Summary

Reverse Genetics to Engineer Positive-Sense RNA Virus Variants

Published: June 09, 2022
doi:

Summary

The protocol describes a method for introducing controllable genetic diversity in the hepatitis C virus genome by combining full-length mutant RNA synthesis using error-prone PCR and reverse genetics. The method provides a model for phenotype selection and can be used for 10 kb long positive-sense RNA virus genomes.

Abstract

The lack of a convenient method for the iterative generation of diverse full-length viral variants has impeded the study of directed evolution in RNA viruses. By integrating a full RNA genome error-prone PCR and reverse genetics, random genome-wide substitution mutagenesis can be induced. We have developed a method using this technique to synthesize diverse libraries to identify viral mutants with phenotypes of interest. This method, called full-length mutant RNA synthesis (FL-MRS), offers the following advantages: (i) the ability to create a large library via a highly efficient one-step error-prone PCR; (ii) the ability to create groups of libraries with varying levels of genetic diversity by manipulating the fidelity of DNA polymerase; (iii) the creation of a full-length PCR product that can directly serve as a template for mutant RNA synthesis; and (iv) the ability to create RNA that can be delivered into host cells as a non-selected input pool to screen for viral mutants of the desired phenotype. We have found, using a reverse genetics approach, that FL-MRS is a reliable tool to study viral-directed evolution at all stages in the life cycle of the hepatitis C virus, JFH1 isolate. This technique appears to be an invaluable tool to employ directed evolution to understand adaptation, replication, and the role of viral genes in pathogenesis and antiviral resistance in positive-sense RNA viruses.

Introduction

Forward genetic screening begins with a viral phenotype of interest and then, through sequencing its genome and comparing it to that of the original strain, attempts to identify the mutation(s) causing that phenotype. In contrast, in reverse genetic screens, random mutations are introduced in a target gene, followed by an examination of the resultant phenotype(s)1. For the reverse genetics approach, in vitro mutagenesis is the most widely used technique to create a pool of variants that are subsequently screened for phenotypes of interest. Various genetic tools have been reported for achieving genome-wide random mutagenesis of RNA viruses, including error-prone PCR (ep-PCR)2,3, circular polymerase extension4, and Mu-transposon insertion mutagenesis 5,6,7. The latter two methods yield libraries harboring limited sequence diversity and are prone to the introduction of large insertions and deletions, which are highly lethal for viruses and severely limit the recovery of infectious viral variants.

ep-PCR is a well-known powerful mutagenesis technique widely used in protein engineering to generate mutant enzymes for the selection of phenotypes with desired properties, such as enhanced thermal stability, substrate specificity, and catalytic activity8,9,10. This technique is easy to perform because it requires simple equipment, does not involve tedious manipulations, uses commercially available reagents, and is quick; moreover, it generates high-quality libraries.

Here, we developed a novel method for full-length mutant RNA synthesis (FL-MRS) to generate complete genomes of hepatitis C virus (HCV) by integrating ep-PCR, which induces random genome-wide substitution mutagenesis and reverse genetics. Even a single nucleotide insertion or deletion is highly deleterious for positive-sense RNA viruses ([+]ssRNA); hence, PCR-based substitution mutagenesis is the preferred method for the iterative generation of large, diverse libraries of full (+)ss RNA virus genomes with good viability.

FL-MRS is a straightforward approach that can be applied to any positive-sense RNA virus with a ~10 kb genome length through the meticulous design of a primer set that binds to the viral cDNA clone. pJFH1 is an infectious cDNA clone that encodes the HCV genotype 2a and can recapitulate all steps of the virus life cycle. By using the FL-MRS approach, we demonstrated the synthesis of randomly mutagenized full-genome libraries (mutant libraries [MLs]) to produce replication-competent JFH1 variants for which there was no prior knowledge of the properties associated with mutations. Upon exposure to an antiviral, some of the viral variants quickly overcame the drug pressure with the desired phenotypic change. Using the protocol described here, a plethora of viral variants can be generated, creating opportunities to study the evolution of (+)ssRNA viruses.

Protocol

NOTE: The JFH1 strain (WT) used here was a kind gift from Takaji Wakita, National Institute of Infectious Diseases. The human hepatoma cell line, Huh7.5, was a kind gift from Charles Rice, The Rockefeller University. A schematic of the method is shown in Figure 1.

