Source: Madeline Lassche, MSNEd, RN and Katie Baraki, MSN, RN, College of Nursing, University of Utah, UT
Inhaled medications are prescribed for conditions affecting the bronchi, which branch off of the trachea, and bronchioles, which are progressively smaller conducting airways spread throughout the lung tissue. These conditions can be classified as acute (i.e., temporary, with quick onset) or chronic (i.e., persistent and/or recurrent symptoms lasting months to years). Common acute conditions requiring inhaled medications include acute bronchitis, pneumonia, tuberculosis, pulmonary edema, and acute respiratory distress syndrome. Chronic conditions requiring inhaled medications encompass those classified as COPD (i.e., asthma, chronic bronchitis, and emphysema), as well as other chronic conditions, including cystic fibrosis, lung cancer, and pneumoconiosis.
These conditions often require medications to open airways, decrease airway inflammation, and promote airflow. The delivery of medications directly into the airways allows for a faster response when compared to systemically administered medications and decreases the impact of systemic side effects. Inhaled medications come in different forms and delivery devices. Common inhaled medications include short- and long-acting bronchodilators and corticosteroids. These may be delivered using various types of inhalation delivery devices, such as metered-dose inhalers, dry-powder inhalers, and breath-activated inhalers. These devices require either a chemical propellant, deep inhalation, or a fine mist to deliver the medication. Regardless of the type of delivery, the goal is the same: to deliver the medications to the lower bronchi and bronchioles. For those using metered-dose inhalers and who have difficulties inhaling the medications into the lower airways, a device called a spacer may be used to help coordinate breathing with medication release from the device.
Because these medications require administration that is coordinated with the breathing cycle, it is important to educate the patient about the procedure prior to administering the medication and for the patient to have a working understanding of the process before beginning inhaled medication administration. A thorough respiratory assessment should also be completed prior to administering any inhaled medication to ensure the appropriateness of the medication and delivery device and the ability to comply with administration procedure.
This demonstration will present the preparation and administration of inhaled medications using the metered-dose inhaler as the prototype delivery device.
1. General medication administration considerations (review in the room, with the patient).
2. Go to the medication preparation area and complete the first safety check using the five "rights" of medication administration. Refer to the "Safety Checks for Acquiring Medications from a Medication Dispensing Device" video.
3. In the medication preparation area, complete the second safety check using the five "rights" of medication administration. Refer to the "Safety Checks for Acquiring Medications from a Medication Dispensing Device" video.
4. Gather the necessary supplies, including a cup of water, a basin, and a spacer (if required). Take the supplies into the patient's room.
Administration
5. Wash hands when entering the patient's room.
6. In the patient's room, complete the third and final medication safety check, adhering to the five "rights" of medication administration.
7. As with any medication administration, remind the patient of the medication purpose, any adverse reactions, and the administration procedure.
8. Assist the patient into an upright position to facilitate lung expansion.
9. Administer the inhaled medication using the mouthpiece.
10. Variation: Administer the inhaled medication using a spacer.
11. If the patient received an inhaled corticosteroid, or if he/she requests it, hand the patient the cup of water and ask him/her to swish the water in his/her mouth and spit it in the basin.
12. As with any medication, document the medication administration date, time, and location of administration in the electronic MAR.
13. Prior to leaving the room, remind the patient about any side effects/adverse effects or considerations for which he/she should notify the nurse.
14. Leave the patient room and wash hands with soap and water for at least 20 s, applying vigorous friction
Inhaled medications open airways, decrease inflammation, promote airflow, and can lead to a quicker response with reduced systemic side effects. These medications are prescribed for conditions affecting bronchi, which are the small airways that branch off the trachea and bronchioles and spread through the lung tissue.
Conditions treated with the help of inhaled medications may be acute or chronic in nature. Common acute conditions include acute bronchitis, pneumonia, tuberculosis, pulmonary edema, and acute respiratory distress syndrome. Chronic conditions include asthma, chronic bronchitis, emphysema, cystic fibrosis, lung cancer, and pneumoconiosis.
Inhaled medications are available in different forms and delivery devices. These forms include short- and long-acting bronchodilators and corticosteroids. Some patients will benefit from the use of a spacer with a metered dose inhaler to assist in coordinating breathing with the medication.
This video illustrates the preparation and administration of inhaled medications using a metered dose inhaler for treatment of acute and chronic conditions that affect the airways.
Upon entering the room, wash hands with soap or apply hand sanitizer with friction for at least 20 seconds.
At the bedside computer, logs into the patient’s electronic health record to review their medical history and past administration times. Verify with the patient any medication allergies and discuss the physical allergic responses and reactions. In the MAR, review the inhaled medications that are due to be administered and clarify with the patient if they have a preference or concerns with regard to administration.
Next, assess the patient’s respiratory status by auscultating the breath sounds and rate to determine appropriateness of medication delivery. If the patient is experiencing shallow respirations or increased work of breathing, do not forget to notify the care provider.
Review the medication administration process with the patient. Because these medications require administration that is coordinated with the breathing cycle, it is important to educate the patient about the procedure prior to administering the medication and for the patient to have a working understanding of the process before beginning inhaled medication administration. This is also an opportunity to determine if the patient needs additional education on the medication, delivery device, and/or effect on the body.
