A Spray Inoculation Technique to Establish Fungal Infection in Rice Plant Leaves

Published: October 31, 2023

Abstract

Source: Zhang, M., et al. The Plant Infection Test: Spray and Wound-Mediated Inoculation with the Plant Pathogen Magnaporthe Grisea. J. Vis. Exp. (2018).

This video demonstrates a technique to establish the pathogenic fungus Magnaporthe grisea infection in rice plant leaves. The fungal conidia suspension is sprayed on sections of rice leaf, and the disease progression is assessed by scoring the formation of necrotic lesions.

Protocol

1. Spray Inoculation with a Suspension of M. grisea Conidia

  1. Fungal culture for M.grisea
    1. Prepare the oatmeal tomato agar (OTA) culture medium for fungal strains.
    2. Weigh 30 – 50 g of oatmeal, add this to 800 mL of distilled/deionized water (ddH2O), and boil the mixture for 30 min in the electric pot.
    3. Filter the boiled oatmeal juice into the beaker through a piece of gauze.
    4. Add 150 mL of tomato juice and 20 g of agar to the filtrate in the beaker and add ddH2O up to 1,000 mL.
  2. Preparation of experimental materials
    1. Soak about 50 seeds of rice (Oryza sativa) cultivar Lijiangxintuan-heigu (LTH) in ddH2O for 3 d or soak about 50 seeds of barley (Hordeum vulgare cv Golden Promise) in ddH2O for about 1 d.
    2. Wrap the seeds of rice or barley in moist gauze and germinate them on moist filter paper in about 30 Petri dishes with a diameter of 10 cm x 10 cm at 28 °C. The rice seed germination time is about 2 – 3 d, and the barley seed germination time is about 2 d. The relative humidity in the greenhouse is approximately 70%.
    3. Plant the seedlings of the rice or barley in pots using autoclaved potting soil and watering and then cover them with a layer of vermiculite.
    4. Place the plants in a suitable glasshouse or growth cabinet at 25 °C for about 1 ~ 2 weeks.
    5. Cut 3 layers of filter paper in circles with sterile surgical scissors (each circle should have an 8 cm diameter) and place them onto 100 mm sterile plastic plates.
    6. Add ddH2O to each dish to soak the filter paper.
    7. Make sure the filter paper is completely wet but add no extra water.
    8. Remove any excess water with a vacuum pump.
    9. Place 2 sterile toothpicks into the culture dish to support the rice/barley leaves; space the toothpicks ~2 – 3 cm apart.
    10. Collect the leaves of the rice 2 weeks after sowing the seeds or take the leaves of the barley 7 days after sowing the seeds.
    11. Using 4- to 6-leaf seedlings of rice/barley, cut the lower part of the stem at ~5 cm from the top and collect the leaves.
  3. Spray inoculation protocol
    1. Culture the fungal strain on OTA plates in a thermostatic incubator (25 °C) for ~4 d.
    2. Add ~2 mL of ddH2O using a 0.5 – 5 mL pipette to each 4-day-old plate.
    3. With an inoculation loop, scrape the mycelia of the M. grisea wild-type strain and the mutant strain into mycelia debris.
    4. Collect the mycelia debris and transfer it to a new OTA plate. Take the mycelia debris and blow dry on the clean bench.
    5. Cover the plate with 3 layers of gauze to ensure the humidity required for the growth of the conidia in a greenhouse at 25 °C during the day (14 h) and 23 °C at night (10 h) for 24 – 48 h.
    6. Add 2 mL of ddH2O to each dish and scrape the conidia gently with sterile cotton swabs followed by a filtration through 2 layers of lens paper. Be careful not to scratch the surface of the culture medium.
    7. Transfer the conidia suspension into a new 50 mL tube with a 100 – 1,000 µL pipette.
    8. Centrifuge for 5 min at a minimum of 5,000 x g at 25 °C.
    9. Remove the supernatant and resuspend the pellet to give 2 x 104 conidia per mL in a 0.025% (v/v) Tween-20 solution. The Tween-20 solution is usually about 10 – 20 mL.
    10. Pour the spore suspension into a hand-held sprayer.
    11. Spay about 10 mL of the conidial suspension onto the rice leaves of 2-week-old rice seedlings or barley leaves of 7-day-old barley seedlings and incubate them at 25 °C in a dark, humid chamber for ~24 h. Spray the control plants with the 0.025% (v/v) Tween-20 solution.
    12. Transfer the leaves into another moist chamber under fluorescent light at 25 °C for a photoperiod of 12 h.
    13. Record the disease symptoms at 5 d after the inoculation. Examine the diseased rice/barley blades of ~6 cm in length. The evaluation standard is according to the scoring system for blast resistance of the International Rice Research Institute (IRRI). The details of the scoring system for blast resistance are shown in Table 1.
    14. Photograph the leaves to evaluate the infection of the tested strains. The infection was assessed by the number of lesions per 3.6 cm2.

Table 1: A scoring system for blast resistance. The table is cited from the International Rice Research Institute (IRRI).

Scale Description
1 Small brown specks of pin-point size
2 Small roundish to slightly elongated, necrotic gray spots, about 1-2 mm in diameter, with a distinct brown margin. Lesions are mostly found on the upper leaves
3 The lesion type is the same as in 2, but a significant number of lesions are on the upper leaves
4 Typical susceptible blast lesions, 3 mm or longer, infecting less than 4% of the leaf area
5 Typical susceptible blast lesions, 3 mm or longer, infecting less than 4-10% of the leaf area
6 Typical susceptible blast lesions, 3 mm or longer, infecting less than 11-25% of the leaf area
7 Typical susceptible blast lesions, 3 mm or longer, infecting less than 26-50% of the leaf area
8 Typical susceptible blast lesions, 3 mm or longer, infecting less than 51-75% of the leaf area, many leaves dead
9 Typical susceptible blast lesions, 3 mm or longer, infect more than 75% of the leaf area

Divulgaciones

The authors have nothing to disclose.

Materials

Agar AOBOX Biotechnology (China) 01-023
Filter paper GE Healthcare brand(Sweden) 10311387
50-mL tube CORNING(Amercia) 430290
Centrifuge Eppendorf(Amercia) 5804R
Tween-20 Coolaber (China) CT11551-100ml
Culture dish Thermofisher(Amercia) 150326
0.5-5 mL pipette Eppendorf 4920000105
100-1000uL pipette Eppendorf 4920000083
Vacuum pump Leybold D25B
Incubator MEMMERT PYX313
Inoculation ring Greiner Bio One 731175

Tags

Play Video

Citar este artículo
A Spray Inoculation Technique to Establish Fungal Infection in Rice Plant Leaves. J. Vis. Exp. (Pending Publication), e21754, doi: (2023).

View Video