1. Genome-wide substitution mutagenesis of JFH1 using error-prone PCR

  1. To perform ep-PCR, prepare the master mix for four sets of experiments with primers J-For 5'-GTTTTCCCAGTCAGCACGTTGTAAAACGACGGC-3' and J-Rev 5'-CATGATCTGCAGAGAGACCAGTTACGGCACTCTC -3' (Figure 1A), along with the reaction components described in Table 1 without the pJFH1 template (plasmid isolated from JFH1 strain).
  2. Aliquot the master mix into four tubes, add 100 ng, 50 ng, 25 ng, and 10 ng of template into the individual tubes, and adjust the total volume of the reaction to 50 µL. Apply the cycling conditions described in Table 2 to amplify a 9736 base pair (bp) fragment comprising the T7 promoter and full-length HCV genome (Figure 2).
    NOTE: The ep-PCR product must contain the T7 promoter sequence to facilitate in vitro transcription of the viral genome. Therefore, the forward primer must be located upstream of the T7 promoter of the viral cDNA clone, and the reverse primer sequence should end at the 3'-end of the virus genome to facilitate transcription run-off. Optimize each component of the ep-PCR reaction within the range recommended by the manufacturer of Taq DNA polymerase to achieve high-yield amplification. In addition to varied template amounts, unbalanced dNTPs (especially low dATP and/or dGTP concentration) can also be used to increase diversity in the length of viral genomes from 6-8 kb long3.
  3. Estimate the ep-PCR product amplified by loading equal volumes of the PCR products (5 µL) and comparing to known amounts of 1 kilobase (kb) DNA ladder by running a 0.8% Tris-acetate-EDTA (TAE)-based agarose gel electrophoresis11. Purify the product using a column purification kit as directed by the manufacturer.
  4. Estimate the concentration of the purified product by measuring the absorbance at 260 nm using a microvolume spectrophotometer12. Vacuum concentrate the ep-PCR product if needed to obtain a product concentration ≥100 ng/µL.
    ​NOTE: More accurate estimation can be made by loading two-fold serial dilutions of ep-PCR product and comparing their intensities to the known amounts of 1 kb DNA ladder.

2. Viral RNA synthesis

  1. Set up a 40 µL reaction to digest 5 µg of clonal-pJFH1 with 4 U of XbaI enzyme at 37 °C for 2 h, followed by column purification and measuring the absorbance at 260 nm in a microvolume spectrophotometer12. Set up a 20 µL in vitro transcription reaction of the column-purified ep-PCR product or clonal-pJFH1 (WT) using a commercially available large-scale RNA production system according to the manufacturer's instructions.
  2. In a 200 µL microcentrifuge tube, mix approximately 1 µg of the purified ep-PCR product (mutant libraries) or XbaI digested clonal-pJFH1, 10 µL of 2x buffer containing ribonucleotides, and 2 µL of T7 enzyme mix. Mix all the components and briefly spin down the components. Incubate the reaction mixture at 37 °C for 45 min, followed by the addition of 1 U RNase-free DNase enzyme and incubation at 37 °C for 30 min (Figure 1C).
  3. Purify in vitro synthesized RNA using an RNA cleanup kit as per the manufacturer's instructions, elute in 40 µL of RNase- and DNase-free water, and estimate the concentration of the purified RNA by measuring the absorbance at 260 nm using a microvolume spectrophotometer12. Make aliquots as needed (5 µg or 2 µg) to avoid freeze-thaw and store them at −80 °C. Verify the integrity and size of the viral transcripts by using 2 µg of RNA for a MOPS formaldehyde 0.8% agarose gel electrophoresis13 (Figure 3).

3. Estimation of the proportion of mutations in ep-PCR products (mutant libraries)

NOTE: In this step, the proportion of nucleotides mutated by subcloning the product obtained in step 2. was estimated to demonstrate the advantage of employing ep-PCR to create genetic heterogeneity using two full genome mutant libraries (ML50 and ML25) and clonal pJFH1-derived viral RNAs. The proportion of mutations was estimated in the HCV NS5A gene, which was also the phenotypic readout gene (drug resistance) in this study.