Now, leave the room and wash hands, as previously described. Then go to the medication preparation area to obtain the medication and complete the first safety check, adhering to the five “rights” of medication administration. Verify the expiration date and complete the second safety check, following the five “rights.” After the second safety check, gather the needed supplies, including a cup of water, basin, and a spacer if necessary, and go to the patient’s room.
Now, with the medications and supplies, enter the patient’s room and perform hand hygiene, as described previously. Then, complete the third and final safety check, following the five “rights.”
As with any medication administration, review the purpose of the medication with the patient, possible adverse reactions, and how it will be administered. Help the patient to an upright position to facilitate lung expansion. Now, vigorously shake the inhaler and then remove the mouthpiece cover.
Next, have the patient hold the lower portion of the inhaler between their thumb and middle finger. The index or middle finger should be placed at the top of the canister. Finally, have the patient place the mouthpiece of the inhaler between the upper and lower lips and close them tight.
Now, instruct the patient to inhale deeply and fully while depressing the canister with their index or middle finger to release the medication. At the top of the patient’s inhalation, ask them to hold their breath for 10 seconds, or as long as it is comfortable, and to release their finger from the top of the canister. If a second inhaled dose is ordered, have the patient wait for approximately 1 minute prior to administering the second dose. Ask them to follow the same steps as for the first dose.
Some patients will use a spacer to help administer the inhaled medication. This is the case when a patient has difficulty with coordinating inhalation and pressing on the canister. If using a spacer, first shake the inhaler with vigor and remove the mouth piece cover. Next, while holding the inhaler near the bottom with your non-dominant hand, and the spacer in your dominant hand, insert the mouthpiece of the inhaler into the spacer end.
Next, ask the patient to hold the lower portion of the inhaler between the thumb and middle finger, with their index or middle finger at the top of the canister, and have them support the spacer between the index finger and thumb of their non-dominant hand. Then instruct the patient to place the mouthpiece of the spacer between the upper and lower lips, to close the lips tightly around the mouthpiece, and to breathe normally.
Now ask the patient to depress the canister with their finger to release the medication and to take in a slow, deep breath. At the top of the patient’s inhalation, ask them to hold their breath for 10 seconds, or as long as it is comfortable, then release the finger from the top of the canister, and to remove the spacer from their mouth before they exhale slowly. If a second inhaled dose is ordered, have the patient wait for approximately 1 minute prior to administering the second dose.
If the medication is a corticosteroid, or if the patient requests, give the patient a cup of water to swish around in their mouth and spit out in the basin.
Now, document the date, time, and location of the medication administration in the electronic MAR. Remind the patient about the possibility of side effects from the medication and/or when they should call the nurse. Then leave the room and wash hands for at least 20 seconds with vigorous friction.
“Proper training by medical professionals will promote proper patient use and effective airway management. It is important for the patient to be instructed to keep their inhaler at room temperature; if it drops below room temperature, it should be warmed only with the hands prior to use to promote the effectiveness of the chemical propellant. The device should never be warmed with anything other than hands, nor should it be punctured, to avoid injury.”
“Common errors with administration of inhaled medications include poor breath/dose administration coordination, failure to hold breath at the top of inhalation for a long enough duration, breathing in too quickly to receive the full dose, failure to shake the inhaler adequately, inhaling through nose instead of mouth, and failure to allow sufficient time between doses.”
You’ve just watched JoVE’s video on administration of inhaled medications. You should now understand common indications for use, how they work, and how to administer inhaled medications. As always, thanks for watching!
This demonstration provides instructions on the administration of inhaled medications using a metered-dose inhaler, with mouthpiece and spacer variations. For effective inhaled medication administration, it is important for the patient to be able to follow the instructions and to have adequate respiratory functioning to allow for a full, complete inhalation. If the patient is unable to coordinate the inhalation with depression of the inhaler canister, using a spacer can help to increase the likelihood of the patient receiving the full medication dose. Proper training by medical professionals will promote proper patient use and effective airway management. It is important to instruct the patient to keep the inhaler at room temperature; if it drops below room temperature, it should be warmed only with the hands prior to use to promote the effectiveness of the chemical propellant. The device should never be warmed with anything other than hands, nor should it be punctured (to avoid injury). It is important that the patient is instructed on the proper cleaning of the inhaler. To do this, the patient should remove the medication canister from the inhaler holder and mouthpiece. The inhaler and cap should be rinsed with warm water and dried completely before recombining the inhaler components. Common errors with the administration of inhaled medications include performing poor breath/dose administration coordination, failing to hold the breath at the top of inhalation for a long enough duration, breathing in too quickly to receive the full dose, failing to shake the inhaler adequately, inhaling through the nose instead of the mouth, and failing to allow sufficient time between medication doses.
Inhaled medications open airways, decrease inflammation, promote airflow, and can lead to a quicker response with reduced systemic side effects. These medications are prescribed for conditions affecting bronchi, which are the small airways that branch off the trachea and bronchioles and spread through the lung tissue.
