Journal
/
Ingeniería
/
Generating Lap Joints Via Friction Stir Spot Welding on DP780 Steel
JoVE Revista
Ingeniería
Se requiere una suscripción a JoVE para ver este contenido.  Inicie sesión o comience su prueba gratuita.
JoVE Revista Ingeniería
Generating Lap Joints Via Friction Stir Spot Welding on DP780 Steel

Generating Lap Joints Via Friction Stir Spot Welding on DP780 Steel

DOI:
10.3791/58633-v

•

07:18 min

•

August 13, 2019

•

,
1Department of Health and Beauty,Shu Zen College of Medicine and Management, 2Department of Mold and Die Engineering,National Kaohsiung University of Science and Technology

Capítulos

  • 00:04Título
  • 00:54Material Preparation
  • 01:52Friction Stir Spot Welding Procedure
  • 05:20Results: FSSW Process on DP 780 Lap Joints
  • 06:32Conclusion

Summary

Traducción Automática

Traducción Automática

Here, we present a friction stir spot welding (FSSW) protocol on dual phase 780 steel. A tool pin with high-speed rotation generates heat from friction to soften the material, and then, the pin plunges into 2 sheet joints to create the lap joint.

Tags

Keywords: Friction Stir Spot WeldingDP780 SteelLap JointsWeight ReductionAutomotive IndustryAHSSProcess ReliabilityResistance Spot WeldingZ-axial ForcePenetration DepthTool Pin Rotation SpeedDwell TimePlunge RateWork Piece ContaminationMicrofiber FabricsClamping ForceNon-rotating Clamping Ring

Article

Embed

Añadir a la lista de reproducción

Usage Statistics

Videos relacionados

check_url/es/58633?article_type=v

Micropunching Lithography for Generating Micro- and Submicron-patterns on Polymer Substrates
check_url/es/58633?article_type=v

Mechanical Expansion of Steel Tubing as a Solution to Leaky Wellbores
check_url/es/58633?article_type=v

Preparation and Friction Force Microscopy Measurements of Immiscible, Opposing Polymer Brushes
check_url/es/58633?article_type=v

Ultrasonic Welding of Thermoplastic Composite Coupons for Mechanical Characterization of Welded Joints through Single Lap Shear Testing
check_url/es/58633?article_type=v

The Evolution of Silica Nanoparticle-polyester Coatings on Surfaces Exposed to Sunlight
check_url/es/58633?article_type=v

Preparation and High-temperature Anti-adhesion Behavior of a Slippery Surface on Stainless Steel
check_url/es/58633?article_type=v

Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass (ADG) Fresnel Lens for Concentrating Photovoltaics
check_url/es/58633?article_type=v

Preparation of Aligned Steel Fiber Reinforced Cementitious Composite and Its Flexural Behavior
check_url/es/58633?article_type=v

Applicability Analysis of Assessment Methods for Morphological Parameters of Corroded Steel Bars
check_url/es/58633?article_type=v

O-cresol Concentration Online Measurement Based On Near Infrared Spectroscopy Via Partial Least Square Regression

Read Article