  1. Set up a 20 µL cDNA synthesis reaction by adding approximately 1 µg of the viral RNA synthesized in step 2., 5 µM reverse primer 5'-GTGTACCTAGTGTGTGCCGCTCTA-3', and 200 U reverse transcriptase as per the manufacturer's recommendations.
  2. Using the cDNA, amplify a 2571 bp fragment that comprises the complete NS5A gene. To do this, prepare a reaction mixture containing 0.5 µM for 5272F and 7848R primers (final concentration; Table 3), 1.5 mM MgCl2, 1x PCR buffer, and 1 U high-fidelity Taq polymerase in a total volume of 50 µL and run an amplification cycle using the conditions described in Table 4.
  3. Run the product on a 0.8% TAE-based agarose gel to confirm the product size of 2571 bp and then purify the product using a column purification kit as directed by the manufacturer. Elute the column-purified product in 40 µL of sterile water.
  4. To add a 3' A overhang to the product, add 0.5 µM dATP and 1 U of low-fidelity Taq DNA polymerase and incubate the entire PCR product at 70 °C for 30 min along with 1x PCR buffer and 1.5 mM MgCl2 (final concentration). Purify the mixture using a column purification kit as directed by the manufacturer
    NOTE: Alternatively, excise the ~9.7 kb long product from the gel from step 1.4. and perform cloning using a commercially available kit for cloning of long-PCR product according to the manufacturer's instructions or perform NGS of the ep-PCR product using an Illumina platform2.
  5. Set up a ligation reaction by adding 5 µL of 2x ligation buffer, 50 ng of the T-vector DNA, approximately 3-fold molar excess of the insert DNA synthesized in step 3.4., 3 Weiss units of T4 DNA ligase, and nuclease-free water to a total volume of 10 µL. Incubate this reaction at room temperature for 3 h and then add 100 µL of Escherichia coli DH5α with the ligated DNA; heat shock the cells at 42 °C for 35 s (Figure 1B).
  6. Add 1 mL of Luria-Bertani (LB) medium (without antibiotic) and incubate with gentle shaking for 1 h at 37 °C for recovery. Centrifuge the cell suspension at 13,800 x g, discard the supernatant, and resuspend in 200 µL of fresh LB medium.
  7. Plate 100 µL of the transformed E. coli DH5α cells on an LB plate containing 50 µg/mL ampicillin and incubate at 37 °C for 16 h. Set up minipreps of 25-30 colonies in 5 mL of LB medium + 50 µg/mL ampicillin and grow overnight at 37 °C.
  8. The next day, extract the plasmids with a plasmid purification kit according to the manufacturer's instructions and perform restriction enzyme digestion in 10 µL volume with 200 ng of the isolated plasmids, 2 U of EcoR1, and 1x restriction buffer for all the colonies.
  9. After incubating the digestion mixtures at 37 °C for 3 h, resolve the products on 0.8% TAE-based agarose gel to confirm plasmid DNA insertion.
  10. Perform Sanger sequencing of the plasmids of 25 positive clones using M13 Forward, M13 reverse, 6208-SPF, and 6748-SPF primers (Table 3) to determine the proportion of mutations (expressed as the proportion of nucleotides mutated) in the viral RNAs derived from the libraries and clonal pJFH1 (Figure 1B and Figure 4).

4. Viral RNA transfection of the Huh7.5 cell line

NOTE: Use RNase/DNase-free tissue culture materials and work in a sterile class II biosafety cabinet. Work in the recommended containment facility as per the biosafety guidelines of the organization.

  1. Maintain Huh7.5 cells by incubating in a 5% CO2 incubator at 37 °C in a T75 cm2 tissue culture flask containing 15 mL of complete Dulbecco's Modified Eagle's Medium (DMEM) supplemented with 10% (vol/vol) fetal bovine serum, penicillin (100 U/mL), and streptomycin (100 µg/mL; Figure 1D).
  2. Split the cells in a 1:3 ratio when confluency reaches 90%. Wash the cells with 1x prewarmed phosphate-buffered saline (PBS; pH 7.4). Add 5 mL of 1x trypsin-EDTA solution to completely cover the cell layer, gently swirl the flask, and then incubate the flask at 37 °C for 5 min.
    NOTE: Incubation time may vary; incubate the cells until the cell layer is completely detached from the cell culture flask surface.
  3. Add 10 mL of 1x prewarmed complete DMEM, disperse the cells by repeat pipetting, and collect the cell suspension in a 15 mL or 50 mL sterile centrifuge tube. Centrifuge the cell suspension at 252 x g for 5 min at room temperature. Discard the supernatant, resuspend the cell pellet in 6 mL of complete DMEM, and incubate the cells at 37 °C in a humidified incubator with 5% CO2.
  4. For continuous maintenance of naïve, transfected, or virus-infected Huh7.5 cells, repeat step 4.2. and step 4.3.
  5. 1 day prior to transfection, split the cells as described in steps 4.1.-4.3., count the number of viable cells using a hemocytometer, seed the Huh7.5 cells at a density of 0.6 x 106 in 35 mm dishes in 2 mL of complete DMEM, and incubate the cells at 37 °C in a humidified incubator with 5% CO2.
  6. On the following day, prepare the transcript-lipid complex. To do this, dilute 10 µL of transfection reagent in 50 µL of minimal essential medium, and separately dilute 5 µg of viral transcripts in 50 µL of minimal essential medium.
  7. Incubate both mixtures at room temperature for 10 min, and then mix them in a single sterile microcentrifuge tube and further incubate the mixture at room temperature for 30 min to form the transcript-lipid complex.
  8. After 16 h of cell incubation, remove the culture medium from the culture dish, wash the cells 2x with prewarmed 1x PBS, and add 1.5 mL of minimal essential medium. Slowly add the transcript-lipid complex to the dish and gently swirl with hands to ensure uniform distribution of the complexes.
  9. Incubate the cells in a 5% CO2 incubator at 37 °C for 10 h. Then, remove the medium, wash the transfected cells 2x with 1 mL of prewarmed 1x PBS, and add 2 mL of complete DMEM.

5. Virus production

  1. Split the transfected Huh7.5 cells every 2 days or 3 days when they reach 90% confluency. Collect virus supernatants at every split and store them at −80 °C for further analysis.
  2. At every split, monitor the spread of the virus using a focus forming assay (FFA) as described in step 6.2. Harvest the virus until the virus spread reaches >80% of transfected cells (Figure 1D).
    NOTE: Split the transfected cells at 1:1 ratio for the first few passages to rescue the maximum number of viral variants. Virus spread slows and viability decreases with increasing proportions of mutations in the full-genome MLs2.

