

Microparticle Manipulation by Standing Surface Acoustic Waves with Dual-frequency Excitations

Yufeng Zhou¹, Yannapol Sriphutkiat¹

¹School of Mechanical and Aerospace Engineering,Nanyang Technological University

Journal (Engineering)

Three-Dimensional Ultrasonic Needle Tip Tracking with a Fiber-Optic Ultrasound Receiver

Wenfeng Xia^1,2, Simeon J. West³, Malcolm C. Finlay^2,4, Rosalind Pratt^5,6, Sunish Mathews^1,2, Jean-Martial Mari⁷, Sebastien Ourselin^1,2,6, Anna L. David^1,5,8,9, Adrien E. Desjardins^1,2

¹Wellcome/EPSRC Centre for Interventional and Surgical Sciences,University College London, ²Department of Medical Physics and Biomedical Engineering,University College London, ³Department of Anaesthesia,University College Hospital, ⁴St Bartholomew's Hospital and Queen Mary University of London, ⁵Institute for Women's Health,University College London, ⁶Centre for Medical Imaging Computing,University College London, ⁷GePaSud,University of French Polynesia, ⁸Department of Development and Regeneration,KU Leuven (Katholieke Universiteit), ⁹NIHR University College London Hospitals Biomedical Research Centre

Journal (Engineering)

Film Control to Study Contributions of Waves to Droplet Impact Dynamics on Thin Flowing Liquid Films

Idris T. Adebayo¹, Omar K. Matar¹

¹Department of Chemical Engineering,Imperial College London

Journal (Engineering)

Fabrication of Soft Pneumatic Network Actuators with Oblique Chambers

Lisen Ge*^1,2, Tianyu Wang*^1,3, Ningbin Zhang^1,2, Guoying Gu^1,2

¹State Key Laboratory of Mechanical System and Vibration,Shanghai Jiao Tong University, ²Robotics Institute, School of Mechanical Engineering,Shanghai Jiao Tong University, ³University of Michigan-Shanghai Jiao Tong University Joint Institute,Shanghai Jiao Tong University

Journal (Engineering)

Measuring Magnetically-Tuned Ferroelectric Polarization in Liquid Crystals

Hiroki Ueda¹, Takuya Akita², Yoshiaki Uchida², Tsuyoshi Kimura³

¹Division of Materials Physics, Graduate School of Engineering Science,Osaka University, ²Division of Chemical Engineering, Graduate School of Engineering Science,Osaka University, ³Department of Advance Materials Science,University of Tokyo

Journal (Engineering)

Fabrication of Superhydrophobic Metal Surfaces for Anti-Icing Applications

F.J. Montes Ruiz-Cabello¹, Pablo Ibañez-Ibañez¹, Guillermo Paz-Gomez¹, Miguel Cabrerizo-Vilchez¹, Miguel Angel Rodriguez-Valverde¹

¹Biocolloid and Fluid Physics Group, Faculty of Sciences, Applied Physics Department,University of Granada

Journal (Engineering)

A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing

Emma Mogus¹, Benjamin Torres-Kulik¹, Christopher Gustin², Ayse Turak¹

¹Department of Engineering Physics,McMaster University, ²Department of Physics, Engineering Physics and Astronomy,Queen's University

Journal (Engineering)

Conducting Elevated Temperature Normal and Combined Pressure-Shear Plate Impact Experiments Via a Breech-end Sabot Heater System

Bryan Zuanetti¹, Tiaxue Wang¹, Vikas Prakash¹

¹Department of Mechanical and Aerospace Engineering,Case Western Reserve University

Journal (Engineering)

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

Yang Zhang¹, David Bue Pedersen¹, Michael Mischkot¹, Matteo Calaon¹, Federico Baruffi¹, Guido Tosello¹

¹Department of Mechanical Engineering,Technical University of Denmark

1…25 26 27 28 29 30…56