Conditions treated with the help of inhaled medications may be acute or chronic in nature. Common acute conditions include acute bronchitis, pneumonia, tuberculosis, pulmonary edema, and acute respiratory distress syndrome. Chronic conditions include asthma, chronic bronchitis, emphysema, cystic fibrosis, lung cancer, and pneumoconiosis.
Inhaled medications are available in different forms and delivery devices. These forms include short- and long-acting bronchodilators and corticosteroids. Some patients will benefit from the use of a spacer with a metered dose inhaler to assist in coordinating breathing with the medication.
This video illustrates the preparation and administration of inhaled medications using a metered dose inhaler for treatment of acute and chronic conditions that affect the airways.
Upon entering the room, wash hands with soap or apply hand sanitizer with friction for at least 20 seconds.
At the bedside computer, logs into the patient’s electronic health record to review their medical history and past administration times. Verify with the patient any medication allergies and discuss the physical allergic responses and reactions. In the MAR, review the inhaled medications that are due to be administered and clarify with the patient if they have a preference or concerns with regard to administration.
Next, assess the patient’s respiratory status by auscultating the breath sounds and rate to determine appropriateness of medication delivery. If the patient is experiencing shallow respirations or increased work of breathing, do not forget to notify the care provider.
Review the medication administration process with the patient. Because these medications require administration that is coordinated with the breathing cycle, it is important to educate the patient about the procedure prior to administering the medication and for the patient to have a working understanding of the process before beginning inhaled medication administration. This is also an opportunity to determine if the patient needs additional education on the medication, delivery device, and/or effect on the body.
Now, leave the room and wash hands, as previously described. Then go to the medication preparation area to obtain the medication and complete the first safety check, adhering to the five “rights” of medication administration. Verify the expiration date and complete the second safety check, following the five “rights.” After the second safety check, gather the needed supplies, including a cup of water, basin, and a spacer if necessary, and go to the patient’s room.
Now, with the medications and supplies, enter the patient’s room and perform hand hygiene, as described previously. Then, complete the third and final safety check, following the five “rights.”
As with any medication administration, review the purpose of the medication with the patient, possible adverse reactions, and how it will be administered. Help the patient to an upright position to facilitate lung expansion. Now, vigorously shake the inhaler and then remove the mouthpiece cover.
Next, have the patient hold the lower portion of the inhaler between their thumb and middle finger. The index or middle finger should be placed at the top of the canister. Finally, have the patient place the mouthpiece of the inhaler between the upper and lower lips and close them tight.
Now, instruct the patient to inhale deeply and fully while depressing the canister with their index or middle finger to release the medication. At the top of the patient’s inhalation, ask them to hold their breath for 10 seconds, or as long as it is comfortable, and to release their finger from the top of the canister. If a second inhaled dose is ordered, have the patient wait for approximately 1 minute prior to administering the second dose. Ask them to follow the same steps as for the first dose.
Some patients will use a spacer to help administer the inhaled medication. This is the case when a patient has difficulty with coordinating inhalation and pressing on the canister. If using a spacer, first shake the inhaler with vigor and remove the mouth piece cover. Next, while holding the inhaler near the bottom with your non-dominant hand, and the spacer in your dominant hand, insert the mouthpiece of the inhaler into the spacer end.
Next, ask the patient to hold the lower portion of the inhaler between the thumb and middle finger, with their index or middle finger at the top of the canister, and have them support the spacer between the index finger and thumb of their non-dominant hand. Then instruct the patient to place the mouthpiece of the spacer between the upper and lower lips, to close the lips tightly around the mouthpiece, and to breathe normally.
Now ask the patient to depress the canister with their finger to release the medication and to take in a slow, deep breath. At the top of the patient’s inhalation, ask them to hold their breath for 10 seconds, or as long as it is comfortable, then release the finger from the top of the canister, and to remove the spacer from their mouth before they exhale slowly. If a second inhaled dose is ordered, have the patient wait for approximately 1 minute prior to administering the second dose.
If the medication is a corticosteroid, or if the patient requests, give the patient a cup of water to swish around in their mouth and spit out in the basin.
Now, document the date, time, and location of the medication administration in the electronic MAR. Remind the patient about the possibility of side effects from the medication and/or when they should call the nurse. Then leave the room and wash hands for at least 20 seconds with vigorous friction.
“Proper training by medical professionals will promote proper patient use and effective airway management. It is important for the patient to be instructed to keep their inhaler at room temperature; if it drops below room temperature, it should be warmed only with the hands prior to use to promote the effectiveness of the chemical propellant. The device should never be warmed with anything other than hands, nor should it be punctured, to avoid injury.”
“Common errors with administration of inhaled medications include poor breath/dose administration coordination, failure to hold breath at the top of inhalation for a long enough duration, breathing in too quickly to receive the full dose, failure to shake the inhaler adequately, inhaling through nose instead of mouth, and failure to allow sufficient time between doses.”
You’ve just watched JoVE’s video on administration of inhaled medications. You should now understand common indications for use, how they work, and how to administer inhaled medications. As always, thanks for watching!