6. Quantification of virus titers

  1. Quantification of viral RNA
    1. Isolate viral RNA from 140 µL of culture supernatants using a viral RNA isolation kit according to the manufacturer's instructions.
    2. Set up a 10 µL qRT-PCR reaction using a commercial qRT-PCR kit according to the manufacturer's instructions. Use the forward primer R6-130-S17, reverse primer R6-290-R19 (final concentration 0.2 µM each), and probe R9-148-S21FT (final concentration 0.3 µM) for HCV RNA quantification (Table 3). Set the run conditions as 48 °C for 20 min, 95 °C for 10 min, and then 45 cycles of 95 °C for 15 s and 60 °C for 1 min.
      NOTE: The probe should contain the fluorescent reporter dye 6-carboxyfluorescein (FAM) and the quencher dye 6-carboxy-tetramethyl-rhodamine (TAMRA) at the 5' and 3' ends, respectively.
    3. Run reactions in a real-time PCR machine. Setup negative controls, i.e., RNA extracted from the supernatants of mock-infected cells and nuclease-free water simultaneously to ensure the absence of cross-contamination.
    4. In parallel, generate a standard curve using a 10-fold serially diluted known copy number of HCV transcripts (1 x 108 to 0) for the quantification of viral RNA. Perform the quantification in triplicate (Figure 1D).
  2. Infectious virus titer quantification using 50% tissue culture infectious dose (TCID50)
    1. Approximately 16 h prior to adding the virus, plate 6.5 x 103 Huh7.5 cells/well in a 96-well plate and incubate the cells at 37 °C in a 5% CO2 incubator.
    2. In a biosafety class II cabinet, perform 10-fold serial dilutions (1 mL each) covering 1 x 10−1 to 1 x 10−6 dilutions (eight dilutions) of the harvested virus (obtained when the virus spread reaches >80% of cells as described in step 5.). Add 100 µL/well (with eight replicates) of the diluted virus to infect the Huh7.5 cells and keep the plate in an incubator at 37 °C with 5% CO2 for 3 days.
    3. After 3 days, wash the infected cells 3x with 0.1 mL of PBS each time, and fix and permeabilize the cells with 0.1 mL of ice-cold methanol at −20 °C for 20 min. Wash the wells with 1x PBS 3x and then 1x with PBS-T (1x PBS/0.1% [v/v] Tween-20).
    4. After removing the PBS-T, block the cells for 30 min at room temperature with 0.1 mL of 1% bovine serum albumin (BSA) containing 0.2% skimmed milk in PBST. Remove the blocking solution and treat the cells for 5 min with 0.1 mL of 3% H2O2 prepared in 1x PBS.
    5. Again, wash the cells 2x with 1x PBS and 1x with PBS-T, then add 50 µL/well of anti-NS5A 9E10 mAb (1:10000, stock 1 mg/mL; a kind gift from Charles Rice, The Rockefeller University), and incubate at room temperature for 1 h. Wash the wells again 3x with 1x PBS and 1x with PBS-T.
    6. Add 50 µL/well of HRP-conjugated goat anti-mouse secondary IgG (1:4000), incubate for 30 min at room temperature, and then remove the unbound antibody by washing the wells with 0.1 mL of 1x PBS.
    7. Add 30 µL of DAB (diaminobenzidine tetrahydrochloride) color substrate and incubate the plate with gentle rocking for 10 min at room temperature. The substrate develops a brown precipitate on the well surface that indicates HCV NS5A antigen.Remove the DAB solution and wash the wells 2x with 1x PBS and 1x with distilled water. Add 100 µL of PBS containing 0.03% sodium azide.
    8. Examine each well under an inverted light microscope using a 10x objective. Count the number of positive wells. If the well contains one or more NS5A-positive cells, then it is positive; if the well shows an absence of NS5A-positive cells, then it is negative. Use a Reed and Muench calculator to estimate the endpoint dilution that infects 50% of the wells (TCID50)14,15. A reciprocal of the dilution required to yield the TCID50 is the virus infectivity titer (foci forming units) per unit volume.
      ​NOTE: Virus infectivity titers vary for different mutant libraries.

7. Drug-resistant viral variant selection

  1. Dissolve pibrentasvir (PIB), an NS5A inhibitor, in 100% DMSO to a concentration of 1 mM and further dilute it in complete DMEM to a concentration of 10 nM.
  2. To determine the 50% effective concentration of PIB, seed Huh7.5 cells at a density of 0.6 x 106/well in a 6-well plate and incubate the cells at 37 °C in a 5% CO2 incubator. After 16 h of cell incubation, add a virus dose of either ML50 or clonal JFH1 virus to infect 50% of cells, and then, at 12 h post-infection (h p.i.), treat the cells with a two-fold dilution series of PIB ranging from 0.5-100 pM. Measure the FFA and quantify FFU as in step 6.2. after 3 days of incubation.
  3. Plot the dose-response curves using FFU-reduction assay values in statistical analysis software. From the sigmoidal curve, obtain the 50% effective concentration (EC50; Figure 5).
    NOTE: The effective concentration range may vary depending on the class, between HCV antivirals of the same class, and depending on the mutant library.
  4. For the experiment, infect naïve Huh7.5 cells at 70% confluence with an ML50 virus (variants derived from ML50 RNA) dose to infect 50% of the cells for 12 h, and then transfer the infected cells onto 6-well plates 24 h post-infection.
  5. Add 1x EC50 PIB (47.3 pM) to the infected cells after 16 h of cell split. Do this after every cell split for six consecutive passages (18 days), followed by three drug-free passage cycles, and monitor virus spread using FFAs as described in step 6.2. Scale-up FFA reagents as per the growth area. Harvest viral supernatants at each passage and store them at −80 °C until use.
    NOTE: Viral spread to greater than 50% of cells during treatment follow-up may be defined as a breakthrough, and viral spread during the drug withdrawal period may be defined as viral relapse16.
  6. Extract viral RNA from the supernatant on day 18, as described in step 6.1.1., and then synthesize cDNA, as shown in step 3.1. Amplify the NS5A gene using 5 µL of 1:5 diluted cDNA and the PCR components described in step 3.2. Then, follow steps 3.3.-3.5. to determine NS5A drug resistance mutations in 6-8 positive bacterial plasmids using the NS5A sequencing primers 6186F, 6862F, and 6460R (Table 3 and Table 4).
    NOTE: Here in this study, we reported substitutions in NS5A of variants selected during PIB treatment at 1x EC50. This will rule out the contribution of substitutions other than NS5A in reduced susceptibility to PIB.

Representative Results

A plethora of full-length HCV variants can be generated and screened for drug-resistant phenotypes of interest following the procedures described in Figure 1. Full genome mutant libraries were synthesized using clonal-pJFH1 in decreasing amounts (100-10 ng), as shown in Figure 2. Average yields of ep-PCR products (mutant libraries) ranged from 3.8-12.5 ng/µL. Figure 3 shows the viral transcripts synthesized from the clonal-pJFH1 and the representative mutant library (ML50 synthesized using 50 ng of clonal-pJFH1). The clonal-pJFH1 was linearized via XbaI digestion, while ML50 was used directly in the in vitro transcription reaction. The proportion of mutations in mutant libraries (mutant viral RNAs) increased with decreasing input pJFH1 in the ep-PCR reaction, as shown in Figure 4. ML50 synthesized using 50 ng of the template (clonal-pJFH1) had 4 substitutions per 10,000 bp copied, whereas ML25 synthesized using 25 ng of template harbored 9 substitutions.No substitutions within the number of nucleotides sequenced were found in clonal-pJFH1. ML50 viral variants were less susceptible (12.7-fold) to pibrentasvir, an NS5A inhibitor, compared to clonal-JFH1 virus, as shown in Figure 5. Table 5 has NS5A substitutions identified in ML50 viral variants selected against 1x EC50 of pibrentasvir treatment. Of the eight NS5A clones, four had a combination of D7V+F28C, whereas V8A+F28C and F36L occurred in one clone each. These mutations were at the N-terminus region of NS5A, which is known to harbor clinically relevant NS5A-resistance mutations17.

Figure 1
Figure 1: Schematic of the FL-MRS strategy and drug-resistant phenotype selection. (A) The pJFH1 cDNA (wild-type) clone carries a full-length genotype 2a virus genome and T7 promoter. The primer J-For is upstream of the T7 promoter, and the primer J-Rev is located at the 3' end of the HCV genome. (B) Clonal-pJFH1 is randomly mutagenized using error-prone PCR to engineer genetic variations and to create full genome mutant libraries. Clonal-pJFH1 is linearized by XbaI digestion. (C) Full-genome ep-PCR products and linearized clonal-pJFH1 are the templates for in vitro transcription. The proportion of mutations in the viral RNAs of MLs and clonal-JFH1 was determined by TA subcloning of NS5A and Sanger sequencing of positive TA clones. (D) Replication-competent variants generated after mutant viral RNA transfection of Huh7.5 cells were treated with pibrentasvir (an NS5A inhibitor) for the selection of NS5A-resistant phenotypes. Please click here to view a larger version of this figure.

Figure 2
Figure 2: Agarose gel electrophoresis of ep-PCR products. HCV full-genome ep-PCR products synthesized using varying template amounts (100 ng, 50 ng, 25 ng, and 10 ng of pJFH1) were separated using 0.8% TAE agarose gel electrophoresis. The expected size of the ep-PCR product is 9.7 kb. The separated products were visualized by ethidium bromide staining. Lane 1 is a 1 kb DNA ladder; Lane 6 is no-template control (labeled as H2O). Please click here to view a larger version of this figure.

Figure 3
Figure 3: MOPS formaldehyde agarose gel electrophoresis of viral transcripts. Linearized pJFH1 (Lane 2) and the mutant library obtained with 50 ng (ML50) of pJFH1 containing ep-PCR (Lane 3) were used as templates for the in vitro transcription reaction. The integrity of the transcripts was analyzed using a MOPS formaldehyde 0.8% agarose gel stained with ethidium bromide. Lane 1 is a 1 kb RNA ladder. Please click here to view a larger version of this figure.

Figure 4
Figure 4: Proportion of substitutions in mutant libraries. NS5A genes from RNAs of clonal-pJFH1, ML50, and ML25 were amplified in high-fidelity PCRs, followed by the addition of 3' A overhang, ligation of the product with T-vector, and transformation of E. coli DH5α with the ligated product. Around 40,000 nucleotides/library or clonal-pJFH1 were Sanger sequenced. An average proportion of mutations per 10,000 bp copied is shown. Please click here to view a larger version of this figure.

Figure 5
Figure 5: Estimation of EC50 of pibrentasvir against ML50 variants. Huh7.5 cells were infected with clonal-JFH1 virus or ML50 variants and treated with serial two-fold dilutions starting at 100 pM of pibrentasvir, followed by FFA after 3 days. Sigmoidal dose-response curves using FFU-reduction assay values were plotted in statistical analysis software to estimate the 50% effective concentration. Please click here to view a larger version of this figure.

Components for 50 µL Required stock value Final concentration/reaction
10x PCR buffer  5.0 µL 1x
MgCl2 (50 mM) 1.5 µL 1.5 mM
KB Extender  2.0 µL
dNTPs (10 mM)  1.0 µL 0.2 mM
Forward primer (10 µM) 1.0 µL 0.2 µM
Reverse primer (10 µM) 1.0 µL 0.2 µM
Taq DNA Polymerase (10 U/µL) 0.5 µL (1:4 diluted) 1 U
Template (pJFH1, 20 ng/µL) 0.5 to 5.0 µL 10 to 100 ng
Water  32.5 to 37.5 µL Adjust for final volume of 50 µL

Table 1. Ep-PCR components for the amplification of HCV full genome.

Temperature Time Cycle(s)
95 °C 3 min 1
95 °C 30 Sec 30
60 °C 25 Sec
72 °C 8 min
72 °C 10 min 1
4 °C Hold

Table 2. Cycling conditions for the ep-PCR of HCV full genome.

Assay Primer Sequence (5’-3’)
Amplification of partial NS4B-NS5A-partial NS5B 5272F TGGCCCAAAGTGGAACAATTTTGG
7848R GGCCATTTTCTCGCAGACCCGGAC
cDNA synthesis 9464R GTGTACCTAGTGTGTGCCGCTCTA
qRT-PCR R9-148-S21FT (TaqMan probe) CTGCGGAACCGGTGAGTACAC
R6-130-S17  CGGGAGAGCCATAGTGG
R6-290-R19  AGTACCACAAGGCCTTTCG
Sequencing primers to determine proportions of mutations in ep-PCR products 6208-SPF CCCAACTACTTGGCTCTCTTAC
6748-SPF GACGGTGTGCAGATCCATAG
NS5A gene sequencing (and to determine proportions of mutations in ep-PCR products) 6186F CAACGCAGAACGAGACCTCATCCC
6862F GACCTTTCCTATCAATTGCTACAC
6460R TGGGCACGGCCTGACTACAA

Table 3. Primers and sequences used in assays.

Temperature Time Cycle(s)
95 °C 4 min 1
95 °C 30 Sec 5
68 °C 30 Sec
72 °C 2 min
95 °C 30 Sec 5
66 °C 30 Sec
72 °C 2 min
95 °C 30 Sec 5
64 °C 30 Sec
72 °C 2 min
95 °C 30 Sec 5
62 °C 30 Sec
72 °C 2 min
95 °C 30 Sec 10
60 °C 30 Sec
72 °C 2 min
72 °C 10 min 1
4 °C Hold

Table 4. Cycling conditions for NS5A amplification.

Substitution(s) No. of clones (n=6)
D7V+F28C 4
V8A+F28C 1
F36L 1

Table 5. Pibrentasvir-resistance substitutions of NS5A.

Discussion

In this study, we have detailed a simple and rapid FL-MRS procedure that integrates ep-PCR18 and reverse genetics for synthesizing HCV full-genome libraries, which can then be used in a cell culture system to generate replication-competent variants for the screening of drug-resistant phenotypes. The use of low-fidelity Taq DNA polymerase is a prerequisite of ep-PCR that allows the incorporation of substitutions during PCR amplification of a full-length viral genome. We tested several low-fidelity Taq DNA polymerases and found that Platinum Taq DNA polymerase yielded a ~10 kb sized ep-PCR product with a high yield (data not shown). We recommend using a fixed number of thermal cycles and varying the input template amount to control the proportion of mutations in the full-genome libraries. Since FL-MRS utilizes erroneous full genomes as templates for full-length viral RNAs, a careful design of the primer set is critical to ensure that the RNA synthesis reaction produces virus transcripts of defined length: (i) the forward primer must be located upstream (~50 nucleotides) of the T7 promoter of the cDNA clone to facilitate T7 polymerase binding to the ep-PCR product; and (ii) the reverse primer sequence must end at the 3' end of the virus genome to facilitate transcription runoff during in vitro RNA synthesis.

However, the method is relatively crude, and there is no control over incorporating the required number and type of substitutions at regions of interest in the genome. A major advantage of FL-MRS is that the synthesized full-length transcripts can be directly used to transfect cells, which renders the approach simple and efficient for generating a large pool of viral variants. In contrast, circular polymerase extension and Mu-transposon insertion mutagenesis methods require cloning of the PCR product and screening of transformants prior to selection of the desired phenotype, which severely limits the diversity of the pool of mutants. Although our method greatly increases the chance of yielding several desired phenotypes, the evaluation of individual viral variants is normally required in screening.

Integration of ep-PCR with virus reverse genetics allowed us to quickly generate HCV mutants. This method has the potential to generate hundreds of genetically modified viruses, a feat seemingly not possible with the currently available in vitro mutagenesis techniques. The method detailed here is readily adaptable to cDNA clones carrying any (+)ssRNA viruses containing genomes up to ~10 kb in length.

Divulgaciones

The authors have nothing to disclose.

Acknowledgements

Funding support (grant number BT/PR10906/MED/29/860/2014) for this study was provided by the Department of Biotechnology, Government of India.

Materials

1 kb plus DNA ladder  Thermo Fisher 10787018
1.5 ml centrifuge tube Tarsons 500010
15 ml centrifuge tube Tarsons 546021
35 mm cell culture dish  Tarsons 960010
50 ml centrifuge tube Tarsons 546041
Acetic acid Merck A6283
Agarose  HiMedia MB080
Agrose gel electrophoresis unit BioRad 1704406
Biosafety Cabinet, ClassII ESCO AC2 4S
Bovine serum albumin HiMedia MB083
Centrifuge  Eppendorf 5424-R
CFX Connect Real-Time PCR Detection System BioRad 1855201
Cloning plates 90 mm  Tarson 460091
CO2 Incubator  New Brunswick Galaxy 170R
Colibri Microvolume Spectrometer Titertek-Berthold 11050140
DAB Substrate Kit  Abcam ab94665
dATP Solution NEB N0440S
Deoxynucleotide (dNTP) Solution Set NEB N0446
Diethyl Pyrocarbonate (DEPC)  SRL chemical 46791
Dimethyl sulphoxide (DMSO) HiMedia MB058
DMEM high glucose Lonza BE12-604F
EcoR1-HF NEB R3101
EDTA tetrasodium salt dihydrate HiMedia GRM4918
Ethidium Bromide Amresco X328
Fetal bovine serum  Gibco 26140079
Formaldehyde  Fishser Scientific 12755
Gel Documentation System ALPHA IMAGER
Goat anti-Mouse IgG (H+L) Secondary Antibody, HRP Thermo Fisher A16066
Hydrogen peroxide 30% Merck 107209
Inverted microscope Nickon  ECLIPSE Ts2
LB broth  HiMedia M1245
Lipofectamine 2000  Thermo Fisher 116680270 transfection reagent
Mechanical Pipette Set Eppendorf   3120000909
Methanol Merck 106009
Micro Tips 0.2-10 µl  Tarsons 521000
Micro Tips 10 – 100 µl  Tarsons 521010
Micro Tips 200-1000 µl  Tarsons 521020
MOPS buffer  GeNei 3601805001730
Nonessential aminoacids (NEAA) Gibco 11140050
One Shot TOP10 Chemically Competent E. coli Invitrogen C404010 E.coli DH5α
Opti-MEM Gibco 1105-021 minimal essential medium
PCR tubes 0.2 ml Tarsons 510051
Pencillin/streptomycin  Gibco 15070063
pGEM-T Easy Vector System Promega A1360 T-vector DNA
Phosphate buffer saline (PBS) HiMedia TI1099
Phusion High-Fidelity DNA Polymerase NEB M0530S
Pibrentasvir Cayman Chemical 27546
Pipette controller  Gilson  F110120
Platinum Taq DNA Polymerase  Thermo 10966034
Prism GraphPad statistical analysis software
QIAamp Viral RNA Mini kit  Qiagen 52904 viral isolation kit
QIAprep Spin Miniprep Kit Qiagen 27106
QIAquick PCR Purification Kit QIAGEN 28104 cokum purification kit
RNeasy Mini Kit  QIAGEN 74104 RNA cleanup kit
Serological Pipettes 25 ml Thermo Fisher 170357N
Serological Pipettes 5 ml Thermo Fisher 170355N
Serological Pipettes10 ml Thermo Fisher 170356N
Single strand RNA Marker 0.2-10 kb Merck R7020
Skim milk  HiMedia M530
Sodium azide 0.1 M solution Merck 8591
SuperScript III Reverse Transcriptase  Invitrogen 18080044 reverse transcriptase
T100 Thermal Cycler BioRad 1861096
T175 cell culture flask  Tarsons 159910
T25 cell culture flask  Tarsons 950040
T7 RiboMax Express Large Scale RNA Production System  Promega P1320  Large Scale RNA Production System 
T75 cell culture flask  Tarsons 950050
Taq DNA Polymerase Genetix Biotech (Puregene) PGM040
TaqMan RNA-to-CT 1-Step Kit Applied Biosystems 4392653
TaqMan RNA-to-CT 1-Step Kit Thermo Fisher 4392653 commercial qRT-PCR kit 
TOPO-XL–2 Complete PCR Cloning Kit Thermo Fisher K8050-10 kit for cloning of long-PCR product 
Tris base HiMedia TC072
Trypsin-EDTA solution HiMedia TCL007
Tween 20 HiMedia MB067
Vacuum Concentrator  Eppendorf, Concentrator Plus 100248
Water bath  GRANT JBN-18
Xba1 NEB R0145S

Referencias

  1. Desselberger, U. Reverse genetics of rotavirus. Proceedings of the National Academy of Sciences of the United States of America. 114 (9), 2106-2108 (2017).
  2. Singh, D., et al. Genome-wide mutagenesis of hepatitis C virus reveals ability of genome to overcome detrimental mutations. Journal of Virology. 94 (3), 01327 (2020).
  3. Agarwal, S., Baccam, P., Aggarwal, R., Veerapu, N. S. Novel synthesis and phenotypic analysis of mutant clouds for hepatitis E virus genotype 1. Journal of Virology. 92 (4), 01932 (2018).
  4. Edmonds, J., et al. A novel bacterium-free method for generation of flavivirus infectious DNA by circular polymerase extension reaction allows accurate recapitulation of viral heterogeneity. Journal of Virology. 87 (4), 2367-2372 (2013).
  5. Arumugaswami, V., et al. High-resolution functional profiling of hepatitis C virus genome. PLoS Pathogens. 4 (10), 1000182 (2008).
  6. Heaton, N. S., Sachs, D., Chen, C. -. J., Hai, R., Palese, P. Genome-wide mutagenesis of influenza virus reveals unique plasticity of the hemagglutinin and NS1 proteins. Proceedings of the National Academy of Sciences of the United States of America. 110 (50), 20248-20253 (2013).
  7. Eyre, N. S., et al. Genome-wide mutagenesis of dengue virus reveals plasticity of the NS1 protein and enables generation of infectious tagged reporter viruses. Journal of Virology. 91 (23), 01455 (2017).
  8. Cobb, R. E., Chao, R., Zhao, H. Directed evolution: Past, present, and future. AIChE Journal. American Institute of Chemical Engineers. 59 (5), 1432-1440 (2013).
  9. Sen, S., Venkata Dasu, V., Mandal, B. Developments in directed evolution for improving enzyme functions. Applied Biochemistry and Biotechnology. 143 (3), 212-223 (2007).
  10. Yuan, L., Kurek, I., English, J., Keenan, R. Laboratory-directed protein evolution. Microbiology and Molecular Biology Reviews. 69 (3), 373-392 (2005).
  11. Green, M. R., Sambrook, J. Analysis of DNA by agarose gel electrophoresis. Cold Spring Harbor Protocols. 2019 (1), (2019).
  12. Desjardins, P., Conklin, D. NanoDrop microvolume quantitation of nucleic acids. Journal of Visualized Experiments. (45), e2565 (2010).
  13. Rio, D. C. Denaturation and electrophoresis of RNA with formaldehyde. Cold Spring Harbor Protocols. 2015 (2), 219-222 (2015).
  14. Lindenbach, B. D. Measuring HCV infectivity produced in cell culture and in vivo. Methods in Molecular Biology. 510, 329-336 (2009).
  15. Lei, C., Yang, J., Hu, J., Sun, X. On the calculation of TCID50 for quantitation of virus infectivity. Virologica Sinica. 36 (1), 141-144 (2021).
  16. Soni, S., Singh, D., Aggarwal, R., Veerapu, N. S. Enhanced fitness of hepatitis C virus increases resistance to direct-acting antivirals. The Journal of General Virology. 103 (2), (2022).
  17. Khan, S., Soni, S., Veerapu, N. S. HCV replicon systems: Workhorses of drug discovery and resistance. Frontiers in Cellular Infection Microbiology. 10, 325 (2020).
  18. Cadwell, R. C., Joyce, G. F. Randomization of genes by PCR mutagenesis. PCR Methods and Applications. 2 (1), 28-33 (1992).

Play Video

Citar este artículo
Soni, S., Agarwal, S., Aggarwal, R., Veerapu, N. S. Reverse Genetics to Engineer Positive-Sense RNA Virus Variants. J. Vis. Exp. (184), e63685, doi:10.3791/63685 (2022).

View Video